Jump to content

[India] Vinay Agrawal


Recommended Posts

  • 1 month later...
  • 3 weeks later...
  • 2 weeks later...
  • 4 weeks later...

now getting to the structural supports, getting it into shape

 1718766229_WhatsAppImage2022-10-18at7_30_38PM.thumb.jpeg.f70cb6ec55b2eb0777142af074a35fda.jpeg 

 

some Grey Putti to shape the edges 🧱

1681736414_WhatsAppImage2022-10-18at7_30_39PM.thumb.jpeg.f223c8587ae2f6048d9af2e2365ec54c.jpeg

 

meanwhile till the putty dries we can focus on the upper structure .

103424012_WhatsAppImage2022-10-18at7_30.39PM(1).thumb.jpeg.754c6750449007a19ca6094f09fb20c6.jpeg381621788_WhatsAppImage2022-10-18at7_30_40PM.thumb.jpeg.ec1f2b35622631b832020595a17c4fea.jpeg

some more support :D 😄

image.thumb.jpeg.b6839bc4424a998b78b63819c893ffc4.jpeg

putty is dried for the bottom part. 


sanding in progress. 🗯️
22970238_WhatsAppImage2022-10-18at7_30.42PM(1).thumb.jpeg.ac207fa0256dfc2046c683e26ee171bc.jpeg1717911854_WhatsAppImage2022-10-18at7_30_42PM.thumb.jpeg.2ccc932e01f3b8a15270ce7945955472.jpeg

 

same treatment to the upper part as well. 

874322781_WhatsAppImage2022-10-18at7_30.42PM(2).thumb.jpeg.9ccad03bd8daafe452fd82639c7b125c.jpeg

coming out nice. :D

Link to comment
Share on other sites

  • 2 weeks later...

Now comes the part where i cover the base with aluminium sheet with 2 MM thickness 

With hand bending the sharp bends will be little hard but we can try with more force.

First measurements with 1MM aluminium strip.

IMG-20221029-WA0032.thumb.jpg.fba6164139f77bfcea463665f4e88359.jpg

looks like perfect fit. Now lets gets to the final 2MM strip. 

IMG-20221015-WA0012.thumb.jpg.b67b295602bcaadf1f97c3fde1ae0dae.jpg

Bending with aluminium sheet.

IMG-20221029-WA0029.thumb.jpg.f46ab50d227ef2e86494eab92b339f3c.jpgIMG-20221029-WA0030.thumb.jpg.1f17152f9f04a1a753c876cb4866429a.jpgIMG-20221029-WA0031.thumb.jpg.ebe94b037f00ab0f59e0a35915a56faf.jpgIMG-20221029-WA0033.thumb.jpg.b7ed6aa15a3b11bb95b5e3c3d0812948.jpg final step is to get some screws for temporary fitting , i will fit rivets in the final step 

 

IMG-20221018-WA0027.jpg

IMG-20221029-WA0030(1).jpg

IMG-20221018-WA0028.jpg

Link to comment
Share on other sites

  • 2 weeks later...

Now with Temporary screws i have completed the top shrouds and side Panels (where the rads will be ) 

1MM aluminium for the shorud and 2mm aluminium for the side panels IMG-20221110-WA0047.thumb.jpg.5b49f92d0884bda23d2ee31364ab9514.jpg

IMG-20221110-WA0045.thumb.jpg.90348b94c678ec92bc09b2ea84d21c7b.jpg

 

The top panel i will be dividing in two parts , one will be transparent and another will be the same default mesh.

 

IMG-20221110-WA0046.thumb.jpg.64cc1fc6097607fa2d41a5e805f2dcb0.jpg

IMG-20221110-WA0051.thumb.jpg.6ea5a10768ee776242ff42c14e90d19b.jpgcuts and marking on both sides for Rad openings.

IMG-20221110-WA0048.thumb.jpg.85f82563032df29b6bf0591f468e3e05.jpgIMG-20221110-WA0060.thumb.jpg.1b2a73b299212029c5529d0b0833d66e.jpgIMG-20221110-WA0062.thumb.jpg.f1602f0d6ce40bfd679ff6d4923cfc13.jpgIMG-20221110-WA0063.thumb.jpg.0de35b701eedbaabe158541b8cb0f056.jpg

For the opening mechanism ibwill be using two 4.5Kg stepper motors which will be then controlled by arduino .

For the stepper motor brackets.IMG-20221110-WA0050.thumb.jpg.b1f743302a52dbde9d0b4f83d3b89b12.jpgIMG-20221110-WA0054.thumb.jpg.c1a4a8b6d9b2374b1d3b8eb18f40c2ef.jpgIMG-20221030-WA0009.thumb.jpg.c75bf89e91f6251c69069c1337ae3726.jpg

now with motor in place amd matkings done , let me test fit the fans and 360mm radiator 

 

(Rad link ) 

 

IMG-20221110-WA0065.thumb.jpg.5bafc404b00024b1b31ddeab3bb50f6e.jpgIMG-20221101-WA0020.thumb.jpg.b30582c482c136dd5c9541e2ae405aa9.jpg

 

Removing everything and getting started with Grey putti again to smooth out the joints on the panels.

 

IMG-20221110-WA0067.thumb.jpg.98e0733c5132b75bbc9a20598e5622c9.jpg

Removing excess putty when its slightly firm.

 

IMG-20221110-WA0069.thumb.jpg.8fecb30c9bfed20cc20cf9b4d5265ae1.jpg

 

Sanding it down for smoother finish

 

IMG-20221110-WA0066.thumb.jpg.af8fdad7d96667673a46c002f211ef16.jpgIMG-20221101-WA0010.thumb.jpg.e803115c2fea0292c21fcc95c3e86532.jpg

 

Dry sanding is more or less completed , getting started with wet sanding now.

IMG-20221101-WA0015.thumb.jpg.8edf3faff1ace20d873ba4a33051d510.jpg

 

with dry sanding , wet sanding, rad fittings in place , mod has started to take shape.

 

IMG-20221110-WA0071.thumb.jpg.c255879c5b2381941347b2cd8045e5a6.jpg

 

Also reused the bottom stands of the chassis and refitted them according to shape, much stable now.

 

 

IMG-20221110-WA0049.jpg

IMG-20221110-WA0055.jpg

IMG-20221110-WA0058.jpg

IMG-20221110-WA0056.jpg

IMG-20221110-WA0057.jpg

IMG-20221110-WA0059.jpg

IMG-20221110-WA0064.jpg

IMG-20221110-WA0068.jpg

Link to comment
Share on other sites

Sliced the trop panel into half will be making the front part transparent , will do the detailing ion the back part after the paint. 

1981819087_WhatsAppImage2022-11-13at11_16.03PM(1).thumb.jpeg.97a306f6264986a3a758930e9b44972d.jpeg

Now adding the Transparent acrylic in the front . 
1435810737_WhatsAppImage2022-11-13at11_16.04PM(1).thumb.jpeg.128f7bc544350d95d478e764590a2db7.jpeg

pasting it with epoxy resin and some putty to smooth the surface , 
1435843276_WhatsAppImage2022-11-13at11_16.07PM(1).thumb.jpeg.df4b90bf4a1e51dceeaa2c013dfb9dbd.jpeg

sanding time again , after smoothing out the putty looks way better and uniform 
1416503630_WhatsAppImage2022-11-13at11_16_08PM.thumb.jpeg.79ee0380b0e48d9cfc1eb78f90da3eeb.jpeg

making holes for the Fan Cables. 

444546861_WhatsAppImage2022-11-13at11_16.05PM(1).thumb.jpeg.06275c08c79828ce02c1e8b8ed230bd0.jpeg

Smoothing out the whole chassis again before doing the paint job, and its ready for painting , 
2045838255_WhatsAppImage2022-11-13at11_16.08PM(1).thumb.jpeg.74091959a8e634b4af7234a13f6bb17b.jpeg60498081_WhatsAppImage2022-11-13at11_16.08PM(2).thumb.jpeg.dbfe5c5d10ee9263f8c80c8471ac03db.jpeg


Primer coat first , to get the unevenness out, looks good , came out as expected. 


836021107_WhatsAppImage2022-11-13at11_16_12PM.thumb.jpeg.e309ff4914b596449b8c822737847111.jpeg


using spray gun and 2K paint , sliver is my color of choice for the build,  

image.thumb.jpeg.4b685f86f7625f7e7e5790cb8fbc5601.jpeg

 

 

 

 

 

 

 

 

 

Link to comment
Share on other sites

removing micro overspray's and droplets with water paper 1000 grit.
2122843407_WhatsAppImage2022-11-13at11_36.41PM(1).thumb.jpeg.abcdb2169dcf2d32f2e3ab88c3d82f83.jpeg

now time for some rubbing compound and finish paste to rub out the fine imperfections. 
143618743_WhatsAppImage2022-11-13at11_36_40PM.thumb.jpeg.89930e555f3f91f04d271b03ee7dcb75.jpeg

 

2104952661_WhatsAppImage2022-11-13at11_36.42PM(1).thumb.jpeg.908216b691940ae77bc1a0bc73e50853.jpeg


2139716494_WhatsAppImage2022-11-13at11_36_44PM.thumb.jpeg.f174671945228b9bc215b4f705b67fa1.jpeg1740195304_WhatsAppImage2022-11-13at11_36.44PM(1).thumb.jpeg.200943691eb76c1ce988a8c12fad9225.jpeg111569370_WhatsAppImage2022-11-13at11_36_45PM.thumb.jpeg.34dda1de3498bd4f1e9f0083b714f974.jpeg1729184809_WhatsAppImage2022-11-13at11_36.45PM(1).thumb.jpeg.1a0d0239e7cf0885e143fdbbc548889d.jpeg1966400990_WhatsAppImage2022-11-13at11_36.43PM(1).thumb.jpeg.728f07d816a835529265c2ebaf4a4f06.jpeg

top is also finished with a Matt Black Border , will be detailed later. 
715610624_WhatsAppImage2022-11-13at11_36_46PM.thumb.jpeg.97aa37abf80fa56c23fb235c03577fb6.jpeg

Looks good for the base , now it will be enclosed in 2MM aluminum sheets for the top and side .

 now use of some vectors to order laser cuts of the design . 

767808252_WhatsAppImage2022-11-13at11_36_43PM.thumb.jpeg.031d0240d79c23a10a5f4e4b5ed511f1.jpeg

 

Link to comment
Share on other sites

i will be using Arduino Uno 3 and proximity sensor to Open the acrylic panels on the front. 


874107176_WhatsAppImage2022-11-13at11_49_57PM.thumb.jpeg.d3bcf99d377e7417e1d0a474027ceccf.jpeg1091871864_WhatsAppImage2022-11-13at11_49_58PM.thumb.jpeg.d40e528da982ead2e366f47a11339e4b.jpeg

stepper motor needs a driver to set position and speed of the steps. testing things out with breadboard,

1901001883_WhatsAppImage2022-11-13at11_49_59PM.thumb.jpeg.ea31fdfde5d2ea249f5156cdf059ccb6.jpeg1046674736_WhatsAppImage2022-11-13at11_49.58PM(2).thumb.jpeg.8e29ebf300c27454ea394ab0696decac.jpeg1251194190_WhatsAppImage2022-11-13at11_49.58PM(1).thumb.jpeg.4eb1fad71f4f5ea539aea181e6bb0f49.jpeg1902123081_WhatsAppImage2022-11-13at11_50.00PM(1).thumb.jpeg.6475184b62dff4af249767ca51f89608.jpeg  1163692784_WhatsAppImage2022-11-13at11_50_04PM.thumb.jpeg.5c00b157128ed30c9373e8a9dfc93c55.jpeg979708384_WhatsAppImage2022-11-13at11_50_00PM.thumb.jpeg.d720715bddf1b4f5e650748ca57e113c.jpeg

This will need some trial and error. 

meanwhile i will assemble the machine and finish the CPU loop. 

1100810729_WhatsAppImage2022-11-13at11_49.59PM(1).thumb.jpeg.6566ce0e55e7f9679cc0837d92bd79e3.jpeg

1615204134_WhatsAppImage2022-11-13at11_50.01PM(1).thumb.jpeg.b71513a2806ae44ae53a34ad024596dd.jpeg948204906_WhatsAppImage2022-11-13at11_50.01PM(2).thumb.jpeg.df91ac29847b2908ea60e041d1265547.jpeg

1191443858_WhatsAppImage2022-11-13at11_50_02PM.thumb.jpeg.7e89c594538968dc59aa93bb17a5fff2.jpeg916024546_WhatsAppImage2022-11-13at11_50_01PM.thumb.jpeg.cffaefd8fff99a423e074e4f2fd267f3.jpeg

 

Aluminum panels are here as well test fitting with normal screws . 

 

228776598_WhatsAppImage2022-11-13at11_50_03PM.thumb.jpeg.e6aa1a9eeec014aa09e5ec877acdd898.jpeg1992067464_WhatsAppImage2022-11-13at11_50.03PM(1).thumb.jpeg.69921260eb8b062c2efcb0a44e72bac6.jpeg


loop is complete, will start with test fitting of the Arduino first for the trial run. 
844874320_WhatsAppImage2022-11-13at11_50_05PM.thumb.jpeg.74ef8b14ac9c251d011fdb7bf7ee179b.jpeg23578257_WhatsAppImage2022-11-13at11_50.05PM(1).thumb.jpeg.e0949dd1c0fe49bfe77600df8df4eccf.jpeg

its working as expected , time for the acrylic panels . measuring out with the spare aluminum strip i had left . 798150968_WhatsAppImage2022-11-13at11_50.05PM(2).thumb.jpeg.7c6b5b9fe3fd7fef345b96ef9434d584.jpeg1638327053_WhatsAppImage2022-11-13at11_50_06PM.thumb.jpeg.56ea4f37db374e3b2f3008fded415bea.jpeg

and the panels will be sent for laser cut. until i get the panels i will finish out the loop and installation in the build. 

922412786_WhatsAppImage2022-11-13at11_50_07PM.thumb.jpeg.54df1f9e05f7f3cd8e3e81523e72f5c7.jpeg 

tested with distilled water. 
and the leak test with liquid is done. 

assembling the rest of the machine. 
361544846_WhatsAppImage2022-11-13at11_50.06PM(2).thumb.jpeg.192be526ff92a65a6f1fdf8d9c5252ac.jpeg1992686547_WhatsAppImage2022-11-13at11_50.06PM(1).thumb.jpeg.33f8fbc65c513968f64e00aec7cd447d.jpeg

machine is assembled now its time for the coolant , 


925578047_WhatsAppImage2022-11-14at12_08_26AM.thumb.jpeg.06d5deb26b09120186b9f20ce914ade1.jpeg

877363349_WhatsAppImage2022-11-14at12_08_27AM.thumb.jpeg.04b12328913f5b9eb24ef26c6af8792a.jpeg2055892673_WhatsAppImage2022-11-14at12_08_28AM.thumb.jpeg.3accd0ad2402ae68546eb1aa2620ea08.jpeg1000870586_WhatsAppImage2022-11-14at12_08.28AM(1).thumb.jpeg.80d865f00fd724c93cc0d6bc0ab5f7e7.jpeg


after some TT RGB magic . 


898407093_WhatsAppImage2022-11-14at12_08_29AM.thumb.jpeg.0007c1d49a3e664a647fcd66cad28b1d.jpeg


Acrylic panels are here as well . 
237158532_WhatsAppImage2022-11-13at11_50.07PM(1).thumb.jpeg.b61af2e3ff0e243cba0d51769a7b54be.jpeg

1599644683_WhatsAppImage2022-11-13at11_50.07PM(2).thumb.jpeg.4c745dde02ff7a61546b719e63bf3cdb.jpeg

Bottom Half Done ! 
acrylic still has the protection film on , that's why it looks milky. 
 

 

 

 

Link to comment
Share on other sites

changed the temporary screws used to Allen screws. to get a more plush look.
 

image.thumb.jpeg.b028840bac51a5b3ee9729c755fcf607.jpeg

since the test fit was working with motors and Arduino, got this Prototype sheet to fit on Arduino to make it compact . 
2028382212_WhatsAppImage2022-11-14at3_27.28PM(1).thumb.jpeg.999ab85a7b3ae629f53a66877638e608.jpeg

2112005064_WhatsAppImage2022-11-14at3_27_29PM.thumb.jpeg.940af87a4ea4f79da6ee403da23164e5.jpeg
741563613_WhatsAppImage2022-11-14at3_27.29PM(2).thumb.jpeg.f1beef3cfe0cc0103485f42d1870dbe2.jpeg

will be uploading the project files on the website incase someone needs it. This Arduino will be controllable from the machine itself .


Now the upper panels are in place, 
will carry out some testing with the increased load of the acrylic panels. 
test of temperatures and will play with Neon, maker for best looking RGB colors .  
will be seeing you all with the final post after this ! 
thank you for following this thread and stay tuned for the final pics !! 
1059311065_WhatsAppImage2022-11-14at3_17.33PM(1).thumb.jpeg.a08fce00d98ac0bf979e95a03c06d27c.jpeg1532547477_WhatsAppImage2022-11-14at3_17_33PM.thumb.jpeg.eb9965841517cfd469009ad19a88c2aa.jpeg1415155750_WhatsAppImage2022-11-14at3_17.33PM(2).thumb.jpeg.deb8d282801012dc289e779317e5a6b7.jpeg


will do some dusting and polish to make it ready for the final shoot ! 


image.thumb.jpeg.5298c8186c40e702b4aa216d9e779e99.jpeg
----------------------------------------------------------------------Project YANTRA-------------------------------------------------------------- 
:D:D:D:D:D


Stay Tuned for final pics !

Link to comment
Share on other sites

---------------------------FINAL UPDATE  AND MOD PICS ----------------------------------------------
 

YANTRA.thumb.jpg.c279cefbd934896ca71ed254d8d7588b.jpg

DSC07454.thumb.jpg.93d347c1107cb3b8ec0e95e4980a7ca7.jpg


DSC07472.thumb.jpg.b7f7301ba4262f49f0840672d5c40b19.jpg

DSC07456.thumb.jpg.cc33c3fbf15bc8cd4cf5f5a1420a4c91.jpg

image.thumb.jpeg.5ec25aa42e40669309185fbe636319ac.jpeg

DSC07466.thumb.jpg.33d8906f11e05a056b99d38568b29786.jpg

DSC07475.thumb.jpg.bb576d71812cd5a745056c65cd704425.jpg

DSC07483.thumb.jpg.91b9b5e828a29b77032b121c3e55daf8.jpg

 

DSC07479.thumb.jpg.228dd03b82e568165b111b852c3d58fb.jpg

 

 

 

WHEN TURNED OFF : 

DSC07494.thumb.jpg.bf5be16e118b5966086222a886858f8f.jpg

DSC07496.thumb.jpg.bbb61572a6fc5f091156d77af19e3322.jpg

DSC07495.thumb.jpg.9029d431f5fdbc4f473bdc23317da5b1.jpg

 

 

 

-----------------------------------------THANK YOU !! I Hope Everyone likes the build ! and enjoyed the process !-------------------------------------------------------------------- 
---------------------------------------------------------------------------------😄😄😄--------------------------------------------------------------------------------------------------

 

Link to comment
Share on other sites

Here is the Video!! cheers !  

https://youtu.be/NQ84J45qJ3U

<iframe width="560" height="315" src="https://www.youtube.com/embed/NQ84J45qJ3U" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>


https://youtu.be/NQ84J45qJ3U

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...