Nikoline

Hi Nikoline,
sorry for causing you inconvenience
It will be in stock on 1/28 on Amazon, as shown in following link
https://www.amazon.com/Thermaltake-Toughpower-Titanium-256-Color-PS-TPG-1500DPCTUS-T/dp/B01KP8S83C/ref=sr_1_4?ie=UTF8&qid=1516859382&sr=8-4&keywords=DPS+G+RGB+titanium
Besides, we will provide all cables in package, including 24pin, CPU, PCIe. etc. as shown in following table

Hi,
I do not have a digital copy of the manual on me, but it is in there if you maybe kept the box?
The screws have threads on both sides, one side shorter than the other and the shorter side screw thread is bigger.
You just screw the short end into the MB side then drop on the block, use the white washers and then the thrumb screws to secure it down.
If you need further help, I will try to dig one up or take a picture of one here.

Hi,
With the Dip switch, you should not have to make any changes if you are running 1 controller, as shown in the picture, that is already set for controller #1.
It only matters when you have more than 1 controller, you can set the controller to any number really, just cannot set 2 controller to the same is all.

Hi,
The PR22-D5 Plus requires 1 molex for power to the pump. For the lighting, it will require the controller supplied to also be connected with also requires 1 molex.
The controller also offers 5 ports, so you have 4 spots open if you want to add in fans or other Plus products to avoid extra controllers.

Hi,
Honestly it does not matter, I have done it both ways. If I had to choose and based on this with the Tower 900 in my exp, I would use the bottom as the IN and the top as the OUT to give you better room for your tube runs.