Sarge

Shame you can only vote once..
I would vote for Calen Saddler, Ahmad Syafiq Hamman & Pakawat Chaiboonma if I could :)

Mmmmm so much tasty hardware  And so many fittings! Can't wait to see what you've come up with Peter !  

Ultimately it's gonna go down between Jesse Palacio and Peter Brands... but since even Peter thinks it's gonna be Jesse, I'm gonna go with "Jesse Palacio" too 

Jesse Palacio 

Hi Bro's, like I promised I will finnisch themail Shui Shen like the original plan was. The window channel is under construction and Jim Weist is taking care of it...who else? I hade finally made the right measurements and send him the drawing. So I realy looking forward to complete this. In the mean time I can make you warm with some update pics.
 
https://picasaweb.google.com/114481378113832976201/SHUISHENWaterGod#6297037565225637634
 
https://picasaweb.google.com/114481378113832976201/SHUISHENWaterGod#6297037563020234642
 
https://picasaweb.google.com/114481378113832976201/SHUISHENWaterGod#6297037544835914930
 
https://picasaweb.google.com/114481378113832976201/SHUISHENWaterGod#6297037530478625234
 
https://picasaweb.google.com/114481378113832976201/SHUISHENWaterGod#6297037528934507906
 
Stay tuned!

I'm sure the suspense is killing you 
Crazy so many votes you got, but that wasn't exactly a surprise - great job!

Thanks again every one! Really appreciate it!
 
Here's a last one
 

Here is a video i put together myself of the TIE Fighter Advanced PC! Remember if you like the amount of work i put into this please show your support by leaving me (Corey Gregory) a vote =)

 

http://community.thermaltake.com/index.php?/topic/49112-vote/

 

Thanks again every one of you! 
 
The gif was just to show what I'm busy on, video will be there in one or 2 days
 
For new visitors .. click this image for full photo shoot please.
 

Well #### that looks great

Didn't know a gif counts as a video now  But still looks totally awesome! And like others I do agree white looks best!

Here are the Pictures with LED's turned on and liquid flowing! I tried to take a picture with each RGB colour cycle to there are a few but i hope you all enjoy =)

 

If you enjoy my build please vote for it using this link: http://community.thermaltake.com/index.php?/topic/49112-vote/ my name is Corey Gregory You have a chance to win prizes just be voting.

 



 



 



 



 



 



 



 



 



 



 



 



 



 



 



 



 



 



 



 



 



 



 



 



 



 



 



 



 



 



 



 



 

If you enjoy my build please vote for it using this link: http://community.thermaltake.com/index.php?/topic/49112-vote/ my name is Corey Gregory You have a chance to win prizes just be voting.

Too kind man, i dont consider myself a known modder or anything so it was a great priveledge to be able to work alongside these guys that inspired me =)

Awesome build - great final results! Incredible that it was all done by hand

Thank you for all the support, we have finally completed the build, apart from filling it up, which will be done tomorrow. 
Feel free to vote for us, if you like what we have done. 
Special mention, this build was all completed by hand, no CNC or 3D printing machines were used. 
 

 

 

 

 

 

 
Working on 2 hours sleep, still going strong.
 

 

 

 
Core P5 Feet around the legs. 
 

 

 

 

 

 

 

 

 

 
More photos coming tomorrow. 
 
 
 

All that power in one P5.....Shui SHen  æ°´ç¥ž...cool all your Life !!

 
@https://lh3.googleusercontent.com/-E-MchWIyMf0/V0UFXSDzmkI/AAAAAAAAJ2g/JlOX37HeVIYWsTR4ULMt532qP2rOlcNSwCCo/s640/IMG_0950.JPG
 

Looking really good with that color... 208 is awesome   Shame you ran out of time and couldn't get to use the custom channel window, but I'm sure it's still going to be a great build

Great job Peter ! Glad to see you finished in time - Loving how you made that mousepad
And yes, please make an awesome video showcasing the build

Finally the last fittings also arrived.
 

 
 
So I could finish the last part of the loop.
 

 

 

 
 
And testing if everything still works ..
 

 
 
Time to fill it up
 

 
 
Always exciting
 

 
 
Not a single leak
 

 
 
Next thing is also very exciting ... is the hardware still working?
 

 
 
Awesome when you see on first boot "CPU Fan speed error detected"
That's good
 

 
 
And so the glass panel goes up
 

 
 
Chair also fits perfectly
One last small update and then ... final pics!
 

Lots of progress here guys! Some custom reservoirs, starting the details of the build, priming the build and working on the wings.
 
To kick things off, i measured up the mesh and used some painters tape to mark my cuts out for the wings
 

 

 
This is only one layer of mesh, there will be one layer on the inside and on the outside
 

 

 
Welded some legs to the steel rods inside the ball. The core P5 feet are made from steel so then have been welded to the legs and the plastic core p5 feet slide right over them
 

 
Starting to put a couple layers of prime on
 

 

 
Had an old reservoir so i decided to create two of my own custom reservoirs out of it. Removed the threaded part, sanded it down, and cut the tube in half.
 

 

 

 

 
I then cut out a bottom section for the two halves.
 

 
Time to Tap a G1/4 threading through the acrylic panels.
 

 

 

 
And now for the end caps, I also put a threaded hole in the end caps for an easy fill port.
 

 

 
Time to mend it all together and clean it up
 

 

 

 
Now what would a TIE Advanced be without Darth Vader himself? So I decided to vinyl our reservoirs
 

 

 

 

 
The vinyl will be getting peeled off later on. Time to prime the reservoirs!
 

 

 
A really old dead motherboard comes in handy for some detail parts, I have sourced all kinds of junk from the shed to use for details.
 

 
As you can see, by sanding the motherboard a tad, it reviles the copper circuit inside, i think its a nice touch to that inside area, also got some small pipes to add in.
 

 

 
Printed out an image of a TIE Advanced to i can circle the detail bits i have complete as i progress through.
 

 

 
Working on some of the ball detail so i need to get that curved shape into the detail so it sits flush with the ball.
 

 

 
Lots of hours later and we have some details all glued and ready to go. I used a few old capacitors/caps for some of the details.
 

 
Time to work on the top section of the ball. Measured out where i want my cuts to go.
 

 

 

 
Some more details heated up and formed into the dome shape, that mould i kept really comes in handy.
 

 
A bit of acrylic cement and this becomes a permanent fixture =)
 

 

 
The glue marks will not matter as this will all be painted =)
 

 

 
Added a couple more details so fill in the empty gaps.
 

 
And taped some mesh down to show you guys what i want to do tomorrow.
 

 

 
This mesh will be glued in place with a strong adhesive.
 
I hope you all enjoyed the progress.
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

UPDATE !!
 
Time for another update folks, if been extremely busy so I apologia for the slow rate of update's...the End is near so the updates will come fast now!     To start with I will show you some acrylic illustrating clips where you can see the making off the CPU mounting covers and some other panels you'll come across later on...
 

 
 

 
After the parts where laser I glued them together with Acryfix and this is the result 
 

Corey is here. The Force is with him 
Looking great so far!

This definitely looks interesting - really nice design! Reminds me a bit of the Win98 3D Pipes Screensaver 

Looking great so far Peter, can't wait to see the finished result!