TT CPM

Hi, Good to hear it works, thanks for your support.

Hi, I guess you mean the pump speed, cuz the fan we uses is 500~1400rpm. The reason is the AIO pump is 2 phases, normally case fan is 4 phases, and MB BIOS is designed to read 4 phases numbers, so the RPM you see will be half of the actual number.

Hi, TT rgb plus software currently only can be controlled under admin rights, i will discuss with our R&D team see if we can make it work without admin right in the future.

Hi, got it. you may still try to plug the PWM to CPU Fan 4pin header, see if those fans work ok.

Hi, Sorry for the inconvenience. to better define the issue, please check the attached Debug mode instruction, and please upload the log to us here, we will help you to fix the issue. NeonMaker Debug Mode and Get Log.docx

Hi, The TT SYNC controller does not have maximum fan speed limit, it is simply a hub to pass the command from BIOS to your fan. one thing you can give it a try, connect the PWM cable from TT SYNC controller to CPU fan 4pin header on your MOBO, the header always deliver the full PWM signal. If you tried corsair's controller, fan speed is still around half, i would suggest that check BIOS setting or contact mobo customer service for further help.

Hi, Thank you for supporting Thermaltake. The default WAVE mode (including lighting speed) is a firmware control, we are still working on it to duplicate that lighting speed to TT RGB Plus

Hi, May i know how many controllers you connect? did the fans light up when you power on your PC?

Hi, Water 3.0 ARGB AIOs are only support MB RGB software sync, means you can use asus, bgt or msi's RGB software to control the lighting, but they dont support our TT RGB Plus software. If you like to use our software, you may choose our Floe Riing AIOs and Floe DX AIOs

Hi, CPU@52C is fine, i think it is pretty good. May i know what case fan you are using, like brand? model name? fan speed? do you like RGB?

Hi, the bracket of AM3+ is same as AM2, FM2, you can try it, the bracket should be inside the color box.

Hi, 9 riing quad 12 fans are controlled by our TT RGB Plus software, you can use the controllers comes with riing quad fan, the 9 channel controller you mentioned, is called TT sync controller which cant support 9 qiing quad at the same time, voltage is too high.

Hi, basically, there is no spacial way to remove it, there is a gap at the bottom of the front panel, it can be used to leverage to pull the panel off.

Hello, Right, the water block of FLOE TR4 version is a special design to meet threadripper CPU, though the standard FLOE AIO can fit as well, but just like you said, it cant cover all CPU, but there is no problem with the cooling performance, we have sent our AIO to AMD to test and got approval.

Hi GanjaMonster Pure Plus 12 got better air flow 56 CFM vs 40.6 CFM, but the static pressure is a bit lower than the current fans. My suggestion is it is ok to use pure plus 12 for your AIO.

Hi GanjaMonster Pure Plus 12 got better air flow 56 CFM vs 40.6 CFM, but the static pressure is a bit lower than the current fans.

Hi, Yes, Trio and Quad can be plugged into the same controller, but it must be the controller comes with Riing Quad, which means Quad cant compatible with the Trio controller.

Hi I just checked the mobo, it seems not RGB header, can you check it again. https://tw.msi.com/Motherboard/B365M-PRO-VDH

Hi Sorry for the inconvenience. Can i know which version you installed, 1.3.6?

Hi, Floe DX series AIOs all support LGA1200.

Hi, Thank you for supporting us, the T1000 pure clear coolant only for LCS kits, we may launch it to channel early next year.

Hi, We recently received the same issue reports, all related to ROG Zenith Extreme, we are working on this, right now 1.2.8 works fine with the issue, please try it, let me know if it works, thank you. TT_RGB_Plus_Setup_1.2.8_x64.exe

Hello, Thank you for supporting Thermaltake. Normally, there is a TR4 AIO bracket comes with the AMD Threadripper CPU, could you check the CPU color box, see if you can find the AIO bracket? For the Floe Ring TR4 version, the TR4 bracket is fixed on the water block, it cant be removed, so we cant sell it separately.

We are truly sorry to those whom has been experiencing this issue. we promise we will try our best to help you to sole the problems ASAP! If you are experiencing issues with your Thermaltake Opaque Coolant, please help to contact our support for warranty replacement options. Email Contacts: USA/Canada/South America: support@thermaltakeusa.zendesk.com Europe support@thermaltake.de Australia/ New Zealand rma@thermaltake.com.au International Global Customers: info@thermaltake.com Subject: Thermaltake Opaque Request What we need: 1. Your invoice/ receipt 2. The serial number of the coolant (if you still have the bottle) 3. the color and the qty 4. The photos of the coolant/ liquid cooling system 5. Your shipping address 6. Your Name 7. Phone Number (For shipping purposes) Once your email has been received, please allow 1-3 business days for processing. Due to region availability, some requests may be delayed. Thank you!

We are truly sorry to those whom has been experiencing this issue. we promise we will try our best to help you to sole the problems ASAP! If you are experiencing issues with your Thermaltake Opaque Coolant, please help to contact our support for warranty replacement options. Email Contacts: USA/Canada/South America: support@thermaltakeusa.zendesk.com Europe support@thermaltake.de Australia/ New Zealand rma@thermaltake.com.au International Global Customers: info@thermaltake.com Subject: Thermaltake Opaque Request What we need: 1. Your invoice/ receipt 2. The serial number of the coolant (if you still have the bottle) 3. the color and the qty 4. The photos of the coolant/ liquid cooling system 5. Your shipping address 6. Your Name 7. Phone Number (For shipping purposes) Once your email has been received, please allow 1-3 business days for processing. Due to region availability, some requests may be delayed. Thank you!