Jump to content

Questions For Staff Regarding AIO and Case Fans On My First Build


Recommended Posts

Hi, I would like to build a PC for myself using the Floe Riing RGB 360 TT PE AIO liquid cooler, various Riing Trio case fans, and a View 51 Case. These look like quality made, and beautiful parts, and some people say that the RGB lights look even more vivid in person.

I want to put two Riing Trio 20s (exhausting) in the front of the View 51 case, and two Riing Trio 20s (exhausting) in the top. I want to put one Riing Trio 12 (exhausting) in the back. I want to put a Floe Riing RGB 360 Premium (exhausting) in the top on the inside. I want to put three Riing Trio 12s (intaking) along the bottom of the case. I will use the supplied RGB fan controllers (not the 9-port Sync Controller). I will use the TT Windows software to configure the fans and RGB lights. Now I will need to understand some things before I move forward with my purchase:

  -What exactly will happen when I boot into linux? Someone on this forum suggested that settings made in the TT Windows software are stored in 'flash' on the controllers, is that true? Will the fans spin at all? Will they keep the 'curves' that I set using the TT Windows software? Will the RGB lights come on at all? Will they keep the programs I set for them using the TT Windows software? Will the AIO circulate water? Will the water block light up? Will the case fans and AIO respond to the temperature of the CPU?

  -Can I fit two Riing Trio 20s and a Floe Riing 360 TT PE AIO liquid cooler in the top of the View 51 case, with the radiator sandwiched between 2 200mm fans above and 3 120mm fans below? Will the extra 200mm fans increase the airflow through the radiator?

  -How many Riing Trio 20s can I connect to a single controller? I think I will set them up like: (2x Riing Trio 20s + 1x Riing Trio 12) + (Floe Riing RGB 360 TT PE AIO) + (2x Riing Trio 20s) + (3x Riing Trio 12s), with each parenthetic term denoting a group of RGB elements connected to a single controller, for a total of 4 controllers. Is this a good setup?

  -Will Thermal Grizzly Conductonaut work with the Floe Riing RBG 360 TT Premium Edition? Does its waterblock contain aluminum? Are those aluminum screws in the waterblock?

  -How will I know if the AIO pump fails?

  -Do I understand correctly that I only need to connect 1 controller to a USB 2.0 header on the motherboard, and daisy chain the rest from the first controller?

  -Is there anything else I need to consider before I order parts?

 

Here is the build that I'm contemplating:

PCPartPicker Part List: https://pcpartpicker.com/list/N3CWgJ

CPU: AMD Ryzen 9 3900XT 3.8 GHz 12-Core Processor
CPU Cooler: Thermaltake Floe Riing RGB 360 TT Premium Edition 42.34 CFM Liquid CPU Cooler
Thermal Compound: Arctic Silver 5 High-Density Polysynthetic Silver 3.5 g Thermal Paste
Motherboard: MSI MEG X570 GODLIKE EATX AM4 Motherboard
Memory: G.Skill Trident Z Neo 64 GB (4 x 16 GB) DDR4-3600 CL16 Memory
Storage: Corsair MP600 Force Series Gen4 1 TB M.2-2280 NVME Solid State Drive
Storage: Corsair MP600 Force Series Gen4 1 TB M.2-2280 NVME Solid State Drive
Storage: Western Digital Red 8 TB 3.5" 5400RPM Internal Hard Drive
Storage: Western Digital Red 8 TB 3.5" 5400RPM Internal Hard Drive
Video Card: Sapphire Radeon RX 5700 XT 8 GB NITRO+ SE Video Card
Case: Thermaltake View 51 ARGB Edition ATX Full Tower Case
Power Supply: Corsair 1600 W 80+ Titanium Certified Fully Modular ATX Power Supply
Operating System: Microsoft Windows 10 Pro OEM 64-bit
Case Fan: Thermaltake Riing Trio 20 RGB TT Premium Edition 123.53 CFM 200 mm Fan
Case Fan: Thermaltake Riing Trio 20 RGB TT Premium Edition 123.53 CFM 200 mm Fan
Case Fan: Thermaltake Riing Trio 20 RGB TT Premium Edition 123.53 CFM 200 mm Fan
Case Fan: Thermaltake Riing Trio 20 RGB TT Premium Edition 123.53 CFM 200 mm Fan
Generated by PCPartPicker 2020-08-07 19:13 EDT-0400

Link to post
Share on other sites

Hi,

TT RGB Plus only works in Windows, the profile and programs are stored in your hard drive.

If you go with Linux, the products will work as normal, LED lights up no problem, but the software wont activate in Linux and you cant control the products in TT RGB Plus.

Yes, you can fit the fans, please see attached fan support list.

For controllers connection, you will need to use 4 controllers and 4 molex cables, and here is our suggestion, (2 x trio 20 + 1 x controller + 1 x molex 4pin cable), (2 x trio 20 + 1 x controller + 1 x molex 4pin cable), (4 x trio 12 + 1 x controller + 1 x molex 4pin cable), (1 x floe riing 360 aio + 1 x controller + 1 x molex 4pin cable).

Our AIO already have thermal grease applied, you can change a new one if you like. No aluminum in water block, and screws have no contact with coolant in AIO.

You can check pump speed in BIOS, make sure it's still running. 

 Yes, the first controller connects to on board USB 2.0.

 

 

 

 

擷取.JPG

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...