Shinobi84 Posted January 30, 2018 Report Share Posted January 30, 2018 Hi Guys, ive buyed this one for my custom loop...bute ive an issue...its sound rattle!It made a rattling sound when spinning... Any suggestion? Quote Link to comment Share on other sites More sharing options...
ThermalMike Posted January 31, 2018 Report Share Posted January 31, 2018 Hi, Make sure the tubes are pressed in all the way on the fittings. Did you by any chance take out the color insert rings that go on both ends? They have to be there for it to spin. Depending on your tube work, if the flow2 is being pushed or "tweaked" and not "straight" just try to shift it around a little bit and it should be fine. Also check to see if there is anything that is trapped in there or loose. You might want to partial drain the system, take it out and give it a look to be sure. Keep us posted, I have personally used this product a lot on builds, i have not had many issues. Quote Link to comment Share on other sites More sharing options...
Tiger-0123 Posted June 11, 2018 Report Share Posted June 11, 2018 Hello, I recently put this into my custom loop but it wont spin(with d5 pump at max) if I tap it it slowly spins then stop and repeates for about a minute before coming to a complete stop again, Why is it doing this? Thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.