Versa H15 Build

[Daz]

I have just built my old system into a H15 windowed case, adding 3 RGB fans and soon to be fitting a Water 3.0 120mm system.

 

A few questions from the newbie:

 

1. Where in the case would be best to fit the 120mm Water 3.0 radiator? Keeping in mind that i also want to have my air cooled EVGA GTX970 running as cool as can be.
2. Are there any top vent dust filters that i can buy specifically for this case?
3. When are Thermaltake going to do away with the 1990-esque Riing controller and introduce software controlled fans via the usb header? (The H15 just doesnt have the space for the current system, also removing the covers to change fan speed and such is ridiculous!. But they look cool, so i will let that slide for now...

[ThermalMike]

Hi,

 

My replies to your questions below:

 

Where in the case would be best to fit the 120mm Water 3.0 radiator? Keeping in mind that i also want to have my air cooled EVGA GTX970 running as cool as can be.

For a single 120mm I would suggest to mount it on the back rear fan section, very common for this type of application. Dont worry to much about your GPU, ambient temps should not be fine with this configurations

 

Are there any top vent dust filters that i can buy specifically for this case?

We offer the Matrix D12 and D14 single filters with magnetic edge - http://www.thermaltakeusa.com/accessory.aspx

 

When are Thermaltake going to do away with the 1990-esque Riing controller and introduce software controlled fans via the usb header? (The H15 just doesnt have the space for the current system, also removing the covers to change fan speed and such is ridiculous!. But they look cool, so i will let that slide for now...

Haha i love to see this feedback! Stay tuned!