AxelBerger

Thanks for the feedback. Can you tell what settings I would need to change? In regards to USB I can only find the switch to shut down USB when computer goes to sleep, which is however not the case. In regards to power supply I have a 850W power supply but I assume that this is not the issue as the connection is lost when I am just cassualy working on the computer (no big load) but stays online when I am gaming (highest possible load).

Did not work for me. I just tried the same thing, but still after a while the RGP components that are on the controller loose their connection and turn from the preset setting (e.g. all white) into changing RGB color. While gaming this does actually not happen, so I assume that this is not a controller issue but some USB interruption in windows that causes the problem. I just don't understand what that is and why it is not happening when I am running a game.

Some interesting observation I made (by the way, some of the issues I was able to solve for myself, for example the 180 degree rotation of the MX2, which I solved mechanically). All RGB will switch to my preset when I turn on the computer and the TT software kicks in. However when I just work on the computer (e.g. video editing or anything else) the tough fans and the Distroplate that run over the controller loose connection and switch on RGB Rainbow (which I absolutely hat). The Toughram and displays (MX2 and R2) stay on the preset profile. Interestingly while I am gaming the controller does not seem to loose connection and all the components remain in my preset profile. So for me it seems some kind of USB issue under Windows that the Controller cannot handle. other fun story. Two of my four Toughram did not work anymore from one to the other day. The system could not recognize them anymore.

I also do have the problem that the RGB Controller that runs 3 Toughfan 12 RGB and a DP100-D5 Distroplate looses connection to the RGB Plus Software. So when I turn on the computer the MX2 Waterblock, R2 Monitor and 4x Toughram DDR5 start using the color profile that I defined while the toughfans and the Distroplate go on in RGB waves as they do when I turn on the computer. I have changed the USB slots of the motherboard (ASUS ROG Strix Z790E) as well as the USB-C connector of the cables to see if it is an USB issue. My questions are: - can I preset the components controlled by the motherboard (MX2, R2, 4x Toughram DDR5) and the ones controlled by the RGB controller (3x Toughfan 12 RGB, DP100-D5 Distroplate) so that the RGB is shut off when I start the computer and then only start coloring when RGB Plus Software kicks in? - how can I make sure that the RGB Controller does not loose connection to the RGB Plus software once in a while? - how can I make sure that the MX2 and R2 are shut off when the computer has shut down? Currently they are still showing liquid temperature even though the other RGB components are down? - how can I permanently flip the MX diaplay (as I had to install it upside down - see picture) and not only through the RGB Plus software, because when I turn off the computer it still shows liquid temperature but upside down (see picture)? - how can I rotate the R2 image to horizontal permanently as I build it in horizontal and not only in the RGB Plus software, because when I shut off the computer it still displays temperature when all RGB components are down, but it is rotated by 90 degrees (vertical image) Thanks for you help

I do have the problem that the RGB Controller that runs 3 Toughfan 12 RGB and a DP100-D5 Distroplate looses connection to the RGB Plus Software. So when I turn on the computer the MX2 Waterblock, R2 Monitor and 4x Toughram DDR5 start using the color profile that I defined while the toughfans and the Distroplate go on in RGB waves as they do when I turn on the computer. I have changed the USB slots of the motherboard (ASUS ROG Strix Z790E) as well as the USB-C connector of the cables to see if it is an USB issue. My questions are: - can I preset the components controlled by the motherboard (MX2, R2, 4x Toughram DDR5) and the ones controlled by the RGB controller (3x Toughfan 12 RGB, DP100-D5 Distroplate) so that the RGB is shut off when I start the computer and then only start coloring when RGB Plus Software kicks in? - how can I make sure that the RGB Controller does not loose connection to the RGB Plus software once in a while? - how can I make sure that the MX2 and R2 are shut off when the computer has shut down? Currently they are still showing liquid temperature even though the other RGB components are down? - is there a better way to synch the motherboard controlled and rgb controller controlled items? Thanks for you help

Hi everyone, I have some problems with the MX2 Waterblock display (and R2 Monitor). I had to build the MX2 upside down for this built (rebuild of GFF Events), so whenever Windows is not on (RGB Plus Software running) the display shows liquid temperature upside down. The R2 shows data vertically, while the monitor is installed horizontally. My questions are: - how can I permanently flip the MX diaplay (as I had to install it upside down - see picture) and not only through the RGB Plus software, because when I turn off the computer it still shows liquid temperature but upside down (see picture)? - how can I rotate the R2 image to horizontal permanently as I build it in horizontal and not only in the RGB Plus software, because when I shut off the computer it still displays temperature when all RGB components are down, but it is rotated by 90 degrees (vertical image) - can I preset the components controlled by the motherboard (MX2, R2, 4x Toughram DDR5) and the ones controlled by the RGB controller (3x Toughfan 12 RGB, DP100-D5 Distroplate) so that the RGB is shut off when I start the computer and then only start coloring when RGB Plus Software kicks in? - how can I make sure that the MX2 and R2 are shut off when the computer has shut down? Currently they are still showing liquid temperature even though the other RGB components are down? Thanks for you help