Jump to content
Umbrella Corp.

X71 Hard tube build N00b style

Recommended Posts

My first attempt at hard tubing in the X71, I tried to fit a EK-CoolStream CE 280 double at the top and a EK-CoolStream CE 420 Triple at the front but couldn't get the top one in because of clearance.

 

Tubing is not the best and no where near straight, I'm thinking of redoing that centre tube coming from the out port of the CPU block back to the res. And it being my first hard tubing go, I wasted quite a bit of tube. My advice is plan and measure your tube routs carefully first before turning the heat gun on.

 

I'm a little disappointed in this case, however I'm going to try and make the best of it.  

 

Just finished leak testing/flushing last night, will post some more pics/videos of final fill and bleed later tonight. 

 

Thanks for looking  :)

 

post-106951-0-99477800-1484877394_thumb.jpg

 

post-106951-0-38349300-1484877419_thumb.jpg

 

post-106951-0-71003100-1484877432_thumb.jpg

 

 

***UPDATE***

 

 

Added a 320 CoolStream and the Titans to the loop re did all the hardline bar one, got away with shortening it...

 

More Pics:

 

 

post-106951-0-64019200-1488494986_thumb.jpg

 

post-106951-0-15211300-1488494942_thumb.jpg

 

post-106951-0-72047300-1488494976_thumb.jpg

 

post-106951-0-58329700-1488494906_thumb.jpg

 

post-106951-0-36158000-1488494926_thumb.jpg

 

post-106951-0-55145600-1488494957_thumb.jpg

post-106951-0-59563800-1485228480_thumb.jpg

post-106951-0-36018400-1485228490_thumb.jpg

post-106951-0-03205200-1485228496_thumb.jpg

Share this post


Link to post
Share on other sites
On 19/01/2017 at 11:58 PM, Umbrella Corp. said:

Minha primeira tentativa de tubulação rígida no X71, tentei encaixar um EK-CoolStream CE 280 no topo e um EK-CoolStream CE 420 Triple na frente, mas não conseguiu obter o topo por causa da depuração.

 

Tubing não é o melhor e não há perto de reta, eu estou pensando em refazer esse tubo central vindo da porta de saída do bloco de CPU de volta para o res. E sendo meu primeiro tubo rígido, eu desperdicei um pouco de tubo. Meu conselho é planejar e medir suas rotas de tubo cuidadosamente antes de ligar a pistola de calor.

 

Estou um pouco decepcionado neste caso, no entanto, vou tentar fazer o melhor.  

 

Acabou de terminar o teste de vazamento / descarga na noite passada, publicará mais algumas fotos / vídeos de preenchimento final e sangrará mais tarde esta noite. 

 

Obrigado por procurar  :)

 

post-106951-0-99477800-1484877394_thumb.jpg

 

pós-106951-0-38349300-1484877419_thumb.jpg

 

pós-106951-0-71003100-1484877432_thumb.jpg

 

 

***ATUALIZAR***

 

 

Adicionado um 320 CoolStream e os Titãs para o loop re fez toda a barra de linha dura, escapou com o encurtamento ...

 

Mais imagens:

 

 

pós-106951-0-64019200-1488494986_thumb.jpg

 

pós-106951-0-15211300-1488494942_thumb.jpg

 

pós-106951-0-72047300-1488494976_thumb.jpg

 

pós-106951-0-58329700-1488494906_thumb.jpg

 

pós-106951-0-36158000-1488494926_thumb.jpg

 

pós-106951-0-55145600-1488494957_thumb.jpg

pós-106951-0-59563800-1485228480_thumb.jpg

pós-106951-0-36018400-1485228490_thumb.jpg

pós-106951-0-03205200-1485228496_thumb.jpg

Hi,

Working with rigid pipes is not always easy, but it makes work more enjoyable because of the level of difficulty involved.

For the first time it does, I say that it was still very good, considering some of the works I've done with rigid pipes.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×