Jump to content

[Philippines] Michael John Lacerna


Recommended Posts

  • 2 weeks later...

Update time! To remove the heat spreaders I need to get the chrome plated parts first, finger nails are great for this part.
20201209-P1113068.thumb.jpg.d526a11555ff3facb1e3588baec8972f.jpg

 

When they get un latched just simply pull them off.

 20201209-P1113070.thumb.jpg.bd67007ce0e75f282d65eaf9c5c6248b.jpg

Without the chrome plated design.20201209-P1113075.thumb.jpg.6626144ec7f5a2fdf08786bf57c54977.jpg

 

Then just slide off the upper portion.

20201209-P1113071.thumb.jpg.d02ff32688fdec7f3032b94c92545e99.jpg

Then you should have this at this point, now I'm ready for some heat gun action. Heat will help us remove the heat spreaders from sticking on the RAM Sticks.

20201209-P1113077.thumb.jpg.4b5ab48f16bef70424fbcedd4cea7d94.jpg

 

20201209-P1113082.thumb.jpg.d007262da0c8b7e85095426881959990.jpg

It was a hard battle but we got one! hahaha just need to do this 3 more times clean them up and I should be ready for re painting the heat spreaders.

If you are going to try something like this please be careful not to ruin your ram sticks.

20201209-P1113084.thumb.jpg.2c01afc0d8b8c792630a4acf92d44f7a.jpg

Link to post
Share on other sites

 

Few updates today, the branding needs to go for now to i'm going to spray them primer.

 

20201215-P1113088.thumb.jpg.97dc4a6c381a6ab90697bfd41038767c.jpg

 

20201215-P1113093.thumb.jpg.e29ef189d459e2d84f0e12ef657e0308.jpg

 

 

Here is a peek at the theme that I'm working on :)

 

P1113096.thumb.JPG.cae221435df5f6438fe0f75943d68c65.JPG

 

I am still waiting for the epoxy primer to dry and as soon as they are I will execute all the plans that I have in mind and be back with more updates. Deadline is near so I hope everything works out fine. 

 

 

Link to post
Share on other sites

Update time! after the primer I did paint each ram with the colors that matches each theme. For this I have the first two sticks that I have finished which are the Arasaka Mantis Blade and Mox themed heat sinks. There are two more that I am still working on which are the Militech and Yaiba Kusanagi. Decided to go with four different references instead of just one then applying it on all four. I think made the modding more fun :) well here goes a barrage of pictures from the stands and the actual modified TOUGHRAM without the custom stands.

1.thumb.JPG.208e62a4de9535c4d6e43e6a977a3a7b.JPG

2.thumb.JPG.ff2f264d86b67ed53bb1c6e6576dbd1c.JPG

3.thumb.JPG.a1d108b5df306cf4d81416c6e8391006.JPG4.thumb.JPG.aee3e446ae6cf50c5c42c95e9a04ec0f.JPG

 

P1113103.thumb.JPG.39d4a7c414ad0f88c61613dcbf981d83.JPG

P1113106.thumb.JPG.f572bf54526bcab6ba0dc7b5217b863e.JPG

P1113110.thumb.JPG.02a9430dc51644b6591ae52ea27bfe3d.JPG

334534.thumb.JPG.429a8d07184da9709ef9a6c7e795a99b.JPG

P1113125.thumb.JPG.301498114b17bc4cd37ce52d002d90ac.JPG

5.thumb.JPG.db88f6a2253ff811fc7b780c2191489b.JPGP1113137.thumb.JPG.11dcb63ffd0775eb34cfc437a750830f.JPG

Here is the Arasaka Mantis Blade

20201221-P1123338.thumb.jpg.e9273793759db2e2b1b7f384d86100b2.jpg

20201221-P1123285-2.thumb.jpg.199355464174bdb7fc2d82dfd7f263eb.jpg

20201221-P1123289.thumb.jpg.2e0213b29f2f2f8ed2c660777b7041b5.jpg

20201221-P1123301.thumb.jpg.c3ada03abfb784ac664af3d2a888f07c.jpg20201221-P1123302.thumb.jpg.fe944e095f039547c5e2a953ade3d7d4.jpg

20201221-P1123369.thumb.jpg.6552aef9cf1858c330050cb550e5f43e.jpg

20201221-P1123411.thumb.jpg.bc1ea0dbe4e6e0d24e3cb13863a51eba.jpg

20201221-P1123412.thumb.jpg.b4d5a76e5c7e59d6a4d10cbd27bee723.jpg

20201221-P1123414.thumb.jpg.cae981a9d6a0b3bf32198b827f706033.jpg

 

MOX

 

20201221-P1123172.thumb.jpg.1846817ebd27bdc2a82aeea9470ad66c.jpg

20201221-P1123177.thumb.jpg.07a00c2799a3003cefda9c816289d3e4.jpg

20201221-P1123188.thumb.jpg.59174dbd72fb2523417af8ca8ae757bc.jpg

20201221-P1123194.thumb.jpg.ccfbbbcc224ba585ea32691602f9965a.jpg

20201221-P1123367.thumb.jpg.6c37f8c09cc4b32aa6f33443f4b8fc38.jpg

20201221-P1123425.thumb.jpg.0b692f634e42ca512fe1f4dea10aa74f.jpg

20201221-P1123426.thumb.jpg.1fb2bb7a4a1e6264d9b255f81d5cf9b1.jpg

Those are all for now, I will be back with a couple more :) have mod on!

 

 

 

 

 

 

 

 

Link to post
Share on other sites
  • 3 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...