Jump to content

Toughpower 850 AP with Dual Xeon x5680's..


scottfree1

Recommended Posts

Going to be using the TP850w with a dual Xeon X5680 (12/24 core/thread 2x130w TDP, i7-980x equiv.) This setup needs 2 8-pin EPS connections. From my understanding of the TP850 it has four "rails" (virtual rails??) and I would like the spread the load evenly as possible, any suggestions on keeping everyone happy, cause sharing is caring..

 

Cpu  1 8-pin EPS

 

Cpu 2 Split 8-pin vs  Molex to 8-pin Adaptor vs Pci 8-pin to EPS 8-pin Adaptor

 

Gpu GTX 760 Dual 6-pin Pci TDP 170W

 

Dual Silverstone Tundra Closed loop's 2x20w use mobo headers for pumps/fans (8 4-pin headers avail. all will be used with either setup) vs molex/sata power for pumps (runs @ 100% full time) and mobo header for fans

Link to comment
Share on other sites

Hi Scottfree1

 

After study and I have found your PSU spec here:

 

12V1 : CPU 8PIN, CPU 4Pin

12V2 : PCIE(modular), CPU 8PIN

12V3 : 24PIN, PCI-E (Non modular cable)

12V4 : SATA, 大4Pin, PCI-E(modular)

 

Because your CPU can consume up to TDP 130W, therefore, I suggest you can take 12V3 (non modular cable) for your GTX 760

 

:)  

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...