Jump to content
  • Forum Statistics

    6.7k
    Total Topics
    44.8k
    Total Posts
  • Member Statistics

    94,561
    Total Members
    16,800
    Most Online
    JenkinKevi
    Newest Member
    JenkinKevi
    Joined

godevskii

Members
  • Posts

    7
  • Joined

  • Last visited

  • Days Won

    1

Posts posted by godevskii

  1. On 10/14/2019 at 7:57 PM, FaafVonFasslich said:

    Hi

    I‘m planning to build my next computer in the 71, but I have a question about the front radiator support. It says that mounting a 420mm rad is possible, but only two 140mm fans are supported. Is it just that the holes are missing to mount the third one (which means it would be possible to mount them to the radiator only) or is there not enough space, which means the fans would’ve to be mounted on the inside?

    You wont be able to mount the 420 with all the 12 fans screws, screwed to the case, there's not enough space. You can screw 10, and the other top 2 just screw the fans directly to the rad through the opening, or you can use the fans on the inside.

    I have a 360 and it maxed out the sliding holes as you can see: 1.JPG

    But for both option be aware that if you go with the 420 it must be a slim one because it can interfere with rads mounted on the top of the case.

  2. @View71you just need to take your time tying the cables before they get to the back in a big bundle, i shortened the fan cables tying them along side of the fans so they have no more nor less length then what they need to get to the splitter, there's actually very good places to put hidden splitters on this case.

    Overall it's still a bit messy on the back, but considering the amount of stuff that i have and using extensions and not fully custom cables i guess it's OK and can't get much better than this. I'm very happy with the case despite having to do a couple hard mods.

    1.JPG

    2.JPG

    3.JPG

    4.JPG

    5.JPG

  3. Hello,

    i decided to share my TT V71 here, almost 9 months after buying the case, only now i had the chance and courage to make hardware swap from a NZXT Switch 810.

    You will see that my living room became a mess with hardware everywhere, 3 rads 1x120+1x240+1x360, 15 fans, 2 fan controllers, ####, it was a nightmare on my NZXT, now i swapped one of the rads and have 1x120+2x360 and dumped the push/pull config and have only push or pull. No fan controller anymore, i used some splitters and connected everything to the MB. Have 8 fans in total, almost half of what i had...

    Also delided the cpu applying liquid metal, and replaced the old reservoir with new bigger better one.

     

    4.jpg

    3.jpg

    2.jpg

    1.jpg

    5.jpg

    6.jpg

    7.jpg

    8.jpg

    9.jpg

    10.jpg

    11.jpg

    12.jpg

    13.jpg

    14.jpg

    15.jpg

    16.jpg

    17.jpg

    18.jpg

    19.jpg

    20.jpg

×
×
  • Create New...