-
Posts
30 -
Joined
-
Last visited
-
Days Won
8
Reputation Activity
-
Inony got a reaction from 9biggulp in [Thailand] Krittanon Kidprasert
In the profile of the fan light. I think it will be presented in a pack of 3 through a display stand.
I refer to the actual installation from the case, which is mostly the fan installation area. We usually put 3 on either the front or top.
So I designed a simple stand . My display pack 3 fans for presentations.
I installed all 3 fans and used all 3 connection cables form the bundle box. I separate them from each other for feel free to make light steps.
Then I started working on all 15 profiles. It didn't take me long to learn. The program is very easy to use.
Now I've done it and I'm editing the video for the presentation.
Creating a light step was a very fun experience. Thank you very much for inviting me to participate in this competition.
-
Inony got a reaction from benzten in [Thailand] Krittanon Kidprasert
Thank you Channel CompleteTelevision for more interviews and sub
-
Inony got a reaction from Poonsak Kaewjarus in [Thailand] Krittanon Kidprasert
I took the part cut out and put it to test to check that the size, spacing and holes match the parts that I made new.
Because I cut off the 4 corners which are the load-bearing points and moved the point to the middle. So I must put the new part where the hardware is placed to check the balance of the new weight distribution. and test the operation of the bearings. Lucky !! It'a work fine. 😙
-
-
Inony got a reaction from Thee Theeraphat in [Thailand] Krittanon Kidprasert
Looks like I'm the last person to start posting pictures. I apologize to Thermaltake for my delay.
And thank you very much for those who voted for me. Even though I haven't posted anything yet. hahaha 🤣 Love you all guys.
Thank you for every sponsored brand.
-
-
Inony got a reaction from Intellence in [Thailand] Krittanon Kidprasert
When all the pillars are already installed So I started installing the rest of the hardware.
And start connecting the wires from the various paths that have been prepared before.
After that I added water to the main system to check it wouldn't leak.
I left the pump to run for an hour until I was confident.
After that, I connected the whole system together to final test.
Now I can see BIOS from the small screen that I installed. it means Everything works great.
All hardware is fully detected and correct. After this, I will probably install windows and Tt software.
For the other steps, I probably won't update. See you again when the work is finish.
-
-
-
-
-
-
-
Inony got a reaction from waii in [Thailand] Krittanon Kidprasert
When all the pillars are already installed So I started installing the rest of the hardware.
And start connecting the wires from the various paths that have been prepared before.
After that I added water to the main system to check it wouldn't leak.
I left the pump to run for an hour until I was confident.
After that, I connected the whole system together to final test.
Now I can see BIOS from the small screen that I installed. it means Everything works great.
All hardware is fully detected and correct. After this, I will probably install windows and Tt software.
For the other steps, I probably won't update. See you again when the work is finish.
-
Inony got a reaction from Andrew Makin in [Thailand] Krittanon Kidprasert
When all the pillars are already installed So I started installing the rest of the hardware.
And start connecting the wires from the various paths that have been prepared before.
After that I added water to the main system to check it wouldn't leak.
I left the pump to run for an hour until I was confident.
After that, I connected the whole system together to final test.
Now I can see BIOS from the small screen that I installed. it means Everything works great.
All hardware is fully detected and correct. After this, I will probably install windows and Tt software.
For the other steps, I probably won't update. See you again when the work is finish.
-
Inony got a reaction from Andrew Makin in [Thailand] Krittanon Kidprasert
I look forward to admiring your work and everyone. It's near the deadline now. Good Luck , Bro 🙏 ☺️
-
-
Inony got a reaction from Andrew Makin in [Thailand] Krittanon Kidprasert
When everything is fine So I started putting the parts together to finish the job.
-
Inony got a reaction from Andrew Makin in [Thailand] Krittanon Kidprasert
After that, start assembling the gears. In the base part of the hardware installation area.
I connected the signal cable from the original Front Panel through the Slip ring.
Everything from the bottom was still connected and works fine even though the upper part is spinning
After that, I came to complete the part and Box Light in the pillar part. and install test lights to check the accuracy.
-
Inony got a reaction from Andrew Makin in [Thailand] Krittanon Kidprasert
I moved to work in the base part. As I designed, I will slowly rotate parts of the hardware like a display standby. So I brought the motor to install.
then bring the legs and the original wall to be installed
I tried to bring the created path to install. For check various screws that can be compatible.
you cant't be able to see the bolt holes when the path was installed. because I designed some parts to overlapping.
The pieces that cover the bolt holes are mounted with strong magnets. It will be easy to lift and remove the wall when it needs maintenance.
I put the main leg to check the joints of the part. that it will turn out to be correct.
When everything was fine, When everything was fine, I put the box lights to check. it came out good 🤩
I want to work more. But I have to go to work in other provinces for 4 days. 😩
If I come back, I must hurry to finish this work in time. I hope everything is fine.
-
Inony got a reaction from Andrew Makin in [Thailand] Krittanon Kidprasert
After that, I installed the monitor and PSU in the location that I designed
I think I will not finish it. Everything is just preparation. After installing fans on the radiator and bending tubes.
I will move on to assemble the other parts and then come back to finish the job.
-
Inony got a reaction from Andrew Makin in [Thailand] Krittanon Kidprasert
After that, I started assembling the hardware part. by starting to bring the rivet nut to install in the structure
When the installation point is ready. So I put each piece of hardware together and then brought up and placed at the main structure.
On this side, I made a Distro plate to connect the waterway with the other side.
The hardware installation point of this side, everything came out as I wanted.
-
Inony got a reaction from Andrew Makin in [Thailand] Krittanon Kidprasert
After the primer has been sprayed. I took every piece to spray paint according to the drawings.
Some of them must be two-tone, white-red, I used Masking Tape and then sprayed.
-
Inony got a reaction from Andrew Makin in [Thailand] Krittanon Kidprasert
After test the balance. I'm polishing the putty until the surface is smooth. Then spray paint the primer to all structures and set aside.
-
Inony got a reaction from Andrew Makin in [Thailand] Krittanon Kidprasert
While waiting for the car putty to dry, I removed the case, leaving only the actual structure. and began to cut it out as designed.