Jump to content

[UK] Alex Banks


Recommended Posts

  • 4 weeks later...

Alright, I seem to be lagging behind here somewhat eh? Let's kick things off with some pics of the merchandise.


DSC_6159.thumb.jpg.8cb04f87c06a1cbfd180184e7592da33.jpgDSC_6163.thumb.jpg.c0f8e7f2a2d7b6d39176ef4011be981d.jpgDSC_6174.thumb.jpg.22b0d70f9150017d0948e618384e691e.jpgDSC_6181.thumb.jpg.a99708148d5b918c523c4f53e34388a8.jpgDSC_6186.thumb.jpg.f32ff30fea175657345d17fc03b45874.jpg

 

Plan wise, first things first I'll need to get these all disassembled so that I can get a feel for the construction. I'm a bit packed in right this instant with a house renovation, but hopefully I'll be able to get the ball rolling properly very soon.

Link to comment
Share on other sites

  • 2 weeks later...

Well it's all kicking off in the last few hours eh? Sadly I've been dealing with a home central heating system that exploded, alongside a bunch of family commitments, but let's kick things up a notch.

First things first, I need to get these heatspreaders off the DIMMS so that I can assess what the PCB layout is like underneath.

DSC_0001.thumb.jpg.114864dbb60af0be308ae8fb63c11d6c.jpg

Fortunately a little bit of heat and the sticky pads loosen okay enough.

DSC_0002.thumb.jpg.acb258fe693086a01384f8557587131c.jpg

DSC_0003.thumb.jpg.ec3cfc8a6563e5512adebac9c62ed38d.jpg

Okay this is great news, symmetrical LEDs all soldered to the PCB (no LED strips ftw). The memory modules are all on one side though, which means I'll need to take their thickness into account on the other face.

Link to comment
Share on other sites

Now technically I didn't need to do this. The PCB is pretty sparse on these sticks, certainly within reason for modelling manually, but when in Rome... 

First things first, I needed to mount a DIMM securely, if it moves at all during this process, all the data is pretty useless. A Lang centric vice plus some soft jaws is a decent compromise, I just torqued it with my fingers to avoid damage.

DSC_0004.thumb.jpg.18ba00b909a60389cc02db7ed4689dfe.jpg

Now to break out the big guns, this is a Hexagon 7-Axis CMM scanning arm. I normally use it for more complex jobs where detailed mapping of a surface is required, perhaps a bit overkill here but why not?

DSC_0005.thumb.jpg.7cb79b765b1e08c97d300a7b2669f3b9.jpg

DSC_0006.thumb.jpg.31bf19994359d9dcc32edeb765a38347.jpg

DSC_0007.thumb.jpg.74ce19dd46a6a5504427b764b0741d14.jpg

It uses a blue laser to scan down to a resolution of 25 microns, which is nuts.

DSC_0008.thumb.jpg.404d7694197d839b2e44f5974d52021a.jpg

It outputs to raw point cloud data, which I can then save as a mesh and import into Fusion 360.

DSC_0009.thumb.jpg.a9c2edaa241348b1f37b1372d8933362.jpg

What you don't see here is the painstaking process of making a usable solid file. The data from the arm does not convert to this, I have to do it manually. The beauty of the scan though is I have all the measurements and I won't miss any features by accident.

DSC_0010.thumb.jpg.0b341e6861b9dcafa6da70c07c24ffde.jpg

This is the plan, I shall be making a new set of heatspreaders that are inspired by the original design. The originals are very thin aluminium, so are easily damaged during removal, which is unfortunate. I wanted a form for these heatspreaders that closely follows the originals, whilst adding some unique flair to things, all the while being fully functional. What's the point in modding the memory if you can't use it as is?

DSC_0011.thumb.jpg.2eb3a42ed17ffbe7fb368f665302a435.jpg

This is where hopefully the real magic will come in. Yes those lines are all drawn in manually, thousands of them. I'll be engraving the surface using a guilloche technique, that way it should play with the light and have a very striking appearance.

DSC_0012.thumb.jpg.ef204d316f6276062925a78944b818e4.jpg

You can just about get a glimpse of how the pattern will go on this one, I'm excited to see how it will turn out in real life.

Link to comment
Share on other sites

Right, let's get to the nitty gritty then, making the things. Toolpathing these heatspreaders was quite the task, they're going to be cut from 3mm brass plate, which should come out wonderfully with the engraving.

DSC_0013.thumb.jpg.58ebd48851a9665cfff86bfff28ab79b.jpgDSC_0014.thumb.jpg.c43cf34859e6bf691b14d554bfc9a901.jpg

We start by roughing out the outermost contours, this will help prevent the brass from potentially warping whilst on the vacuum bed and possibly damaging my spindle or tools.

DSC_6298.thumb.jpg.ceb21cbde811803197a3ca7790d82331.jpg

DSC_6299.thumb.jpg.3ac7fa5e6b69b9460d00d0717af38441.jpg

The centre section has a trough that runs down the middle, a smaller aluminium button will sit in there to emulate the clip from the originals. I used a 3mm ball mill to get the sides nice and smooth, along with a 2mm endmill for the pockets.DSC_6311.thumb.jpg.951d0325db22311285eb477e20869494.jpgDSC_6318.thumb.jpg.76255d89ad0b37547924f41bf7df6ec8.jpg

The material is then given a rough facing op, this levels the top surface to the correct dimensions. I say rough, but it's still incredibly reflective and smooth.

DSC_6324.thumb.jpg.0c528ca3c2e24a3274972e3234b9249d.jpg

DSC_6334.thumb.jpg.2a2f0c7d123d71e0a5266866d965aa79.jpg

Finally we have the engraving, I haven't had the time to edit up the remaining bits and pieces yet, so those will have to go up a bit later, but this should give you a good idea of things.

DSC_6388.thumb.jpg.9f696ed7a0ca7fd40544bec029ebae8b.jpg

DSC_6393.thumb.jpg.4b699c405b929c66e1bc717d6f07625a.jpg

Link to comment
Share on other sites

Well I'd wanted to get these images up last night but my internet was just having none of it, running off my phone currently so it's a bit of a pig getting anything uploaded at all.

So with the heatspreaders engraved (which was a cool 14 hours of machining time!), the next step was to diamond finish the tops. This step adds a huge amount of contrast to the engraving, as well as removing any burrs, it also leaves an incredible polished finish. As the name suggests, this tool is literally a huge diamond brazed onto a fly cutter, you have to take off only a 0.02mm layer or else the cutter can be damaged.

DSC_6416.thumb.jpg.eb3cae7a09a6b35e693a014611d1efd0.jpg

The results do speak for themselves though.

DSC_6415.thumb.jpg.7bc7e13d192be03747bea8c842b47861.jpg

DSC_6434.thumb.jpg.ced92841551d70ac27e778fe55d174b8.jpg

DSC_6436.thumb.jpg.f36ef80764d3111f563d9e259beda460.jpg

DSC_6439.thumb.jpg.17683ebfb5798ba076f887ef92f012e4.jpg

After the top sides were finished, I had to flip the parts over and re-machine from the back in order to add all the recessed areas for the memory modules and LEDs.

DSC_6453.thumb.jpg.f07deafdbe9d24d8d656f539ccfa2151.jpg

Link to comment
Share on other sites

Okay for upload safety I'm dividing these posts up, just in case somethings fails along the way.

With the brass components done, it was time to tackle the little aluminium buttons that go on the front, alongside the lightbars. The buttons were fairly straightforward, just a matter of machining down some 2mm aluminium and surface profiling it with an arc and a long chamfer.

DSC_6467.thumb.jpg.36ffc2c529bb571b1e1eb562a1e9672f.jpg

Even with the vacuum table, these parts are too small to be held down easily, so I used tabs to make sure they wouldn't fly away during cutting.

DSC_6479.thumb.jpg.b5f7465dd0d3998430bcee98a7d92fc5.jpg

For the light bars, I wanted to break away from just using a clear/frosted diffuser. I know I know, the RGB won't be so clear with a coloured layer, but I think it'll be worth it for the desired look. I had two acrylic varieties to choose from, one a glass-effect version, which I had frosted with some sand paper, the second a darker matte green. To cut the light bars, I made use of a technique called window machining. This is where you machine the part/s embedded within a frame, you then leave the parts attached physically to the frame until the very end. This allows you to support small parts and keep them well located for multiple operations.

IMG_3233.thumb.jpg.ec032785c3114f1ee9b428f5db48f876.jpg

DSC_6500.thumb.jpg.a192b5778fd5937fbec6658fc533ac9e.jpg

Link to comment
Share on other sites

With the parts finally all cut, it came to finishing and assembly time. One really cool thing about brass is that you can treat it with different chemicals in order to develop a patina on the surface. As good as the raw brass parts look, you can achieve some really awesome things via treating the metal, so I figured I may as well go and try that for half of the heatspreaders.

DSC_0015.thumb.jpg.a448d60199fbfbdb78c28d99754dc3b0.jpg

After giving the halves a good wash in the ultrasonic cleaner, I then dipped them into a cold bluing solution. This process only takes a few minutes, the patina starts to develop pretty much instantly as you dunk them. After a couple minutes, I retrieved the heatspreaders, then sanded them back using a 4000 grit soft pad that was soaked with cleaning solution. This helps to even out the surface deposits and promote a better finish. I let them soak for a few minutes more in the blueing solution, then sanded again until I was happy with the appearance.

DSC_0016.thumb.jpg.4e1cb658aa2bb5ab28df301a6c072875.jpg

DSC_0017.thumb.jpg.12a6436c38b6b3c3813146eea7a19b5a.jpg

DSC_0021.thumb.jpg.21dbada4e8b2d2314a9d93e91d195be5.jpg

Finally, I added some thermal pads to the inside faces, then carefully stuck the halves together. The sticks can be taken apart fairly easily still as none of the adhesives were permanent.

DSC_0018.thumb.jpg.b5ecd5f2dd81e83ccb56a0817a24c268.jpg

DSC_0019.thumb.jpg.dcdd5e4e9550a955faf792f8172dd3b3.jpg

DSC_0020.thumb.jpg.d579c398dabf6c8bbe26c83d548bb391.jpg

Link to comment
Share on other sites

And here we are! Thank you to everybody who's followed along and especially for all the votes I received in the prediction stage. Given I didn't ask for votes anywhere, I'm really touched by how many people chose to back me, hopefully the results are worth it!

 

Without further ado, I present my entry for the Thermaltake RAM Mod Invitational Season 1. Now the question is, are you one for the light side?
DSC_6530.thumb.jpg.7c7ab4199c0317fe4514e3b1d57522f0.jpgDSC_6562.thumb.jpg.961b426ab90269904d4a65f796b7c2d0.jpgDSC_6567.thumb.jpg.d4712ea174f9e0963921ac3a58266c6b.jpgDSC_6569.thumb.jpg.7aeffd624214de4eb522b1b0b2a8799d.jpgDSC_6571.thumb.jpg.52ca9f08a4ca4e9d5debd369b3c6d147.jpgDSC_6578.thumb.jpg.c9eaa7cbb5683c7ada37688da1a159f4.jpg

Link to comment
Share on other sites

  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...