Jump to content

Water 3 Pro fans


Quickliquid

Recommended Posts

Hello,

 

The Y cable is there so you can connect both fans and only have to use 1 fan header off the motherboard instead of 2.

 

Should be no problem.

 

Check the manual here for full details and let us know if you need anything else!

http://www.thermaltakeusa.com/Cooler/Liquid_Cooler_/All_in_One/C_00002064/Water_3_0_Pro/Support.htm

 

Enjoy the cooler!

Link to comment
Share on other sites

  • 3 months later...

Hi,

 

The reason you have a single pin missing from one of the fans is that is a RPM sense pin and the motherboard cannot reference two different fan speeds on a single header so the RPM sense pin only references from one fan as primary but still sends (Pin 4) PWM signal to the fan to actively control the fan speed for both fans while the other two are power and ground.

 

This ensure optimum feedback and equally matched fan speed for your cooler.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...