CharlesFoed

This is just a thread for discussing any anime we are interested in, have watched, want to watch, or whatever else applies.
 
I am easily a fan of classic anime including Kinnikuman, Fist of the North Star, Lupin the Third, Space Adventure Cobra, Ashita no Joe, Otokojuku, and Mobile Suit Gundam 0079 among others. I'm mainly inclined to classic franchises because I tend to feel MOST anime nowadays is too reliant on or deliberate with their use of fanservice and overly annoying characters compared to back then, thus I tend to avoid most modern animes but direct iterations/spinoffs of an older series (ex. Golgo 13 and JoJo's) or ones consisting primarily of adults (ex. Black Lagoon).
 

This is an image I once made by tracing over existing images of characters and putting them in one massive group pic, all of these except for Mazinger (waiting for better subs to be available online) I have watched at least one full episode of. Unfortunately I lost most of the individual images of each character so I can't really expand the roster without doing it all over again (It's not too difficult aside from Kenshiro and Gundam). I did do one recently of Moguro Fukuzou from Laughing Salesman (Which is my current avatar) but I'm not sure If I'll bother re-making the rest.
 
From left to right...Kitaro (GeGeGe no Kitaro), Ryotsu Kankichi (Kochikame), Mazinger Z, Kenshiro (Fist of the North Star), Lupin III, Astro Boy/Atom, Cobra (Space Adventure Cobra), RX-78 Gundam (Mobile Suit Gundam), Kinnikuman, Cutey Honey, Seiya (Saint Seiya / Knights of the Zodiac).

Hello,
 
I was wondering is Commander FT compatible with Core V71 (with it's stock fans) and can it be used to control the fans of Water 3.0 Ultimate?
 
Core V71 uses 200 x 200 x 30 mm Blue LED fans (600~800rpm) so the next question would be if the fan LED would become ON or OFF after connecting the fan to Commander FT? I don't suspect Commander FT is able to control the LEDs of stock Core V71 Blue LED fans, is it?
 
Thank you!

Hi,
I bought the Theron gaming mouse on May 8th.
 
On June 5th, the sensor stopped working while the other buttons continued to work. I saw other people had some issues with firmware but after trying all the suggestions and trying the mouse on other computers, I am sure it is a hardware issue.
 
When I turned on the computer again the next day, the mouse magically started working with no issues for the entire day. Now today, the mouse has stopped working again with the buttons functioning normally.
 
I sent in an email to support through the website on the 5th but have not yet received a reply yet. I also just moved and cannot find my original receipt..
 
I was wondering if anyone else had these issues and how long it takes for customer service to reply.
 
 
PS. I am from Canada.
 
Thank you

After waiting for a few months I finally got one of my own.  This is a very sturdy, well made mouse pad for the gamer in everyone.  With four rubber feet on each corner, and two spare feet in the box, it doesn't move across the table.  The cord bungee keeps the mouse cord off the table so it doesn't get tangled on items on your desk.  I have found my new favorite mouse pad, get yours today.

Thermaltake Core V71 Full-Tower Chassis


http://www.thermalta...x?id=C_00002231
Experience the next generation of chassis design! Thermaltake has introduced a new concept for more versatility and adaptability to any configuration. The Core V71 full-tower E-ATX case gives PC enthusiasts flexible installation options and seamless operation. Users can keep their systems cool by modifying the chassis for superior liquid cooling or superb airflow. This new chassis is the ultimate powerhouse suitable for any type of PC enthusiast – no matter liquid cooling or extreme airflow.

Supreme Air Cooling System
Core V71 is built with a fundamental airflow-optimized design. Standard equipped with triple 200mm LED fans and a 140mm fan, it is the first chassis in the market that has the ability to house four 200mm fans along with three more 120mm fans, achieving unrivalled airflow.

Extensive Liquid Cooling Support
Core V71 pushes the envelope and utilizes a high-end water-cooling solution that feature front 360/420mm, top 360/420mm and bottom 120/240mm radiators to support extreme performance.

 
Youtube Video

 
Owners list:
DKmann101 http://community.thermaltake.com/index.php?/topic/68-core-v71-owners-club/?p=324
Uber_Tiny http://community.thermaltake.com/index.php?/topic/68-core-v71-owners-club/?p=422
CyberDracula 
http://community.thermaltake.com/index.php?/topic/68-core-v71-owners-club/?p=945
http://community.thermaltake.com/index.php?/topic/68-core-v71-owners-club/?p=2356
zimzoid http://community.thermaltake.com/index.php?/topic/68-core-v71-owners-club/?p=2356
Drevni http://community.thermaltake.com/index.php?/topic/68-core-v71-owners-club/?p=3903
marcnaz http://community.thermaltake.com/index.php?/topic/68-core-v71-owners-club/?p=3959
 
 
 

Core V71 pushes the envelope and utilizes a high-end water-cooling solution that feature front 360/420mm, top 360/420mm and bottom 120/240mm radiators to support extreme performance.

This is for the winners to share their photos when you winners received the prizes!

Ventus Ambidextrous Gaming Mouse
Model: MO-VET-WDLO
 
When creating macros to buttons, doesn't recognise the Control button. Tried creating a Copy (Ctrl-C), Paste(Ctrl-V) and Undo(Ctrl-Z) and assigning to buttons, but all it does is print the letters C, V and Z. Please see attached.
MacroIssue.pdf

I recently got the Commander keyboard combo, however when I tried to set it up for my pc, it would not work. The mouse works fine, however a screen comes up saying that it doesn't recognize the keyboard. I figured it was an issue with the drivers, so I updated my PC drivers, and restarted the computer, but the keyboard still does not work. I am currently running Windows 7, and my motherboard is an MSI Z77A-G41. Is there a set of drivers I still have to install for the keyboard to work? Is the board defective? Or will just not work with my motherboard?

Alright, just bought a new vid card andrealised that my power supply does not have another cable for the PCI-E. My power supply does have 2 other 6 pin ports that should support another PCI-E cable and probably another for Molex or other, but I do not own any of them. Where to look for, so that I won't bust my power supply, or what alternatives do I have ?

“We would like to welcome our new Sponsor Tt eSPORTS.
Tt eSPORTS will begin supporting our North American Division with the teams that play Counter-Strike:GO and league of legends . We are very proud to have them sponsoring myRevenge and we are looking forward to representing them.
With this new sponsor, myRevenge takes a step forward in the competitive scene and another step to becoming one of the best E-sports organizations in the world. Tt eSPORTS is the best when it comes to gaming peripherals designed and engineered for True Gamers.â€
By Team Manager & Captain, David Medina.
 

Thank you guys first of all for the product, i am a big fan of thermaltake, yesterday i purchase the commander gaming combo and it is great i really enjoyed, but, (always a but), it seems that i cant find the drivers or software to configure the mouse, buttons, i have navigate and try to search for it with no luck, also when i turn off my pc the lights of the mouse stay on.
hopefully you can help me guys.
 
thanks..(from Ecuador)
 

Do you know any modders that you think have the skill to be in the next CaseMOD Invitational?
 
All you have to do is simply write down the modders name in this thread and why we should invite him/her and we will see if they are eligible to be invited for CaseMOD Invitational Season 2! 
 
Nomination Event date:  June 1st ~ June 5th
     
Once you have commented in the thread you will automatically be entered to win one of the awesome prizes listed below!        
 

Hi
 
I have this power supply (Thermaltake Toughpower XT 875W):
http://www.thermaltake.com/Power_Supply/Toughpower_Series_/Toughpower_XT/C_00001572/Toughpower_XT_875W/design.htm
 
But i'm worried there's a fuss going around with the Haswell processor's sleep state as I'm upgrading my PC, which causes problems in the power supply. My intel processor is an i5 4460 (Haswell Refresh, might also have it). 
 
http://techreport.com/review/24897/the-big-haswell-psu-compatibility-list
Edit: Its not in the list, but I just want to know for sure...
 
Is the power supply that i have compatible with Haswell cpu? Disabling the processor's sleep state would be better (won't cause any issues)?

I'm trying to decide on an enclosure or docking station for my new 4tb WD RED HDD but am not sure if the "Thermaltake Max 5G Active Cooling HDD enclosure" will support it. Even though it says on the Amazon description that it only supports up to 3tb, this review in the link below says that "unofficially" this device will support a 4tb drive. (http://www.amazon.com/gp/customer-reviews/R1V2MXP5Q5HFXV/ref=cm_cr_pr_rvw_ttl?ie=UTF8&ASIN=B004G8QETI) So I just wanted to check in here to see if any of you folk have any insight for me...
 
Also if I decide to go the Docking Station route, any good recommendations for a good quality built HDD protector case?
The ones I've come across have many complaints about flimsy covers breaking off.
 
Thanks...

Anyone know of this issue? I have the latest driver software installed and my mouse is plugged in and working perfectly. However, I am not able to change anything in the driver software because the software is saying my device is not plugged in. Any help would be appreciated

I posted the above question in the Core X Series thread also, but thought it would get more exposure here.
 
So, any ideas?

This year we ran our first Thermaltake CaseMOD Invitational.
We invited 7 modders from 7 countries to showcase their skills in a casemod Invitational battle!!
 
So far the builds have all come out awesome and the modders are at the completion stages of the build, the time has come when we pick a winner for this years contest!
 
 
Help us crown this year’s CaseMOD Invitational's winner to be in a chance to win awesome prizes from: 
 

 
 
To enter the competition is simple. All you have to do is vote for your favorite mod by selecting your winner and you will be in the draw to WIN!
Reminder: You must be a member to vote on the poll seen at the top of this page, head over to the link below if you are having problems voting
http://casemod2015.thermaltake.com/voteForMe.html 
 
Week 1 Prizes

Week 2 Prizes

 
 
For the modders build logs please refer to the links below
(AU) Stuart Tonks              http://casemod2015.thermaltake.com/ModderProfile_au.html 
(UK) Richi Bowzer              http://casemod2015.thermaltake.com/ModderProfile_uk.html 
(FR) Mathieu Delsuc          http://casemod2015.thermaltake.com/ModderProfile_fr.html 
(US)Nick Blackwell             http://casemod2015.thermaltake.com/ModderProfile_us.html 
(DE)Andy Weber                http://casemod2015.thermaltake.com/ModderProfile_de.html 
(JP) Fabio Moma                http://casemod2015.thermaltake.com/ModderProfile_jp.html 
(TH) Suchao Prowphong    http://casemod2015.thermaltake.com/ModderProfile_th.html

I see that smaller builds are becoming more popular these days
For me, i'm currently using an ATX motherboard but i'm looking to build a smaller mATX build, what kind of motherboard size do you guys prefer the most?