anglingtycoon Posted September 20, 2017 Report Share Posted September 20, 2017 So I purchased a Commander FT controller and 9 Riing 120 fans unfortunately it seems. I imagined using the same brand fans would lead to no issues but it appears I am out of luck. They all seem to work fine speeding up and down, but the RGBs dont seem to remember what they are set to so every time the computer goes to sleep or rebooted, the RGB shuts off and does not come back on until I open the back of the case, get to all three controllers and then flip through all the options to get to the right settings for each controller. There is no way to connect the Commander FT to the mobo unfortunately which I figured might help if there is software to control the Riing fans. The only fix im seeing right now is to use three fan splitters and connect each controller into the mobo and the fan controller. While this might work it is a huge hassle and cant imagine that these fans were designed to not be able to hold their settings when used with the same brands fan controller, which has no way to connect to the mobo anyways. If anyones used the fans with this commander FT any help would be appreciated. Thanks Quote Link to comment Share on other sites More sharing options...
anglingtycoon Posted September 20, 2017 Author Report Share Posted September 20, 2017 The fan controller is plugged into the PSU btw Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.