-
Posts
148 -
Joined
-
Last visited
-
Days Won
12
Content Type
Profiles
Forums
Downloads
Events
Gallery
Blogs
Posts posted by Rob "Deblow" Deluce
-
-
Here is the Main video and also a extra one showing some more lighting options and the RGB plus setup/app.
-
-
-
-
-
-
-
After what feels like forever! the Panther build is complete!
Had some great fun learning new techniques, 3D design, clay and printing along with new cool ways to use the RGB lighting.
The mod is following in my main style, black is always a great personal chose for myself and I like to try keep the case
mods resembling the original case as much I can so this was a tricky one to plan
with all the glass and the fact that its one of the main features I needed, wanted to keep it all and work with it.So on the front I used the glass to make a light up panther face using paints and RGB plus strips.
I tried 3 different designs for the text and pattern on the front and went with the one that was the least in your face to try
keep it clean.
For the right side/back, i wanted to be able to use the advantage of glass to be able to see though the case from both sides,
so I didn't paint it like I would normally, I made some 3D printed props to help give some depth and I cut the motherboard tray in half and positioned the motherboard hanging with the main rear ports facing down and central.
all the wires were then hidden with custom made covers, plastic, carbon and leather.For the top, and very easy to spot and was the one thing i spent the most time on, the build log would give you a idea of the time
spent on the clay sculpted panther but it was far longer in reality lol.I went a step further with the clay to help make it more part of the case, adding lights to the eyes that's controlled via Thermaltakes RGB controller gives me lots of options for the lighting.
the panther can be positioned facing any direction and has a leather base.On the inside is where I did most of the other modding parts, first changing the RAD layout by making new mounts and removing the old ones, the PSU remains in the same place but a custom cover was made to hold the pumps and I also made some 3D patterns in clear PLA that I then spent hours gluing in place and also wrapping the other parts to block the light.
I didn't have RGB reservoirs so I made my own, this is something i have been doing for 5 years now so its become very normal for me.
Lighting was fun to play with and so were the fan covers, like the side covers all the fan covers are magnetic so I can swap them about from side to side and also do the same with the side covers.I always try do something new, something I've not attempted before so I'm happy this all went to plan even with the delays along the way.
Good luck to all the other modders, from what I've seen so far its going to be a hard one to judge!
Rob "deblow" Deluce
-
The main sponsors panel in progress, this along with every other panel including the fan covers are all magnetic so can be removed easy and swapped around from side to side.
MB Back cover.
I was sent the normal W4 waterblock for the CPU that I fitted and modded, then discovered they should have sent the Plus version as its a great improvement in control and also the brightness.
The only problem was that I had no time to mod this ones like I did the original, but it still looks great.
This is the front panel with some airbrushing to assist with the lighting.
-
-
-
I've also used "Wakandan" Proper name Xhosa/Swahili text in a couple of places.
On the reservoirs and the customised 360 RGB panels mean for the side of the Rads.
Firstly the reservoirs, again I used the design and patterns I did at the start and slightly changed them to fit the tank along with the added text.
Can you guess what the text says?
first test run with some clear water, Light set to RGB full rainbow mode at stock until you program them.
-
-
-
-
-
Now back to the main feature for this build, with this being the first time I've attempted to do something like this as part of a pc mod I needed to learn as
progressed from step to step, I also wanted to make the clay stronger so I experimented with resin, couldn't find anyone thats done this before so I
was glad to see it went to plan.The panther is very strong now and its a good job too, several very heavy rolls cinema posters feel from the roof rack and landed on it.
luck for me the only real damage was to the tale and was't hard to fix.
So after filling and sanding out all the cracks I did the resin, primer one last time and other sanding and then I painted it matt, gloss, and satin black
so I could decide what a like best.
ended up going with textured rubber paint.
All thats needed now is the fine details painting, this will be shown in the final photos later this week -
-
-
-
With the fans fitted I started designing the covers, 4 for the front and 3 in the back.
All designed from scratch and 3D printed then painted, two different styles used.
For the back ones I went with a claw type with all the main front of the fan left exposed for maximum air and RGB goodness
For the front fans as they was facing with the back showing I decided to cover all the wire and original plastic with new covers. -
-
-
Rob Deluce - TT Talent 2019 S01
in 2019 CaseMOD Invitational TT Talent - Community League
Posted
Your Name: Rob Deluce
Modding Brand / Media Name: MegaDeblow
Facebook Link: https://www.facebook.com/megadeblow/
Youtube Channel Link: https://www.youtube.com/user/MegaDeblow
Twitter, Instagram, or other social media platforms: https://www.instagram.com/megadeblow/
https://twitter.com/MegaDeblow
https://imgur.com/gallery/Dhoe7
Previous projects/build logs:
https://linustechtips.com/main/topic/363710-project-alternate-4k-build-complete/
https://forums.overclockers.co.uk/threads/project-mega-deblow-watercooled-desk-mod.18563459/
https://community.thermaltake.com/index.php?/topic/75514-uk-rob-de-luce/
https://forums.bit-tech.net/index.php?threads/project-tron-completed-03-17.308014/
https://forums.bit-tech.net/index.php?threads/virtual-thermaltake-modding-trophy-powered-by-scan-completed.300611/page-3#post-4079372
Total fans: 16k
Why do you think you should be the next TT Talent?:
Hello all, Online I'm mostly known as Deblow or Megadeblow, real name is Robert Deluce.
After leaving school I studied art & design followed by graphic design & I'm now working as self employed.
Scratch builds are what I like the most but case modding is also fun to do.
I've done two desk builds, Project alternate being the most popular and also a couple of case mods.
I take pride in my work and along with looks I also try to make changes that help in usability or add extra possibilities and
always try do something new and this year wont be any different, I already have a great plan in mind for this competition and appreciate the opportunity to make it happen.
I think you should pick me because I have experience with TT products and know how to use them to the full potential and ensure there're a important visual as well as practical part of my build.
Thank you all for the opportunity and good luck to all my fellow modders!