scottfree1 Posted September 10, 2016 Report Share Posted September 10, 2016 Going to be using the TP850w with a dual Xeon X5680 (12/24 core/thread 2x130w TDP, i7-980x equiv.) This setup needs 2 8-pin EPS connections. From my understanding of the TP850 it has four "rails" (virtual rails??) and I would like the spread the load evenly as possible, any suggestions on keeping everyone happy, cause sharing is caring.. Cpu 1 8-pin EPS Cpu 2 Split 8-pin vs Molex to 8-pin Adaptor vs Pci 8-pin to EPS 8-pin Adaptor Gpu GTX 760 Dual 6-pin Pci TDP 170W Dual Silverstone Tundra Closed loop's 2x20w use mobo headers for pumps/fans (8 4-pin headers avail. all will be used with either setup) vs molex/sata power for pumps (runs @ 100% full time) and mobo header for fans Quote Link to comment Share on other sites More sharing options...
TT0987 Posted September 14, 2016 Report Share Posted September 14, 2016 Hi Scottfree1 After study and I have found your PSU spec here: 12V1 : CPU 8PIN, CPU 4Pin 12V2 : PCIE(modular), CPU 8PIN 12V3 : 24PIN, PCI-E (Non modular cable) 12V4 : SATA, 大4Pin, PCI-E(modular) Because your CPU can consume up to TDP 130W, therefore, I suggest you can take 12V3 (non modular cable) for your GTX 760 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.