Jump to content

Three different 1000w TT PSUs fail to power system that runs with 850w TT PSU.


gnarlog
 Share

Recommended Posts

Hi there,

I put together a machine powered by a Smart Pro RGB 850w, which I was quite happy with. I added a second GPU, and according to Outervision PSU calculator, my wattage load, should be around 848, and recommended a 1000w PSU. The system still boots and runs with the 850, but I'm slightly hesitant and afraid to run a stress test with it, and as I intend to add more storage anyway, I decided to get a Toughpower Grand RGB 1050. I intsalled it, tried to power up the machine, and the PSU just clicks, but doesn't turn the machine on. I got a replacement unit sent to me -- same result. I tested it with a small graphics card, and it does work then, but as soon as I add an RTX 3070, no joy. Same result with an iRGB Plus 1000w. Yet I can boot up both a 3070 AND a 3090 with the 850w PSU. It almost seems like there is some sort of fail-safe protection in the bigger PSUs that the 850w one doesn't have. That speculation is based on nothing -- this is my first build, and I'm very new to this stuff. Anyone have any idea what might be going on here? Oh, one other note --  I took the iRGB Plus 1000w to a local computer shop and had it tested, and they told me there is nothing wrong with it. Anyway, thanks for reading.

 

-Matt

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...