WanV

Hello , I am AHMAD SAFUAN 28 years oldie, from malaysia well known as wanv Thanks to thermaltake for invitation,i was really active in 2016-2018 something like that  so this year i was quite grateful, to join this to rise my passion about modding again, and i hope can make  a new  masterpiece with my skill so my mod basically i just improving the look of current modded case to look more better or i am going to ruin it  to look like my face.   So for now i announce my project name Is: PROJECT 0.6 so here is the one of early design and alot of fix that i do when in shower thoughts.   Version 1
Version 2

Version 3/Finale
 

 
 
 
 
 

Hello , I am AHMAD SAFUAN 28 years oldie, from malaysia well known as wanv Thanks to thermaltake for invitation,i was really active in 2016-2018 something like that  so this year i was quite grateful, to join this to rise my passion about modding again, and i hope can make  a new  masterpiece with my skill so my mod basically i just improving the look of current modded case to look more better or i am going to ruin it  to look like my face.   So for now i announce my project name Is: PROJECT 0.6 so here is the one of early design and alot of fix that i do when in shower thoughts.   Version 1
Version 2

Version 3/Finale
 

 
 
 
 
 

Thanks for all support and  comment that all of you give me,overall my thought about this case mod is quite tiring and painful to be done,that true i use alot of part with cnc machine to have the shape but overall there alot of hand work and sanding to be done for finishing to get this effect for using such a cheap cnc machine that have finishing problem. alot of part need to be hand fix such a problem with roundness and material flex,overall its a satisfying result for me that i design with Fusion 360 took almost 3 weeks and the end product  look exactly with what i imagine in design.
 
Final photo for PROJECT 0.6







 
sorry for video wobble we already use gimbal but forgot to calibrate, first time doing video sorry about that and enjoy
 

cant wait,   seem  very clean,  i really like the design of what you shared

🤩 ####  WOOW.... love the pictures and Blue glowing & water flowing color. This build is giving me chills.
🥶🥶🥶
 

Thanks for all support and  comment that all of you give me,overall my thought about this case mod is quite tiring and painful to be done,that true i use alot of part with cnc machine to have the shape but overall there alot of hand work and sanding to be done for finishing to get this effect for using such a cheap cnc machine that have finishing problem. alot of part need to be hand fix such a problem with roundness and material flex,overall its a satisfying result for me that i design with Fusion 360 took almost 3 weeks and the end product  look exactly with what i imagine in design.
 
Final photo for PROJECT 0.6







 
sorry for video wobble we already use gimbal but forgot to calibrate, first time doing video sorry about that and enjoy
 

COOL!! I like it 😀

already done assemble all the part will release the photo and video soon

Right side of the case that i test fit before connect between original case panel and left middle panel.


 
bottom side i need to tap all M3 thread to connect middle cover panel that thickness around 5mm only. so i have 1mm each side for clearance,pretty hard.

on of  3D printed part that i use in this build because lack of material and its hard to get new material ASAP this season

 
 
 

today start doing middle connector that need to connect middle left and right frame to support original case panel inside 
 
chamfer side to remove sharp part

Since my cnc machine height is pretty low need to manual drill and make sure its pretty accurate if not it will bend the frame and probably wont fit,quite hard to get it got some scrap too.
 
done look nice and clean
 
 

new base for my case and some part for front panel.

start cutting some panel from original case to fit my shape.

one of side panel done cutting now need to cut side blade that will have 3 part which is blue acrylic>alu 3mm>blue acrylic.


 

 
Cutting Side blade is quite hard since im using cnc router and its quite fragile and easy to flyout because of thin material,before cutting all countour im using 50mm face mill to get shiny effect after face milling, so overall i rather use thick material 😏since its easy to cut and set 

 
after done cutting i do fit test to see it will fit or not since its just a cheap cnc machine sometime its hard to get a good round hole that need to fit the chrome rod.
 

 
 

one of side panel done cutting now need to cut side blade that will have 3 part which is blue acrylic>alu 3mm>blue acrylic.


 

 
Cutting Side blade is quite hard since im using cnc router and its quite fragile and easy to flyout because of thin material,before cutting all countour im using 50mm face mill to get shiny effect after face milling, so overall i rather use thick material 😏since its easy to cut and set 

 
after done cutting i do fit test to see it will fit or not since its just a cheap cnc machine sometime its hard to get a good round hole that need to fit the chrome rod.
 

 
 

Testing and measure some part for design and cutting.and i need to make sure its right since most of my material i need to source it from china ,because im living at rural place and its take 1-2 month to get the material and i can go wrong with it.

Cutting Process start for side distro and main panel ,its quite hard for me since it hitting all my machine size limit because the core p8 case is quite big

 
Machining time that take over 1-2 hours overall to finish plus need to do 2 side.

 
 
 
 
 

eventhough its nice brushed alu,still decide to colour it black ,so today just sanding with scotch brite to get some rough surface before spray to black before machining it.

just started to dissamble the case.this case quite easy to dissamble since all of the join using phillips screw.

today checking some gear to see if can be combine with the case mod

Very Nice color choice
 

some material arrive for this case mod,most of the colour for my build will be aqua/blue alu/black
 

some of hardware arrived. 


 

Hello , I am AHMAD SAFUAN 28 years oldie, from malaysia well known as wanv Thanks to thermaltake for invitation,i was really active in 2016-2018 something like that  so this year i was quite grateful, to join this to rise my passion about modding again, and i hope can make  a new  masterpiece with my skill so my mod basically i just improving the look of current modded case to look more better or i am going to ruin it  to look like my face.   So for now i announce my project name Is: PROJECT 0.6 so here is the one of early design and alot of fix that i do when in shower thoughts.   Version 1
Version 2

Version 3/Finale
 

 
 
 
 
 

Some nice waterblock arrive its time to think what to do with this build.