kuraiholy Posted January 8, 2021 Report Share Posted January 8, 2021 Hello everyone. I have an issue with the Riing Quad 120mm fans. I bought two three packs from Amazon, with the controller. I have one controller set as 1 via the dip switches, and the second one set to 2 as per the manual. I have fans plugged into 1, 2, and 3 on both controllers. When I start up they rainbow just fine. When Windows loads, I get an error. When I open TT RGB Plus the fans are set up wrong. It sees a fan plugged into 5 that's not there, and it's missing the fan plugged into 2. I can correct this by hitting the power button on the 5th fan to turn it off, then again on the 2nd fan to turn it on. Change all the fans to be Riing Quad...and everything's fine. I do this for Controller 1 and 2. I click save, then to be sure I save that to every profile. When I reboot? I see TT RGB Plus pop up real fast, and all the fans say Lumi Plus, then it goes away. Then I get the same error again, and the wrong fans show up again just like before. It doesn't seem to save the settings. I run the program as admin and everything. Make sure to save my configuration, and reboot. Still....error. What can I do to fix this? Hopefully these pics come in order, but they're pics of the fans, the right settings, the reboot pop up with the wrong settings, the pop up telling me error on controller 1, then opening it to different wrong set settings. Quote Link to comment Share on other sites More sharing options...
kuraiholy Posted January 8, 2021 Author Report Share Posted January 8, 2021 Hey anyone have anything for this? It's somewhat disheartening to pay over 250 dollars for fans and be met with this kind of issue on a fresh install of Windows. Quote Link to comment Share on other sites More sharing options...
Esphion Posted January 10, 2021 Report Share Posted January 10, 2021 On the download page, they have not removed v1.3.8 - that should be a HUGE clue on what to do! I had the same problem. New Riing Trio 12 with controller. Installed it, loaded the software (1.3.9) and I thought my controller was bad. Any fan plugged into 1 worked. Any fan plugged into 3 mostly worked, but I would get the Exclamation Point of Doom on 5 - even with nothing plugged into it - along with the Controller 1 warning splash. I put a fan in spot 5 and sometimes it would work, sometimes it would error, sometimes I needed to reboot - - - a freakin nightmare. No combination seemed to work. I uninstalled Thermaltake Tool 1.0 and TT RGB Plus 1.3.9, then deleted the folder "C:\Program Files\Tt", then deleted the folder "C:\Users\<Your Name Here>\Roaming\Tt". Rebooted, installed 1.3.8, and everything worked the first time, just like you'd expect. I wasted about 6 hours on this and found the solution in another thread. It was a hard forehead smack to see the solution - it was right in front of me the whole time. Never saw it. Nice hardware, but without the corresponding software working it doesn't matter. The whole package winds up being bad. kuraiholy 1 Quote Link to comment Share on other sites More sharing options...
kuraiholy Posted January 10, 2021 Author Report Share Posted January 10, 2021 49 minutes ago, Esphion said: On the download page, they have not removed v1.3.8 - that should be a HUGE clue on what to do!<snip>, but without the corresponding software working it doesn't matter. The whole package winds up being bad. Thank you! We'll try that. I hope 1.4 fixes all of it whenever it comes out too. Quote Link to comment Share on other sites More sharing options...
Frazr58 Posted January 18, 2021 Report Share Posted January 18, 2021 It solved the issue I had before. Now when I boot it comes up with an error that version 1.3.8 cannot find "LibHWinfo.exe". Once I click on the warning the fans and block go back to normal. How do i get rid of that warning? Quote Link to comment Share on other sites More sharing options...
Frazr58 Posted January 19, 2021 Report Share Posted January 19, 2021 Thermaltake RGB Riing Trio 120mm and TT RGB Plus wont retain settings. Have to turn on every time windows restarts. TT RBG won't save settings. Riing Trio controller resets when windows restarts. Hopefully the sentences above will show up in google search and save someone all the trouble I had. Version 1.3.9 is garbage. Can't even believe they haven't reverted back to a previous version. The solution above (1.3.8) solved the problem for the most part but it still threw an error warning. Thermaltake support replied and told me to try installing version 1.3.7 (https://bit.ly/TTRGBPlusV137) and it solved the issue. As soon as windows starts my setting take effect every time and no issues with the software. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.