Jon Hansz

hotcoolman · January 15, 2017

FrostByte is complete. Final Photos.

Thank you everyone for all your awesome feedback.

January 7, 2017

Thanks Spinal for the awesome feedback.

I build a stand for the hard drive, then made it into a plaque.

The Name of this build is now FrostByte.

The HDD is now hooked up and I have made several custom decals for the outside of the case.

More to come.

Spinalfailed · January 2, 2017

Hiding the massive amount of wires on this build is a challenge.

All the cables are finished and plugged in.

I mounted all the fan controllers and the RGB fitting controllers.

The 2 separate loops are filled. one with blue and the other with white.

The LEDs are finally installed in the eyes.

I have added slits to the dragon eyes and attached the Thermaltake badge under the claw.

The OS is now installed and I can start playing with the lighting.

I wanted to see what I could do with the lighting already in the case before installing more lighting.

Spinalfailed · December 29, 2016

Thank you to Main Frame Customs for supplying me with some Teleios sleeving, wire, pins, and connectors.

All the cables are sleeved and I have laced them together. I just need to finish the PSU ends.

I have also bent and installed all the tubing.

On the back side, I have begun the wire management and fan controller mounting.

December 28, 2016

wishing u best of luck & a happy new year !!

Thank you, Happy New Year to everyone.

I will have more updates tomorrow.

December 25, 2016

Thanks for the awesome feedback guys. Merry Christmas and Happy New Year.

I am finally getting over this cold.

The rest of the dragon is finished with the clear coat and I have removed all the masking.

There are a couple touch up spots that I need to hit, but it really came out great.

I still need to apply the TT badge to the front under the claw, but I'm saving that for last.

Apparently my TT dude approves of the results.

I built a backing for 1 of the reservoir.

Taking perforated aluminum, I cut and bent over the edges.

Then I vinyl covered a metal sheet and added it to the back of the aluminum.

I also tore the SLI bridge apart, painted it, and then built a top for it.

It now matches the rest of the theme.

I have this next week off of work, so I should be able to make a lot of head way.

December 19, 2016

Thanks for the great feedback again guys.

I still have a couple touch ups to do, and I have to re-apply the TT badge, but the front panel is just about done.

Sangheili · December 16, 2016

All the scales are finally complete.

I am almost done painting the spine and wings.

There is still a little work left on the claws to do.

I still have to blend and add more detail to the face, but Its getting a lot closer.

There is a lot more detail going into the teeth as well.

December 16, 2016

Got some more done on the scales.

Pretty tired from being sick, so ill try to get some more done tomorrow.

December 15, 2016

wishing u the best result !!

merry christmas & a happy new year !!

Thank you, Merry Christmas to you.

I'm going to be working on finishing up the painting this weekend.

December 15, 2016

Thanks for the awesome feedback guys.

Patientzero, I will throw up a link for voting once it goes live for ya.

The tail is now caught up to were the body is.

There is still one more layer I need to do on the scales.

I have started by hand painting some of the face and will blend it in with the airbrush.

Next There will be some white and greys added.

Hopefully done by this weekend with paint.

December 12, 2016

Got a little more hand painting done today, I think 1 more layer on the scales and the skin will be complet.

Then all I have is face, spine, wing and hand detail work.

I can hit most of that up with the airbrush.

December 11, 2016

Huge thanks to Mainframe Customs for supplying all the sleeving, wire, pins, and connectors.

If you guys haven't used them, you gotta check them out.

So my airbrushes weren't cutting it, so I had to order out a new one.

In the mean time while I wated for those to come in, I blocked the cards, and did a little work on the inside of the case.

I decided to keep the stock backplate. The Asus logo color is controlable from the mobo.

I hand cut several pieces of vinyl for the mobo. I still have to add more in other areas, but you will get the idea.

The radiator and fans are all mounted, and I was working on the reservoir placement.

I think I will build a back plate to cover the holes behind the reservoirs.

Well, the new airbrush came in. It is by fare a night and day difference. I got an Iwata eclipse hp-cs.

The amount of masking I have had to do on this so fare is just crazy.

You wouldn't think it would take that long to just mask somthing off.

So, I got the base color painted on the dragon.

I cant get the airbrush into all the little areas of the dragon, so I will have to do alot hand painting for the shading.

So I have the first layer of shading done. I shaded each and every scale, and a little on the wings.

I will be working from darks to light, so the dragon will get more white from each layer. I am hoping I will only have 2 or 3 more layers.

Also with the deadline being extended another month, I have some other plans as well.

December 10, 2016

Thanks for some awesome feedback guys, I'll have some pictures to post later today.

December 1, 2016

So it's been a long week.

I built a temporary paint booth in my garage. This thing is working quite well.

The inside of the panels and inside of the case were taped off to keep them black.

I primered the case and all the panels.

After the primary dried, I began masking off the dragon and any part that will be airbrushed.

This process took along time to get everything all taped off.

The outside of the case will be gun metal gray with a glossy clear coat.

I will decide if I want to add anything else to the outside later. I think the dragon coming through the case should be good.

I put on several layers of clear to really shine it up.

When the clear was dry, I pulled all the tape off.

It still needs to cure all the way before I can mask the panels off and start airbrushing the dragon.

I'm going to take this opportunity to start working on the build out.

I started by adding some white highlights to the motherboard.

They were all hand cut vinyl decals.

The blue vinyl came in today. It matches the memory quite well.

I will be re-badging various parts with these vinyls.

December 1, 2016

Thanks for the awesome feedback guys.

I have been really busy this week and will have some photos to post tonight.

I realized it would be easier to do all the painting at my house rather than use a friends paint booth.

So... I put together a temporary paint booth in my garage.

Fixeddoll · November 27, 2016

Thanks for all the awesome feedback guys.

Haven't had very much time this week to post up pictures, but I am just about ready for primer.

I added the left hand ripping through the front of the case.

The claws will be sitting on top the TT logo.

I have also built a top and wove some polystyrene. I will be painting this to look more like woven leather.

The tail is sculpted on top and I have added skin and spines.

I sanded the tail and the body.

The head still needs more sanding, but I should be ready for primer, hopefully tomorrow.

There is still a little more sanding that I need to do on the tail as well.

November 22, 2016

Ok, from all my build logs, everyone wants glowing eyes.

I still have to wire them up with leds, but this is it.

November 21, 2016

Ok, so I made some head way on the face today, but the only thing I need to figure out is if i have time to put some glowing blue eyes in. I'm just not sure I will have time for it. What do you guys think?

November 19, 2016

The face is going slower than I thought. I have a bunch more detail to sculpt.

Then I got a ton more sanding to do.

November 19, 2016

I sanded down the face and added some more spikes.

Now I just need to let this set up a little, then I can add the rest and begin sculpting the face.

Ohh, and here's a look at the panel on the case.

November 18, 2016

Just a quick update, spines have been added to the back.

The hand will need a couple more layers and a bit of sanding.

Alot of sanding in store for me this week.

November 18, 2016

Most of the skin on the body is complete, I still have alot of sanding to do.

Thought I would take a break and show you guys how things are coming along.

I got that feeling it's gonna be a late night.

November 17, 2016

I cut out a basic wing pattern to get a good look at were I was going and how much skin I would have to put on before attaching the wings.

The skin was a little harder to get such a large area, so I had to break it up into pieces and put it together.

When I get to sanding, I should be able to blend it in nicely.

Finaly I can attach the wings to see were I want to go with the rest of it.

I decided to use a second piece of polystyrene under the wing pattern, so I glued it on.

This along with the Magic Sculpt will be plenty strong.

Goal for this weekend is to finish the body, tail, and most of the head.

I would love to be at the point I can start sanding and preping for paint next weekend.

November 13, 2016

After getting everything placed were I wanted, I finished riveting it to the case.

The face is going to have to have multiple layers, so I started sculpting the parts that will get covered up.

When this drys, I will be able to do some sanding then move to the next layer.

While everything sets up on the face, I began work on the body.

I started by sculpting some arms and legs with clay, then proceeded to vacuum for them.

After riveting the legs to the body, I started sculpting the connections between the body and the legs.

I sculpted out muscles and bones, then layed scaled skin over the top.

I am still working on where the wings are going and how I will durably attach them.

Sign In

Forum Statistics

Member Statistics

Profiles

Forums

Downloads

Events

Gallery

Blogs

Posts posted by Jon Hansz