ShiftySifter Posted May 28, 2020 Report Share Posted May 28, 2020 Hi everyone. I just built my computer and noticed there is no way to hook up the internal fan controller that controls the front fans only runs at full speed. Is there anyway to connect this to the PWM slots on my MB? Thanks so much Quote Link to comment Share on other sites More sharing options...
Zagdima Posted May 29, 2020 Report Share Posted May 29, 2020 Which fans you have? And controller? But ANY FAN you can connect to motherboard. but need some skills. if you have https://c.dns-shop.ru/thumb/st1/fit/wm/800/650/b97e9e4836082d144ffbedabe4bcae52/63c333a9b0b01ce1b70e0f3d48ccd3409241a5bcc4c1fc35c64bdde2929e6368.jpg connector like this 2 rows 5 pins each. The coloured wires is for fan itself. You can use separate adapters like. Or make yourself. You can find which pin is which over internet. Usually black is ground other for PWM etc. Be carefull. and you can connect it to the motherboard to standart fan connector pin. Quote Link to comment Share on other sites More sharing options...
ShiftySifter Posted May 29, 2020 Author Report Share Posted May 29, 2020 Fans are the stock ones that come in the Commander C31 The fan controller is this one below the one that came pre installed in the case. Is there nothing that lets this controller be connected to the MB? Is there nothing out of the box that TT makes to connect these fans to the MB? Quote Link to comment Share on other sites More sharing options...
Zagdima Posted May 30, 2020 Report Share Posted May 30, 2020 i'm afraid you cannot control them. they just simple uncontrollable fans. As you can see they have like 6 pins on each. and fan using only 2 of them. other 4 goes to rgb light. But this is only my opinion. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.