goliath29 Posted July 4, 2017 Report Share Posted July 4, 2017 I want to install a Commander FT fan controller in my PC with my DPS G 600W power supply. I cannot find if my power supply has a molex connector or not which is needed to power the fan controller. Does the PSU have the connector for the Commander and if so whereabouts is it? Thanks in advance. Quote Link to comment Share on other sites More sharing options...
Denny Posted July 6, 2017 Report Share Posted July 6, 2017 Hi, The Commander FT fan controller require a four pin molex, which should be included in the power supply package. Can you check your cable package again? or can you provide detailed information about your PSU, such as the model name and part number? Quote Link to comment Share on other sites More sharing options...
goliath29 Posted July 6, 2017 Author Report Share Posted July 6, 2017 Hi, I didn't get a cable package as this PC was pre-built. The PSU is a 600w DPS G Bronze, one in the line of the smart PSU units. Thanks Quote Link to comment Share on other sites More sharing options...
Denny Posted July 7, 2017 Report Share Posted July 7, 2017 Hi, I would recommend to contact with your retailer to ask for the 4 pin molex cable because all the cables should be included in the PSU package. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.