Jump to content
  • Forum Statistics

    3,813
    Total Topics
    31,151
    Total Posts
  • Member Statistics

    82,945
    Total Members
    16,800
    Most Online
    matti
    Newest Member
    matti
    Joined

Dsurian

Members
  • Content count

    1
  • Joined

  • Last visited

Everything posted by Dsurian

  1. Dsurian

    Core P1 Build; Help?

    Greetings all; working on a mini-ITX build, featuring some ThermalTake tech, and hit a few snags ...was hoping you all could assist. Components List: Intel i7-7700K ASUS Z270i mini-ITX G-Skill TridentZ RGB 2x16GB3600 Samsung 960 Pro M.2 512GB ASUS Poseidon GTX 1080 Ti ThermalTake Core P1 ThermalTake Toughpower iRGB Plus 850W ThermalTake Floe TT Premium 240mm So, I got most everything hooked up, but haven't even bothered with the GPU until I have all the wiring figured out ...and that's the problem. Regarding the Radiator/Heatsink; the data(?) cable for the lighting controller has three connectors: Two connectors are USB Micro-B's; one for the controller, and the other to go ...where? - into a hypothetical second controller? The other connector is a female 9-pin, with a blocked top-right/bottom-left, presumably for the motherboard ...except the ASUS Z270i doesn't appear to have an appropriate header. Closest thing I could find was an 'RGB_Header' male 4-pin, which seems to be specifically for light strips. Regarding the PSU: Again, has a USB Mini-B(?) connector, with a female 9-pin on the end, presumably for the motherboard, yet no appropriate header seems viable. General queries: Any chance all the RGB stuff can sync up? - between the ThermaleTake PSU, x2 Fans, and Pump ...and the ASUS Sync mobo, GPU, and RAM. I put the radiator dead-center in the available bay; any preferences regarding position? - all the way to the top? - all the way to the bottom? - water lines coming from the bottom? - etc. Is there even a difference between the stock Riser Cable I got with the P1 case and the 'TT Gaming' PCI-E Extender? - how could I tell the difference between the two? - if there is a difference, why was the P1 even shipped with the 'practically useless' one?!? ...at the end of the day, really just curious at-the-moment regarding the female 9-pins relating to the Controller and PSU, which ThermalTake seemed to assume I would understand and that my motherboard would have, while TT pointedly didn't explain and my mobo doesn't appear to have. Any alternatives? - can they operate without? - if they're that important, why were they practically ignored in all the documentation?
×