-
Posts
1 -
Joined
-
Last visited
Reputation Activity
-
erickliban got a reaction from EkbergDOF in "ElectricLady" watercooled Core x9
So this is my finished build in a Core x9.
Specs:
CPU: 4790k @4.6GHz - 1.25V
GPU: 2x 290's @1150MHz core
Mobo: Asus Sabertooth z97 Mk-1
Rads: 2x 480mm Hardware Labs BlackIce GTS
CPU Block: EK Supremacy Evo
EK GPU blocks and backplates
EK res and dual d5 pump setup
Feel free to ask any questions i may not have covered.
Bonus points if you can guess my favorite musician.
-
erickliban got a reaction from ThermalMike in "ElectricLady" watercooled Core x9
So this is my finished build in a Core x9.
Specs:
CPU: 4790k @4.6GHz - 1.25V
GPU: 2x 290's @1150MHz core
Mobo: Asus Sabertooth z97 Mk-1
Rads: 2x 480mm Hardware Labs BlackIce GTS
CPU Block: EK Supremacy Evo
EK GPU blocks and backplates
EK res and dual d5 pump setup
Feel free to ask any questions i may not have covered.
Bonus points if you can guess my favorite musician.
-
erickliban got a reaction from Tte Martin in "ElectricLady" watercooled Core x9
So this is my finished build in a Core x9.
Specs:
CPU: 4790k @4.6GHz - 1.25V
GPU: 2x 290's @1150MHz core
Mobo: Asus Sabertooth z97 Mk-1
Rads: 2x 480mm Hardware Labs BlackIce GTS
CPU Block: EK Supremacy Evo
EK GPU blocks and backplates
EK res and dual d5 pump setup
Feel free to ask any questions i may not have covered.
Bonus points if you can guess my favorite musician.
-
erickliban reacted to stealth80 in Project Iced Blood - COMPLETE 16/02/16
Slight change to the cpu > chipset blocks
Loving that PWM plug there So i'm about to go away with work for a while which puts this build on hold for a little while, so heres my to do list (for me as much as others!) Ek 8mm extender needs fitting to the Chipset block as you can see in the picture its not quite parallel. Order and fit EK 970 ACX + Nickel Backplate. Order 1x XSPC Chrome 90 degree fitting (not in stock at the moment). This is the final fittings for the GPU loop. Figure out a way to either make the bitfenix recon work with the pwm hubs and ek pwm pumps or buy a new fan controller. Or buy 4x fan pwm splitter cables for the 8 fans and find another way of controlling the pumps (must avoid connection to motherboard)