ujn2006

My vote goes to John Lacerna

Nice works. GL everyone!

Voted for Philippines

Best of luck to everyone!

Voted for Alex Banks

Voted for Alex Banks

Voted for Stefan Ulrich

My vote goes to Jason Simm. GL!

Voted for Jesse Palacio. GL!

My vote goes to Calen Saddler

I vote for Monia Reuter

Wish you good luck! Hope to see another masterpiece.

Hi friends.
A little late with photos and project, but that was the reason.)
A little about the work done 
1) Identified tanks
2) For the fitting screwed back wall
3) Finally marked out, and screwed the tray to the motherboard
4) For fitting attach the monitor looks good)
In General, I began the process of final Assembly.
According to the plans be customized to the end fit to the motherboard, to suit all chassis, wait for the fans and power supply and finally to collect electrician.

And today came another package from TT.

Thank You! 
 
Hello, I made another unboxing
Second oldest model among the Thermaltake radiators of size 282.5x129x64 mm and intended for installation of two 120 mm fans. Package comes with 8 long screws M3 30 mm 4 screws M3, 8 mm long and 3 plugs with thread G1/4” and a special key for them. A distinctive feature of the RL series radiators – availability of ports G1/4” on both sides of the radiator, which in some cases greatly simplifies the wiring of the circuit. RL240 made of galvanized aluminum, the stated density is a 14 FPI (fins per inch).

Hi All )
Decided to make a quick anpak mechanical sensor of fluid flow from the company Thermaltake.
Of the key features are the following:
1) the Materials from which made the inner elements ABS plastic skimmers and the impeller and PETG tube with a length of 85 mm, as the case
2) sets: a large set of unnecessary pamphlets, the flow sensor (with mounted red impeller, and two red skimmers (part-time stops for the impeller) inlet and outlet), 2 replacement impeller (white and black), 2 sets of interchangeable skimmers (stops) respectively, one set white, the second black color
3) Two compression fitting in black with internal thread G1/4
From myself I will add: the design is a simple one, it is a mechanical flow sensor, end fittings have only one drawback (and it's painted pretty well) on other fronts without complaints, a total of 3 o-rings on each fitting, the ability to combine. In the end, you can use:).

Greetings friends. After some thought I decided to make a controller. In the project there will be many devices with RGB backlight and do not want to fence the garland of the wires of the control units. This quickly decided to make a controller to control the whole electrical project. Here's some specifications that will make the controller
- 2 channel stepper motors
technology quiet control stepper motor StealthChop
channel for 12V RGB strips
channel for RGB backlight Thermaltake
channel managed LEDs WS2812B
- the ability to connect an external display
- 4 analog inputs for sensors
 
to tradition photos while only the Board itself without soldering )))

In General the procedure was completed successfully, under the hood was dry, the pasta which falls off in pieces, now the CPU is planted on the "GM" actually a few photos.

Hello/
Came another parcel, in her memory from V-color, video Card ASUS STRIX 1070, the processor from Intel 7700k. In General photo for the seed and I went to scalp)))

 
ON the key issues
1) waiting for komplektuhu
2) all painting respectively
3) Pinned SSD V-Color RGB backlit))

Hello.
Received the package with the components. Sent the motherboard from ASUS and SSD from V-Color and the tradition of the photo. The case is currently disassembled for painting.

Greetings friends.
ON the question whether it is possible to mix the liquid the simple Answer is Yes, if its composition is the same true with the liquid type "pastel" can not ride because it has a dense color.
Some time passed and now that has changed.
1) was added 2-tube light is made of standard 50 cm tubes and fittings Thermaltake Thermaltake c RGB backlight.
2) Estimate the so-called sole the one in the middle.
3) there are 2 radiator from Thermaltake RL 480.
4) Also, while trying on tanks with pumps them there is the place in my opinion.
And what happened photo))

 

Hello
came the first shipments of iron. While briefly visited, what was to come. In General, it is now possible to accelerate. Follow the news and possibly over the weekend a couple of reviews to do on some interesting elements that deserve special attention.

Greetings to all.
The mechanism is launched and operates quite adequately.A few photos of the build process glasses under drives and video working hoist.

Video link IMG_0265.mp4

Hello/
Exactly my concept of the system should be compact and productive.
 
Finally milled panels, now it became clear where that should be tightened. Generally work for the day and everything should be like a native.

the main feature that the upper part team as the sandwich factory and will be used I\O panel.

A little render, the process is in full swing. I think this week will arrive the panel and will collect.

A start there is not turning back!