FilLis

[Russia] Sergey Mnev !!!

I vote for Monia Reuter!

Good luck! I wish victory in the contest!

Hello Guys,
Sorry for the delay but without further ado here are the winners!! 
Please send me (Tt Andy) an inbox message before February 14th with your name contact number and address to claim your prize
Please note we will send out the prizes at the end of the event
 View 31 Chassis = achou1
Riing Plus 12 LED RGB Radiator Fan = Sarge
SMART DPS G 600W Bronze PSU = Jessie Carlo

but these stages of voting will be? - "Week 1 Voting Event (January 18st ~ January 24th 2018)
Vote for your favorite modder for your chance to win one of the listed prizes!
Week 2 Voting Event (January 25th ~ Febuary 1st 2018)
Vote for your favorite modder for your chance to win one of the listed prizes!" http://casemod.thermaltake.com/MFCs2/vote.html

Thank you for entering : Event closed
We will announce the winners for both giveaways soon!

Hey guys, 
Thank you all for entering,
Here are the winners! please send Tt Andy a private message with your name, address and contact number. We will send you Your prize at the end of the event!
Riing Plus 12 RGB Radiator Fan TT Premium Edition   O.s.k   Nepharus   zhovnir73   Toughpower Grand RGB 850W Gold Fully Modular Power Supply                                                                                daisy
View 27 Gull-Wing Window ATX Mid-Tower Chassis                                                                               ピオク ジュン
 

Hello guys,
Thanks for entering,
Here are the winners!
Toughpower Grand RGB 650W Gold Full Modular rithemking     Water 3.0 Extreme S alxder     Riing Plus 12 LED RGB Radiator Fan x2 MisterCOM   nKwoel Please send Tt Andy a private message with your name, address and contact number on or before July 1st 2017 to claim your prize

Thank You! 
 
Hello, I made another unboxing
Second oldest model among the Thermaltake radiators of size 282.5x129x64 mm and intended for installation of two 120 mm fans. Package comes with 8 long screws M3 30 mm 4 screws M3, 8 mm long and 3 plugs with thread G1/4” and a special key for them. A distinctive feature of the RL series radiators – availability of ports G1/4” on both sides of the radiator, which in some cases greatly simplifies the wiring of the circuit. RL240 made of galvanized aluminum, the stated density is a 14 FPI (fins per inch).

Hi All )
Decided to make a quick anpak mechanical sensor of fluid flow from the company Thermaltake.
Of the key features are the following:
1) the Materials from which made the inner elements ABS plastic skimmers and the impeller and PETG tube with a length of 85 mm, as the case
2) sets: a large set of unnecessary pamphlets, the flow sensor (with mounted red impeller, and two red skimmers (part-time stops for the impeller) inlet and outlet), 2 replacement impeller (white and black), 2 sets of interchangeable skimmers (stops) respectively, one set white, the second black color
3) Two compression fitting in black with internal thread G1/4
From myself I will add: the design is a simple one, it is a mechanical flow sensor, end fittings have only one drawback (and it's painted pretty well) on other fronts without complaints, a total of 3 o-rings on each fitting, the ability to combine. In the end, you can use:).

Completed work on the painting a bit of the photo. The paint is very neatly laid I painted all by hand. Stand the plan is to spin now I think over the mechanism of the photo painted in Matt black. Radiators in its final form will be combined in two colors black core and red side is a very bright combination of turns, also fasteners also are planned in red color in General to fasteners photo a little later. Finally finished soldering the result is also in the photo.

Greetings friends. After some thought I decided to make a controller. In the project there will be many devices with RGB backlight and do not want to fence the garland of the wires of the control units. This quickly decided to make a controller to control the whole electrical project. Here's some specifications that will make the controller
- 2 channel stepper motors
technology quiet control stepper motor StealthChop
channel for 12V RGB strips
channel for RGB backlight Thermaltake
channel managed LEDs WS2812B
- the ability to connect an external display
- 4 analog inputs for sensors
 
to tradition photos while only the Board itself without soldering )))

Да вполне норм на современные игрушки ее хватит, а концепт подразумевает компактную систему для игр.

Могучая и веселая такая начинка получается... Mighty and funny such a filling is obtained.

In General the procedure was completed successfully, under the hood was dry, the pasta which falls off in pieces, now the CPU is planted on the "GM" actually a few photos.

Hello/
Came another parcel, in her memory from V-color, video Card ASUS STRIX 1070, the processor from Intel 7700k. In General photo for the seed and I went to scalp)))

 
ON the key issues
1) waiting for komplektuhu
2) all painting respectively
3) Pinned SSD V-Color RGB backlit))

Greetings friends.
ON the question whether it is possible to mix the liquid the simple Answer is Yes, if its composition is the same true with the liquid type "pastel" can not ride because it has a dense color.
Some time passed and now that has changed.
1) was added 2-tube light is made of standard 50 cm tubes and fittings Thermaltake Thermaltake c RGB backlight.
2) Estimate the so-called sole the one in the middle.
3) there are 2 radiator from Thermaltake RL 480.
4) Also, while trying on tanks with pumps them there is the place in my opinion.
And what happened photo))

 

Hello.
Received the package with the components. Sent the motherboard from ASUS and SSD from V-Color and the tradition of the photo. The case is currently disassembled for painting.

Интересно, смешению охлаждающие жидкости поддаются - на предмет получения эксклюзивного цвета? Interestingly, mixing cooling fluids give in - to obtain an exclusive color?

Добавить возможности HTCP с дистанционным управлением - SUPER. Add HTCP capabilities with remote control - SUPER.

Hello
came the first shipments of iron. While briefly visited, what was to come. In General, it is now possible to accelerate. Follow the news and possibly over the weekend a couple of reviews to do on some interesting elements that deserve special attention.

Интересная конструкция. Interesting design.

Greetings to all.
The mechanism is launched and operates quite adequately.A few photos of the build process glasses under drives and video working hoist.

Video link IMG_0265.mp4

Hello/
Exactly my concept of the system should be compact and productive.
 
Finally milled panels, now it became clear where that should be tightened. Generally work for the day and everything should be like a native.

the main feature that the upper part team as the sandwich factory and will be used I\O panel.

A little render, the process is in full swing. I think this week will arrive the panel and will collect.