KingJust Posted March 7, 2016 Report Share Posted March 7, 2016 More updates.. Quote Link to comment Share on other sites More sharing options...
killRMODZ Posted April 20, 2016 Report Share Posted April 20, 2016 Wrapping up the build! Quote Link to comment Share on other sites More sharing options...
usafballer Posted July 16, 2016 Report Share Posted July 16, 2016 Hey All Recently completed a build with this chassis. A quick thermal observation after running a GPU benchmark on a blower style eVGA 1070 all day: I found that the large 200MM fan has the odd effect of increasing GPU temps! That's right, running the 200MM fan actually increases GPU temps by 5-6C. I've tried switching the perforated panel on the right side (near the SDD/HDD cages) to the top, but this only improved things by about 1-1.5C. My fluid dynamics theory is that heat "pools" and is trapped just under the top left bracket with nowhere to go. The front 200MM fan actually pushes this heat further into the corner, giving it less chance to dissipate. Shutting the fan off removes this positive differential allowing that circulating hot air just above the GPU heat sink to bleed off into the case. I found the GPU to hover in the 78C range with front 200mm fan on, and 72C with fan off. Now, the solution is NOT to turn the 200MM off - other components significantly heat up when this is off. CPU and PCH climbed about 8-10C with the 200MM off. It's not a good situation. Thermaltake has some work to improve this case for blower-style GPUs like mine. I think a good start would be to significantly perforate the sheet metal at the top left corner and into the acrylic window. Reduce the size of the acrylic window if necessary. I may try a mod, but I'm afraid of butchering the case, and the problem won't be solved by just putting a few dozen holes in the top panel. The overall chassis needs better ventilation above the GPU side of the case. I should note, I have not yet installed two 80MM exhaust fans - I have a pair coming in on Sunday and I will report back if this significantly helps. You may say "duh bro, you need input and output" - and you might be right. But my goal all along has been to reduce fans to keep the whole setup as quiet as possible. Running this GPU under load in the upper 70s isn't terrible, but I would prefer it run cooler and quieter for better OC headroom. Quote Link to comment Share on other sites More sharing options...
Lizardsqueeze Posted September 5, 2016 Report Share Posted September 5, 2016 Thought i'd toss in a few pics of my new build....any ideas for a gpu in this....will one even fit?😂 Quote Link to comment Share on other sites More sharing options...
G_Board Posted December 19, 2016 Report Share Posted December 19, 2016 Sharing my Build! https://pcpartpicker.com/b/mwwV3C Quote Link to comment Share on other sites More sharing options...
z0mb1e Posted January 16, 2017 Report Share Posted January 16, 2017 Hello there, is it possible to put the motherboard with the size 8.9in x 6.8in, 22.6cm x 17.3cm ? http://imgur.com/a/brgk5 Quote Link to comment Share on other sites More sharing options...
egalsim Posted May 4, 2017 Report Share Posted May 4, 2017 My wood edition Core V1 Quote Link to comment Share on other sites More sharing options...
Googolbyte Posted August 17, 2017 Report Share Posted August 17, 2017 @G_Board Is that a closed system CPU AND GPU Liquid cooling system? That's pretty #### impressive if it is. How did you do cable management? Quote Link to comment Share on other sites More sharing options...
simbant Posted August 18, 2017 Report Share Posted August 18, 2017 Please, put in a USB 3.1 connector in the front. So that I can use the USB 3.1 header from my ASUS m/b. Quote Link to comment Share on other sites More sharing options...
AlyssaTallent Posted October 17, 2017 Report Share Posted October 17, 2017 interesting to read) Quote Link to comment Share on other sites More sharing options...
login211 Posted January 21, 2019 Report Share Posted January 21, 2019 I see some v1 core owners have managed to fit 260mm+ graphics cards into their systems. But I don't see how that is possible since I cannot get my 260mm rx 580 installed. Any videos out there showing a full size GPU install process? Quote Link to comment Share on other sites More sharing options...
Rizzm Posted April 24, 2019 Report Share Posted April 24, 2019 Came here just to say that I, for one, would LOVE to see an update to the V1/F1 designs. The chambered design is awesome, but optimizing space for perhaps SFX PSU and newer, smaller drives could save some volume on the case while also allowing for the largest GPUs and maybe even some larger exhaust fans on the rear. Quote Link to comment Share on other sites More sharing options...
blackiysto Posted September 19, 2019 Report Share Posted September 19, 2019 I really like it, looks like a great design, great use of space! _______________________________________________________________ emi calculator gst login ifsc code Quote Link to comment Share on other sites More sharing options...
Williambecker1 Posted October 16, 2019 Report Share Posted October 16, 2019 Really a awesome that. www.biddingconsultants.co/ Quote Link to comment Share on other sites More sharing options...
ricc Posted October 29, 2019 Report Share Posted October 29, 2019 Hello, I need a new GPU for my ITX build and was planning to buy an RTX 2070 Super. Will a Gigabyte Windforce 3x (286cm long X 50cm wide) fit into this case? Quote Link to comment Share on other sites More sharing options...
wajoy Posted October 31, 2019 Report Share Posted October 31, 2019 Wow, looks great! Can you help me to setup ftp server ubuntu? Quote Link to comment Share on other sites More sharing options...
vgl2000 Posted February 13, 2020 Report Share Posted February 13, 2020 The chambered design is awesome, but optimizing space for perhaps SFX PSU and newer, smaller drives could save some volume on the case while also allowing for the largest GPUs and maybe even some larger exhaust fans on the rear. Quote Link to comment Share on other sites More sharing options...
GabiJohnson Posted February 15, 2020 Report Share Posted February 15, 2020 I really like it, looks like a great design, great use of space! Quote Link to comment Share on other sites More sharing options...
JoshFerguson Posted February 15, 2020 Report Share Posted February 15, 2020 I really want this chassis, but I wish you make it able to take graphics cards up to 300mm long. Quote Link to comment Share on other sites More sharing options...
vgl2000 Posted March 21, 2020 Report Share Posted March 21, 2020 On 7/16/2016 at 8:55 AM, usafballer said: Hey All Recently completed a build with this chassis. A quick thermal observation after running a GPU benchmark on a blower style eVGA 1070 all day: I found that the large 200MM fan has the odd effect of increasing GPU temps! That's right, running the 200MM fan actually increases GPU temps by 5-6C. I've tried switching the perforated panel on the right side (near the SDD/HDD cages) to the top, but this only improved things by about 1-1.5C. My fluid dynamics theory is that heat "pools" and is trapped just under the top left bracket with nowhere to go. The front 200MM fan actually pushes this heat further into the corner, giving it less chance to dissipate. Shutting the fan off removes this positive differential allowing that circulating hot air just above the GPU heat sink to bleed off into the rufus case. I found the GPU to hover in the 78C range with front 200mm fan on, and 72C with fan off. rufus Now, the solution is NOT to turn the 200MM off - other components significantly heat up when this is off. CPU and PCH climbed about 8-10C with the 200MM off. It's not a good situation. Thermaltake has some work to improve this case for blower-style GPUs like mine. I think a good start would be to significantly perforate the sheet metal at the top left corner and into the acrylic window. Reduce the size of the acrylic window if necessary. I may try a mod, but I'm afraid of butchering the case, and the problem won't be solved by just putting a few dozen holes in the top panel. The overall chassis needs better ventilation above the GPU side of the case. I should note, I have not yet installed two 80MM exhaust fans - I have a pair coming in on Sunday and I will report back if this significantly helps. You may say "duh bro, you need input and output" - and you might be right. But my goal all along has been to reduce fans to keep the whole setup as quiet as possible. Running this GPU under load in the upper 70s isn't terrible, but I would prefer it run cooler and quieter for better OC headroom. is it possible to put the motherboard with the size 8.9in x 6.8in, 22.6cm x 17.3cm Quote Link to comment Share on other sites More sharing options...
Candisa Posted March 29, 2020 Report Share Posted March 29, 2020 On 3/21/2020 at 12:21 PM, vgl2000 said: is it possible to put the motherboard with the size 8.9in x 6.8in, 22.6cm x 17.3cm No, this is a miniITX case, your motherboard is microATX. If you like the design of the Core V1 but insist on a microATX board, you could check out the Core V21. I'm checking in here because I have a selection of parts for my new system coming in soon, including a Core V1. Seeing all these modded V1s is very inspiring, but I'll start with just building a normal system in it. Quote Link to comment Share on other sites More sharing options...
Candisa Posted April 1, 2020 Report Share Posted April 1, 2020 I've tinkered with PC's in the past, but this is the very first time I start from scratch. Goals: Keep It Simple Stupid!, upgradability, keeping my 2 HDMI panels + option to add 1 later, reduce noise without compromising airflow, performance/power-efficiency/price. Case: Thermaltake Core V1 Black PSU: CoolerMaster MWE Gold 550 Full Modular Motherboard: Gigabyte B450 I Aorus Pro Wifi CPU: AMD Ryzen 5 2600 CPU-cooler: AMD Wraith Stealth GPU: Gigabyte GTX1650 Mini OC 4G RAM: Corsair Vengeance LPX DDR4-3600 2x8GB M.2 SSD: Samsung 970 Evo Plus 500GB The Core V1 combined with a fully modular 550W PSU ensures easy building and future upgradability. The large and slow 200mm intake fan is also a great start at creating good airflow without introducing a lot of noise. I considered the AMD Ryzen 5 3400G APU, however I believe more cores are the future and the price made stepping up to Ryzen 5 2600 + discrete graphics obvious. Simple doesn't mean compromise nowadays, so I decided to use the best PCIe3 M.2 drive on the market and 16GB of DDR-3600 memory for a fast and snappy system. Unfortunately a beginners mistake couldn't be entirely avoided... I simply selected the cheapest graphics card that provides me with 2 HDMI + 1 DP output. Low power consumption and no extra connection made it seem ideal. Little did I know its single revvy 80mm fan always spins at a minimum of 35% no matter the set fan curve, singlehandedly making the system loud and whiny. DO NOT BUY! In hindsight I could have spent just a little more on a good RX580 card... I have an idea how to make this build a bit more unique, ànd muffle the GPU-noise without choking, but that's for later. Quote Link to comment Share on other sites More sharing options...
governmentjobss Posted April 2, 2020 Report Share Posted April 2, 2020 Great development! Quote Link to comment Share on other sites More sharing options...
Desktopstu Posted May 18, 2020 Report Share Posted May 18, 2020 I have one of these, a snowy one. Really easy to work on. I even managed to shoe-horn an R9 290 in there by removing the front panel which allowed me to get all the power plugs into that beast! ive since replaced the R9 monster with a dinky RX560. Quote Link to comment Share on other sites More sharing options...
BodkinsOdds Posted June 25, 2020 Report Share Posted June 25, 2020 I don't suppose there's a way to swap out the LED on the front panel, is there? Mine is currently set up in my bedroom, and the blue LED is very bright. A lower brightness red LED would make it easier for me to get to sleep while my computer is asleep. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.