Muvs Posted August 26, 2014 Report Share Posted August 26, 2014 Good vremyani day, faced with a bought "Water 2.0 Extrema" computer work well, after installing the cooling laptop stopped off, the monitor says no signal, and all the coolers continue to spin the display shows the system unit as if he is in sleep mode, the buttons do not respond. only helps complete off the power supply from the wall socket. thought to the problem of cooling back to the store !! Today bought a new PSU Toughpower Grand 750W DPS back problem, a completely new computer, went to friends different components have the same problem as if the computer goes into sleep mode, disable usb all good. that can advise? Quote Link to comment Share on other sites More sharing options...
Tt Vincent Posted August 28, 2014 Report Share Posted August 28, 2014 Hello, Could you help to check the following steps: When you were using your original computer, did you install a Toughpower DPS 750W (with USB) power supply? or other non-USB power supply? When you use the new computer, do you also install WATER 2.0? For the new computer, when both the USB cables (from Toughpower DPS 750W power supply and from WATER2.0) all connected to motherboard, does the new computer fail? For the new computer, if you only connect USB cable from WATER2.0 to motherboard, does the new computer work properly? For the new computer, if you only connect USB cable from Toughpower DPS 750W power supply to motherboard, does the new computer work properly? As you mentioned “disable USB all goodâ€, do you mean both the USB cables (from Toughpower DPS 750W power supply and from WATER2.0) are not connected to motherboard; in this way, does the new computer work properly? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.