-
Posts
115 -
Joined
-
Last visited
Reputation Activity
-
hotcoolman reacted to Boddaker in [USA] Brian Carter
Since Adrenaline is such a potent chemical, it must be handled very carefully. If just one drop should escape from its container, the consequences would be devastating. So first and foremost, construction of the transportation unit is critical, and extreme care in keeping the Adrenaline stable is paramount. That is why these heavy duty shock absorbers will be employed on every corner to ensure that no vibration makes its way into the container..
These heavy duty shock absorbers, normally used on full suspension mountain bikes, will be put to better use here.
Taking 1" square box tubing, I cut eight individual pieces out for mounting the shocks to the inner chamber.
The shock fits inside the bracket, utilizing the mounting hardware that came with it.
All eight chamber mounts done.
For the other end, a slightly different design was needed to mount the shock to the corners of the outer frame. More 1" box tubing was sectioned out.
Cut and drilled to accept the shock bolt.
All mounting brackets done!
These triangle pieces will fit into the corners of the frame.
The top brackets are drilled in the center, and the holes squared.
This keeps the carriage bolt from spinning when the nut is screwed on.
Both pieces fastened together.
A 1" flat washer is used to reinforce the bracket and spread out the load.
Once the frame is prepped, these brackets will then be riveted into place. More soon!
-
-
hotcoolman reacted to MKsoft in [Russia] Maxim Kisin
And so, it's time to front.
Holes nuts. Set.
And small video.
-
hotcoolman reacted to Mathieu Sassanou Heredia in [France] Mathieu Heredia
Thanks for your comments guys, really
And it's done, the mod is finished !!!!!
-
hotcoolman reacted to alexciobanu in [Australia] Alex Ciobanu
A quick look before tubing up! Most of the part were in at this point!
Thanks for checking it out!
Cheers,
Alex
-
hotcoolman reacted to alexciobanu in [Australia] Alex Ciobanu
Gonna keep the updates rolling!
Custom top panel windows piece is done. Smoked piece of acrylic will come over same as the front panel.
All the pieces ready for powder coating. Going to be a gun metal looking colour.
Drilling fan holes to mount with the MNPCTECH grills on the back panel.
Looking awesome with the Riing RGB fans!
Two of the 480mm radiators going in the bottom section of the case with the Thermaltake T33 reservoirs on top on each side. I used the MNPCTECH 480mm acrylic grills to mount the reservoirs to.
And finally, running some Mayhems Blitz cleaning system through the rads. Thanks to PerformancePCs for sending through the kit!
Gotta be cautious with this stuff!
Thanks for checking it out!
Cheers,
Alex
-
-
-
hotcoolman reacted to Tt Andy in [Closed] Prediction Voting
Hello guys and girls,
This event is now closed, thank you all for voting!
Will be releasing the final results and winners within the next couple of days, good luck!
If you've missed out on this giveaway, don't worry there will be many other awesome giveaways coming up so look out for it!!
-
hotcoolman reacted to Mathieu Sassanou Heredia in [France] Mathieu Heredia
Merci les gars !
And thanks Newegg for this awesome gift !!!!
-
-
hotcoolman reacted to MKsoft in [Russia] Maxim Kisin
motherboard msi b85m-g43
Commander FT
Luxa2 Power Bank Solution | S100 Wireless Charging Pad and Receiver Kit
-
hotcoolman reacted to R²MoDs in [Canada] Jonathan Garlit
Hey Guys,
This will be my last update for this week. Nothing much, really. I spend this day testing and doing bends. And for some reason, some stupid reason, I can't find the other (Left door) door for the top panel. Looks like I will be re-doing the left door for the top panel next weekend .
I was able to bend both sides of the top panel frame. And now it's time to bend the sides of the door for the top panel.
Next weekend, I will try to start with the side panels after I re-do the other door for the top panel. Thank you again for dropping in and checking out my progress/update! See you on the next one!
-
hotcoolman reacted to R²MoDs in [Canada] Jonathan Garlit
Hey guys!
Here I am again and I have a small update for the top panel. Spent tons of time filing down the sides and edges of the aluminium sheet.
And let the excruciating filing begin..
And this is how the top panel will look like. Although I still need to bend the edges of the top panel frame that I made. I might try that tomorrow or I might strip off the X9 case to pieces to take some more measurements. The top panel will have 2 opening doors.
Thanks for checking out my work log and see you guys in the next update!
-
hotcoolman reacted to alexciobanu in [Australia] Alex Ciobanu
Hey guys!
This should give you a better idea where I'm going with this build!
After cutting up the back panel I decided I will remake it fully but love that I managed to keep the front panel and can still mount it.
Lots more work to do in remaking the back and both side panels as well as getting new mid bars and the radiator mounting. That should make the case more rigid on an angle like this.
Once this is done I will start working on the second case
Also keep in mind that everything is just mounted temporarily to get a feel of things
Thanks for checking it out and stay tuned for more!
Cheers,
Alex
-
hotcoolman reacted to MKsoft in [Russia] Maxim Kisin
Memory come today AVEXIR - DDR3 Core Series - Quad Channel Kit.
Thermaltake Toughpower DPS G 1050W
MSI GTX 960 2GD5T
Dismantle the nominal cooling system
Installed on the CNC machine to measure the heights of chips.
-
hotcoolman reacted to Tt Andy in [Closed] Prediction Voting
Prediction Voting Event has begin!!
Date: (September 1st ~ September 29th)
Post below who your top pick is for the 2015 Thermaltake CaseMOD Invitational Season 2 for your chance to win one of the listed prizes each week!!
Weekly Prizes
1. Riing RGB 256 color 3 pack (2 Sets)
2. Thermaltake Smart DPS G 750W PSU
3. Water 3.0 Preformer
4. TteSPORTs ISURUS Pro Headset
5. Avexir Core Series Limited Thermaltake Edition
Note: Prizes will be sent out at the end of the event
-
hotcoolman reacted to Tt Andy in [Closed] Pre Event Prediction Voting Thread
Thanks Guys for entering, this event is officially over!!
I will be releasing the winners in the next couple of days, good luck all!!
Don't worry if you missed out, head over to our next event!!
LINK: http://community.thermaltake.com/index.php?/topic/2107-prediction-voting/
-
hotcoolman got a reaction from eugene in [Closed] Pre Event Prediction Voting Thread
My prediction is: the winner will be Russia Maxim.
-
hotcoolman reacted to Tt Andy in [Closed] Pre Event Prediction Voting Thread
2015 Thermaltake CaseMOD Invitational Season 2 has begun!!
Post below who you think will WIN the 2015 Thermaltake CaseMOD Invitational Season 2 for your chance to win one of 10 Riing 120mm High static pressure fans each week!!
Note: Prizes will be sent out at the end of the event
-
hotcoolman got a reaction from Liauchil in [PHOTOS] Weekly Giveaway Prize (Week 4)
Beautiful lighting.
-
hotcoolman got a reaction from mrcapncaveman in [PHOTOS] Weekly Giveaway Prize (Week 4)
Beautiful lighting.
-
hotcoolman reacted in [PHOTOS] Weekly Giveaway Prize (Week 4)
This is for the winners to share their photos when you winners received the prizes!
Hope you guys like the mouse!
You guys can install the Tt eSPORTS PLUS Mobile Application from APP STORE or GOOGLE PLAY...
You guys can record your performance data and share it on to the PLATFORM
HAVE FUN GUYS!
-
hotcoolman got a reaction from Tonyshark in [Closed] [WEEK 4] Tt eSPORTS THERON PLUS+ Weekly Giveaway 5/29 (Fri) ~ 6/4 (Thurs)
Am I seeing a dream? Thanks to Thermaltake and all the other participants!
-
hotcoolman reacted in [Closed] [WEEK 4] Tt eSPORTS THERON PLUS+ Weekly Giveaway 5/29 (Fri) ~ 6/4 (Thurs)
Congratulations to our WEEK 4 LUCKY FOUR who just got themselves the new THERON PLUS Smart Mouse!
Here are the 4 lucky Tt FORUM's usernames:
HyperSpeed76
ShadoWx3Sandy
hotcoolman
Tonyshark
The 4 lucky ones will be contacted via personal message on our Tt FORUM!
NOTE: Lucky ones need to reply the Private Message in 7 days! Or else we will pick another person!
WEEK 5 has already been started! Join now and you might be the next lucky four!