Ragn0r Posted October 28, 2017 Report Share Posted October 28, 2017 So I have this Rog Zenith Extreme motherboard and in order to mount it I had to modify the grommets at the bottom of the mounting panel so that The motherboard would not be distorted because of the thickness of the grommets. This information is Just so you know before you get to that point. I shaved off the grommet to fit the installation. Quote Link to comment Share on other sites More sharing options...
ThermalMike Posted October 28, 2017 Report Share Posted October 28, 2017 Hi, Thanks for letting us know your feedback, can you help with some pictures and the model of the motherboard you have exactly? This one has the backplate on it correct? Right at the bottom since the MB is turned in the case? The MB tray and bottom tray are flush against the case correct not like offset or something? I built a threadripper system a while back using asus zenith extreme and did not have this issue: Give us some details and we can take a look. Quote Link to comment Share on other sites More sharing options...
Ragn0r Posted October 31, 2017 Author Report Share Posted October 31, 2017 Thank you for the feedback. The mobo I'm using is the ROG ZENITH EXTREME with the Threadripper 1950x, 64gb Balistix Elite RAM, Samsung 960 EVO 1TB, GPU is the GIGABYTE AORUS Xtreme GeForce GTX 1080 Ti Waterforce WB 11GD, GV-N108TAORUSX WB-11GD (from NewEgg $859 which included Destiny 2 with a $59 discount for a total of $800) Trying to figure out how the set up monitoring of the two separate custom water loops. Quote Link to comment Share on other sites More sharing options...
mini89 Posted March 1, 2020 Report Share Posted March 1, 2020 good post aboutallpet Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.