Search the Community: Showing results for tags 'View27'.
Found 1 result
Hey guys! I'm back with another sponsored project! EVGA was generous enough (as always) to send me some of their awesome hardware. This is another EVGA and Thermaltake sponsored project, and I named it "HoloView". Thermaltake was awesome enough (as always) to send me their View 27 chassis and some of their water cooling components. This will be a quick (hopefully) and simple project but will add a special feature to it (hopefully I could pull it off properly). A huge shout out to the sponsors! Here's some of the components that will go in to this project. Yesterday I was able to test fit some components and tear the View 27 down to confirm some measurements and some possible radiator placements. The plan was to rotate the computer case 90 degree so the front panel will be the bottom of the case and the top will be the front panel. Here was my plan, either I will have the 360mm radiator in front and have the 240mm radiator at the bottom or the opposite way around. Originally, I thought I could use the area below the power supply for mounting a 240mm radiator but the power supply that I will be using is a bit long and will have some interference once the power cables are connected. So instead of doing that, I will mount a 140mm fan below the power supply as intake. Now that I have a rough idea of where and what components for water cooling are going to fit in, next will be taking measurements for the custom side panel, cutting out the 140mm fan mount on the back and making the custom front panel for the 240mm radiator. But that will be for the next update. That's it for this first update for the HoloView project. Thank you EVGA and Thermaltake, as always, for giving another opportunity to me for this project! See you in the next one! Ciao!