Jump to content

Admodz

Recommended Posts

Hi all.
now that I've found my feet with my new job, it was time to start with some massive re-fresh build projects.
This one is for Scan Computers Ltd show room, this will also be doing the rounds at events next year.
This wall pc was originally made back in 2015 for Computex.
I was asked by HQ if I would like to give this a re-fresh and a new look, so being me I jumped straight in with a plan and a 4 day schedule.
 
Sponsors:- #hyperx #msigaming #thermaltakeuk #scancomputers
 
Component specs:-
Mobo:- Msi Z370 Godlike
CPU:- Intel 8700k
MEM:- 32 GIG Kingston Hyper x DDR4
GPU:- 2 x MSI GeForce GTX 1080 Ti GAMING X
SSD:- 2 X 480 GB Kingston Hyper x Savage
M.2 NVME:- 480 GB Kingston Hyper x Predator
PSU:- Thermaltake Toughpower iRGB PLUS 1250W Titanium
Cables:- To The Wire Custom Sleeving.
 
Watercooling Components:-
RADS:- 1 x Thermaltake  Pacific RL360
              1 x Thermaltake Pacific RL480
CPU Block:- Thermaltake  Pacific W4 Plus
GPU Blocks:-Thermaltake Pacific V-GTX 1080Ti Plus Transparent
Fans:-Thermaltake Riing Plus 14 LED RGB Radiator Fans / Thermaltake Riing Plus 12 LED RGB Radiator Fan.
Tubing:- Thermaltake 16/12 V-Tubler PETG
Fittings:-Thermaltake Pacific range
res / res pump combo p:pacific R22 / Pacific PR22-D5 w/ Silent Kit
Flow Meters:p pacific Flow Indicator One
 
 
Day 1:-
with all of my kit loaded, it was time to travel up the M6 to Scan HQ, they had a build area set aside for me, the mammoth task was about to begin.
so after a struggle and 4 men carrying this monster, we goy it set in its build area, and it was time for me to tear this down.
 
EB7_B337_B-_AF81-488_D-9_B5_A-48_DC66420
 
5_AC96_BE9-_AFBF-46_BB-_BE7_D-4_A38262_F
 
Day 2:-
Now that I had a blank canvas, it was time to get the mounting panel holes drilled and tapped for the new components. And new holes for the cable routing. My plan is to only have the sleeved cables on display.
Now after many hours of drilling, tapping, filing, it was time to mount some components and start on the mammoth cabling exercise.
 
9_C1_A63_D8-_EE3_C-4122-82_DA-063_DC6_B7
72_BA532_B-125_B-4_C0_C-_AA05-99361018_B
9_D2_CF10_B-4164-4_CE3-9_E49-25_CB5_B4_C
26_A03482-711_F-41_D4-_A8_DC-3_A8_E47510
F34_D5891-_F1_EF-40_F5-_B682-17_C36_A8_C
ED97_B57_C-2_D49-4_DEC-8_D54-_CD4_CC07_D
3_EFA7_DDB-15_D0-49_A3-88_A0-2_FB4_A2445
F861_C48_A-66_CF-4_FCD-_A8_A1-9_CAA26147
 
Day 3:-
well after a long day 2 (13 hours),it was time to get the raised panels mounted to the frame. This point was critical, and I wanted the raised panels to be spaced nicely apart. And bring them more in line than they were before. Not much of an adjustment, but just enough to step back and say that's better.
 
A909_B0_A3-49_AF-4769-_B8_C6-_CFA40_BBCF
4_C1_EE05_F-484_F-442_F-8_D08-7_A0_E7499
CCF17_FA8-_BC37-49_E5-85_E5-_D0_CE1_E427
 
whilst I was waiting for the paint to dry on the gpu/pump panel. I got on with tubing the cpu loop up.
 
BA05_E56_E-2_C9_B-4_DB1-8_BA7-62_EA3_CC3
E2_D31024-_D736-40_F7-_A6_E2-85_AE136_E4
 
And a little bit of gpu block mounting time.....
 
19652073-20_FC-4_D2_A-87_BB-8824_AF57469
F28_CBC01-747_C-4708-_B9_CA-_C8_CF2_D5_F
9_DD73109-_F8_B9-47_D4-_A076-87067_AEE36
3_C7_C6_E7_A-_A119-4_C1_B-803_B-8_E60_E1
 
Now we are getting late into the night now,and finally the gpu/pump panel was dry enough to mount to the main chassis.
getting this done now will let me finish off the gpu loop tomorrow and get leak testing.
 
D3_F4_D034-6456-4429-_A4_A1-0624_E48_A04
F84_E8105-_E8_A8-4139-9161-_A6_FE34569_D
 
now its time for food and beer.
 
Day 4 ( the final run) :-
With a early start under my belt, it was time to get the gpu loop finished and get this monster leak tested.
 
3_A0_BDC52-_DBEA-47_DF-9_D5_F-_E6_CB29_E
361_BAD9_D-5_B94-4025-_BBC6-2_B6646_FCFB
3_DE5667_B-_CFEE-474_D-_AA8_B-_F1029628_
065_D5_F93-95_EC-4_E69-_A218-9644943_BB7
 
leak testing for 4 hours,( I would of liked longer) not a drop leaking anywhere.
it was time to get the final loop coloured fluids in, and get windows installed and ready for the showroom.
 
BC60_C9_EE-954_D-4_D87-872_A-0_C6_E83028
CBDF654_C-7_AD9-4_FEB-9050-180_F9837_F89
A036_CB4_B-0545-4_B46-_B6_EB-8_C7_EA6_B7
09_CA1_B51-217_E-4888-86_AE-_D2_CAA60_C5
ADBAC160-83_B5-4507-92_A2-0501286_D5359.
 
Well that's completed,now to pack all my kit up and travel up north for the next build.Thats a 1 day build for our weekend event coming up.
 
a full video will be done by Scan computers and the process I went through.
I hope you all like,and ill see you all soon.
 
a massive thank you to:-
#msigaming #hyperx #scancomputers
 
Adam
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...