Jump to content
yony_palacios

Help!!!

Recommended Posts

Hey everyone, I am new to the pc ecosystem and unfortunately I need help. 

Specs: 

Intel core i7 7700k, Asus ROG Maximus Ix Formula, EGVA 1080 ti FTW3, corsair vengeance LPX 3000, Thermaltake Floe Riing 360 TT Premium, and Silverstone Technology PM01W-RGB chassis.

My issue is, I can not get the RGB to work on the AIO cooler, I have everything plugged in, all drivers installed, yet nothing. 

Please help!! 

Share this post


Link to post
Share on other sites

Yony...i know it is late, but that is your problem If you connect the water block usb 2 type to MOBO, it blows the RGB... So you probably connected to Mobo first, then after to a controller, so you basically killed it.

 

The problem is that TT did put a USB 2 type on all fan headers just like water block on the Floe 360, so given the fact that the pin-out of USB 2 on the MoBo is different that fan header with a USB 2 type connector, but with a different pin-out, then it blows the RGB on water block. 

 

This is a huge flaw of the Floe 360 desiggn as I mention on my install tutorial on my youtube channel "cac2244".

Share this post


Link to post
Share on other sites
2 hours ago, cac2244 said:

Yony...i know it is late, but that is your problem If you connect the water block usb 2 type to MOBO, it blows the RGB... So you probably connected to Mobo first, then after to a controller, so you basically killed it.

 

The problem is that TT did put a USB 2 type on all fan headers just like water block on the Floe 360, so given the fact that the pin-out of USB 2 on the MoBo is different that fan header with a USB 2 type connector, but with a different pin-out, then it blows the RGB on water block. 

 

This is a huge flaw of the Floe 360 desiggn as I mention on my install tutorial on my youtube channel "cac2244".

What I meant to say is I connected the water block to the hub as I was instructed by instructions, yet I do not know where I should connect the cable that has two USB 2.0 heads

Share this post


Link to post
Share on other sites
33 minutes ago, yony_palacios said:

What I meant to say is I connected the water block to the hub as I was instructed by instructions, yet I do not know where I should connect the cable that has two USB 2.0 heads

Hi guys, I was able to get it to light up!!!!! All I had to do was change the Molex cables. I plugged them incorrectly lol thank you for everything!!!!! 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...