marionette_66 Posted February 19, 2015 Report Share Posted February 19, 2015 Hello, I installed the Max 5 Duo HDD bay in my Windows 7 computer, started Windows, placed a 3.5 2TB WD formatted HDD in the bay, closed the door, flipped the switch to the on position and .... nothing is happening. The light turns from solid blue to solid purple for a couple of seconds, and then it returns to a solid blue. Windows is not showing up the new HDD I have plugged this HDD inside my computer as a test, just like a regular HDD and Windows is happy to show me its contents. I have gone to the Disk Management screen in Windows and it shows no new drive either. I made sure that the connectors from the bay get inserted into the HDD when I close the bay door. Any help will be appreciated. Thanks Roberto HowardAbuh, EkbergDOF and RudyWriltet 3 Quote Link to comment Share on other sites More sharing options...
Tt Andy Posted March 5, 2015 Report Share Posted March 5, 2015 Hello Roberto, Blue LED light indicates that there is power connected, so you wont be able to determine if it is working or not by looking at the LED To help determine what problem is accruing, please try the following steps 1. Make sure that all cables are connected 2. Ensure the SATA cable is not damaged, you can change it to a 3.5-inch wire to test 3. Try with another good hard drive to test Quote Link to comment Share on other sites More sharing options...
Roberttick Posted March 17, 2015 Report Share Posted March 17, 2015 . Quote Link to comment Share on other sites More sharing options...
sgt_carbonero Posted November 18, 2015 Report Share Posted November 18, 2015 did you ever solve your problem? I am having something slightly different where it kicks one drive offline when i mount a Max duo one. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.