Jump to content
Sign in to follow this  
ribneo

Tom Freeman - Project Kusanagi - #TTUK2020CaseModChallenge

Recommended Posts

Hi Everybody,

I'm Tom from sunny Birmingham, UK. I work as a software engineer / web developer which I've been doing since university and mainly play PC games and run in my spare time.

Been building and modding computers since around 15. My first mod was a side window cut-out and blue CCFL tube lighting, was so proud of that at the time (simpler times). Started water cooling at university on an overlclocked Q6600 which kicked out a lot of heat and kept it up ever since. Current PC is an ITX build with a 280mm and 120mm rad which has been a little workhorse / hotbox for the past year. 

Onto this considerably more substantial build as a result of being selected for the Thermaltake UK 2020 Case Mod Challenge which has been awesome 😄 and the perfect distraction from current events. Been spending the past couple weeks getting everything together for the planned mods. Anyhow, onto the parts list:

  • Thermaltake View 51 Snow
  • AMD 3700X
  • Thermaltake TOUGHRAM RGB 3000MHz 4x8GB
  • ASUS ROG STRIX X570-F Gaming
  • ASUS Radeon RX 5700
  • 500GB Seagate FireCuda 520
  • 14TB Seagate IronWolf Pro
  • Thermaltake Pacific C360 DDC Hard Tube Water Cooling Kit
  • Thermaltake Pacific V-RX 5700 Series Plus GPU Waterblock
  • Thermaltake Water Cooling Pacific Hard Tube Bending Kit
  • 300mm Thermaltake TTMod Sleeved Cables
  • 300mm Thermaltake TTPremium PCIe Extender
  • 850W Thermaltake Toughpower GF1

A couple photos of all the parts received:

DSC_0097_1920_Logo.thumb.jpg.5920a592dd0082c1702107a4eea7c743.jpg

DSC_0106_1920_Logo.thumb.jpg.3370fed1c59d3f01ab829a37bf346dc1.jpg

Thank you to Thermaltake, AMD, ASUS, Seagate and Scan for sponsoring and who've done a great job at getting the parts together in such trying times.

Will be updating this thread over the coming weeks with my progress, at the moment just going to do a quick test set-up and take some case measurements.

Best of luck for everyone in the competition and happy building! 😀

Tom

Share this post


Link to post
Share on other sites

Thought I'd just do a quick update of some progress, so far have dismantled the case and started painting.

The first is just a quick comparison of the silver with the recently released Xbox Controller, pretty pleased with the result, the back of the HDD cage has had a section cut out which is going to be used for power input for lighting / a raspberry pi:

P1030766.thumb.jpg.dc4cd51977d6ce771a740dcc6f911af2.jpg

The raspberry pi mounted to one of the HDD slots (this is going to be used to feed a display showing PC stats):

P1030779.thumb.jpg.d733e70f0315558eb6d2b13d43a727f9.jpg

And various other pictures of progress, going to aim to finish all the smaller parts this week, then move onto painting the larger frame and panels next week:

P1030756.thumb.jpg.6ecc59c631238244522867b2ff85c55e.jpg

P1030768.thumb.jpg.457f3fd101e9488987d832d1970af019.jpg

P1030776.thumb.jpg.ac93ae640f46a7f6bc61e14281a287c4.jpg

P1030775.thumb.jpg.2ec5f4443eeebfd6a237e738ff44a4b6.jpg

Share this post


Link to post
Share on other sites

Just another quick update, started painting the outer panels, the copper colour is a base coat before adding a coat of gold and then red on top, could still do with a couple more coats of red:

P1030785.thumb.jpg.21759655b9c2e152d88f9fffacc23afe.jpg

P1030791.thumb.jpg.01dc57d9bae8d5c2cc550f29fd3d58fc.jpg

Added a bit of grime to the smaller parts of the case which have all been painted (they looked a bit too pristine on reflection):

P1030799.thumb.jpg.748bf48dc7d0b63c93667f0d5cff6de0.jpg

Added DC and Ethernet ports to the HDD access door:

P1030805.thumb.jpg.8e7198cb7a0b973377ab1350b5b9b245.jpg

Cut the hole for the screen at the back (still needs tidying up and the frame painting):

P1030809.thumb.jpg.535f7674b752ac838b88d5862ae46f92.jpg

Will get some time at the weekend when I'm hoping to:

  • Finish up on adding grime / wear to the smaller parts of the case
  • Tidy up the LCD screen's mounting
  • Get some primer on the frame
  • Finish all airbrushing on panels / smooth down surfaces for gloss lacquer on top

Share this post


Link to post
Share on other sites

Another update for this week, received a new delivery of parts, which is everything I need now, thanks Scan Computers and Thermaltake UK :) :

P1030818.thumb.jpg.8f33751fa4b21423e0d9a82d08cc0560.jpg

Almost done on the painting side of things:

P1030853.thumb.jpg.6c559d388db005ec2ef551df0c3e033b.jpg

Also took a chunk off the motherboard tray and gave it a coat of paint:

P1030858.thumb.jpg.3264ce385b4fae78cd8cdcc7553f2698.jpg

And cut two plexiglas panels for the top and bottom to be modded (the top needs some more paint...):

P1030850.thumb.jpg.641f42cbf13eb594fcac30015bbac497.jpg

 

Share this post


Link to post
Share on other sites

Just another update from work over this past weekend, reassembled the case (replacing rivets with screws) so I can add a little grime to it and check on fitting / spacingP1040044.thumb.jpg.5f7be9b53ea3110c8481c219bda4e186.jpg:

I had a broken amp I keep tripping over that's been waiting to go to the tip (when they re-open), but thought I could get creative and incorporate it into the project. I ended up taking it apart and added it's circuit boards to the top:

P1040025.thumb.jpg.44c979e1c7e850ad4ec3f6392051619c.jpg

P1040026.thumb.jpg.85957154c270787c6fb9cace625767c1.jpg

and to the side of the motherboard tray to hide the cabling:

P1040031.thumb.jpg.4bf3f93ccc98a7e3287d7e956d7c2694.jpg

Will hopefully have more updates at the weekend (involving the transformer I salvaged from the amp), hope you're all doing well!

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...