Jump to content

tt itake rgb can't save RGB setting


Junny Chan

Recommended Posts

  • 2 weeks later...
  • 4 weeks later...

Level 20 RGB Mechanical Gaming Keyboard.
I am having the exact same problem- driving me crazy

Recently sent this to technical support:
When using iTake software (v1.5.0) to customize RGB lighting on keyboard, it does not remember any STATIC, CUSTOMIZED ZONES settings for any PROFILE. The lighting is always reset next time iTake runs (if I close and re-run, or when Windows reboots). This lighting is reset to NONE (the keyboard is black with no lighting).

Note: It remembers STATIC, SINGLE zone light settings, and other PULSE, WAVE, FLOW etc. etc. but NOT when I customize on a per key basis.

I've cleared AppData folder and reinstalled many times.

Link to comment
Share on other sites

  • 5 weeks later...

 Level 20 RGB Mechanical Gaming Keyboard 
(TT iTake Enfine) resseting all my lightning setting after program restart. For example i customize collor on keys and hit Apply button. Evrething works fine but next day i start up my pc keyboard save colors but when i start again TT iTake Engine for cahnge pprofile, it resset all setting. I try save profile but after program restart saved proffiles not wotking.

Link to comment
Share on other sites

  • 1 month later...
Just installed version 1.5.3, have communicated previously several times with tech support. Still having EXACTLY the same problem.

Cheers.

Posted March 16

Level 20 RGB Mechanical Gaming Keyboard.
I am having the exact same problem- driving me crazy

Recently sent this to technical support:
When using iTake software (v1.5.0) to customize RGB lighting on keyboard, it does not remember any STATIC, CUSTOMIZED ZONES settings for any PROFILE. The lighting is always reset next time iTake runs (if I close and re-run, or when Windows reboots). This lighting is reset to NONE (the keyboard is black with no lighting).

Note: It remembers STATIC, SINGLE zone light settings, and other PULSE, WAVE, FLOW etc. etc. but NOT when I customize on a per key basis.

I've cleared AppData folder and reinstalled many times.

Link to comment
Share on other sites

  • 5 weeks later...
On 5/29/2021 at 12:15 PM, Luke Pellen said:

Still having EXACTLY the same problem.

Yep, same issue. What's worse - is the fact that the keyboard itself can keep the settings perfectly fine (until it loses power), so if you configure lighting and then remove iTake from autolaunch so that it won't start again and reset your lighting - it "kinda" works, but it's terribly inconvenient (also you have to terminate iTake via task manager to exit it without reverting your profiles to default).

As far as I can tell - the iTake program just can't apply customized lightning properly. Same thing happens when you try e.g. exporting/importing profiles - it tries to apply a profile, but fails.

Link to comment
Share on other sites

  • 1 month later...

Здравствуйте. Купил данную клаву, при подключении все клавиши работают, Fn клавиши, мультимедиа клавиши вообщем все работает. Устанавливаю софт ТТ иТаке
V1.5.4 , по завершению установки даю загрузится. Выводит рамку термалтейк и пропадает все прога закрылась. Клавиатура перестаёт светится Fn клавиши перестают реагировать, три круглые клавиши светятся и не реагируют. Удаляю прогу, выкл. вкл. компа все начинает работать как прежде, светится, клавиши работают. Если клаву выдернуть из компа и запустить прогу ТТ иТаке
V1.5.4 то прога грузится выводит окно что не подключена клава, втыкаю клаву о снова на клаве ничего не горит, Fn не работает и прога закрывается. Что не так? Система Windows 10 Pro для рабочих станций 21H1.Уровень 20 RGB Cherry MX Speed Silver игровая клавиатура. Только приобрёл.

Link to comment
Share on other sites

  • 4 weeks later...
  • 7 months later...

I FIXED IT!....

There is a utility with ASUS motherboards called "Armoury Crate". I uninstalled this (you must google "Armoury Crate uninstall tool" to fully uninstall it). Also, it can be enabled in your BIOS! and you need to turn it off.

When I uninstalled it, it fixed several issues on my PC.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...