Jump to content
Vitali Fridman

Synchronising two controllers of Ring RGB fans

Recommended Posts

Hello,

 

I have two 480 radiators in my cooling loops. I installed Ring RGB fans in all 8 positions. It required 2 packs of 3 and 2 individual fans, There are toal of 4 fan controllers involved (they control color of lighting). Each controller is capable of controlling up to 3 fans. There is also unused connector on the controller. Is there a way to color-synchronize several controllers (may be at least two)? Maybe unused connector have a special cable that I can use to interconnect controllers?

 

Thanks for you help,

Vitali Fridman

Share this post


Link to post
Share on other sites

Hi Vitali

 

Thank you for supporting our products.

 

We are currently working on the cable which allows you to sync all controllers, please leave us your contact information, we can send you one cable once we finish the testing.

 

Hi, I need to synchronize two controllers too, I am interested by this cable :D

Let me know where I can find one?

 

This is my build you can check it out :D

http://pcpartpicker.com/b/QjFdnQ

Share this post


Link to post
Share on other sites

I recently purchased 2 thermaltake rgb 3 fan kits. Love the fans by the way. Great job thermaltake! I just wish I could connect the 2 control boxes together so I could mount just one control box outside of my case and still control all 6 fans. If you could let me know when the cables become available I would really appreciate it! 

Share this post


Link to post
Share on other sites

Hi

 

I currently have 4 controllers in my X9 build with another 2 on the way totalling 16 RGB Riing Fans. Could i get a few of these cables to? Also when will we be able to control the colour from software?

 

Cheers 

 

Blak

Share this post


Link to post
Share on other sites

Hi Blaknight

 

Do you mind me asking if the controllers are inside or outside the case? (sent you a pm as well).

 

Thanks

 

Paul

Ill post my PM response here incase others want to know.

 

"At the moment i have 2 controllers on the outside (attached by double sided tape) on the back where the rubber grommets are and 2 inside the case. Im planning on running all my controllers on the outside so i have the ability to be able to control them just waiting on extension cables. Once TT release the control software (man i hope they do) all the controllers will be inside out of site."

 

Cheers

 

Blak.

Share this post


Link to post
Share on other sites

I have 12 Riing fans in my new build, three 140mm and nine 120mm. Would it be possible to get the cords needed to sync / daisy chain them?

I would love to just have one controller on the outside of the case that could control all 12 fans.

Share this post


Link to post
Share on other sites

About to be in the same boat, I have seen the cable on the main USA site but no price and no link to buy. I looked on the premium site but it is not listed there either but they do ship to the UK . Would be great if one could be sourced from at least Germany.

Share this post


Link to post
Share on other sites

Guess what, I am also building an X9 setup with the 120mm RGB fans and would also like to know when the new cable becomes available. Being in the UK I am unsure if I need to be going through a authorise seller or direct to TT. The intention currently is to have a four rad two loop solution. Any advice would be most appreciated. 

 

If that fails I will likely go the 140mm route and just get some new rads

Share this post


Link to post
Share on other sites

Good afternoon Tt Alvin.

 

I recently purchased the core x71 case and am planning to run duel loops I was interested in this post because with the 3 rads i plan to run (360x2 480x1) i have purchased 3 packs of the riing rgb and have 3 more on the way.... that is 6 controllers (holy hannah lol) as well as the commande f6 fan controller which I now realise is useless if I want to be able to control the colors and speeds of the fans.

 

I noticed you mentioned there was cables avaliable to connect multiple controllers.

 

Is it possible to also obtain a few of those, as it would greatly help with some management issues in my build.

 

Thank you for your consideration.

 

~Athalagos

Share this post


Link to post
Share on other sites

I have two monster computers with two  wall mounted radiators each. One holds 9 120mm Riing Fans (3 sets of 3) and the other holds 4 sets of 140mm Riing fans and I have two 140mm Chassis fans.  Thats a total of 15 fans for each computer.  It is basicallly a thermaltake billboard with all theses Riing Fans.  Unfortunately, I bought these thinking that they could synchronize the colors, but apparently there is only a beta cable to link the controllers available?  Could you please send me the 10 beta cables necessary to link the controllers? I will only be syncing the 15 fans per computer and not across the two computers.

 

Thank you kindly for this crucial cable, without out it the lights go out of sync and carry different colors.  The radiators look like a crazy disco and not the color theme I had purchased them for.

 

Best,

Gil 

Share this post


Link to post
Share on other sites

I'm in the same boat. I got a x3 pack of the RIING 140mm and a x3 pack of the RIING Premium. Going into a WP200, so will have x5 total. I though the "Premium" was the controller included, but it seems two different style fans, very confusing on ordering. I need to get the these to sync, they are two different connectors. 

 

 

On another note: I have a 2nd W200 chassis for a client build I'm working on, and I also need extra filters, drive bay brackets. Have had an e-mail to support for awhile now, but no response. 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...