Jump to content

[UK] Rob De Luce


Recommended Posts

  • 1 month later...

1265423603_PantherbuildLogoMain.thumb.jpg.d2e9b2163c5f166c00c8aa40fffecb5b.jpg


Hi everyone.
I'm Rob deluce AKA Megadeblow,


Very happy to be representing the UK in the TT CaseMod season 1.

For my mod I will be doing a clean as possible black panther build using methods I have used in the past and something a bit new.
I have a vision in my head as with most the past builds I've done, but i really need to see the case and play with it a bit before I can really see what I want
to try accomplish with the mod.

So today I have started to plan out what I want to do within the case and around it, for the front and top I had already decided what I wanted and started working on
getting the tools I would need to make it happen.
I'm going to be using clay, vinyl, paints, lighting, Plexiglas, 3D prints and reusing most of the case parts and keeping the main selling point of the case for me, the glass. 

Some of my parts arrive the other day so I will be starting to strip the case first and try put a plan in action for the stages that will need starting first, like the clay work
I've already started working on as it will need to be 100% dry before I can paint.

Good luck to all the other modders, hope we all have fun during the next month or so :)


You can follow me on the pages below for other updates and news.

https://www.instagram.com/megadeblow/
https://www.facebook.com/megadeblow/
https://www.youtube.com/megadeblow

 

Here's some of the parts I will be using, full specs to be added once confirmed.

 

Specs Update 08/16

CPU  - AMD ryzen 2700
HD    - Plextor M9Pe NVMe SSD
RAM - G.Skill Trident Z RGB 16GB DDR4
MB   - ASUS ROG CROSSHAIR VII HERO (WI-FI)
GPU - ASUS Republic of Gamers GTX1070


CPU Block - Pacific W4 RGB
GPU Block - Thermaltake Pacific V-GTX 10 Series Transparent (ASUS ROG)
Case          - Thermaltake View 91TG RGB
PSU           - Thermaltake Toughpower iRGB PLUS 850W Platinum
Fans           - Thermaltake Riing plus 
-                 - Thermaltake Riing Trio
RADs         - Thermaltake RL360/
RES          - Thermaltake Pacific T33
Pumps      - Thermaltake Pasific P1
Lighting     - Pacific Rad Plus
-                - Pacific Lumi Plus
Printers     - Box.co D9/CR10s 
Filaments - Steadytech PLA 175

20180628_161050.thumb.jpg.1d68ba7302859be27eaad31fe8bd6836.jpg

 

Thanks to box.co.uk for supporting me with a 3D printer and some materials for the mod and other projects.
 

20180509_184427.thumb.jpg.629b2d1d59728e95f0907feaa17a4c54.jpg

 

UPDATE 11/8

All my Thermaltake parts have now arrived so here's the group.


20180810_001711.thumb.jpg.6812e7d8e3ded931d96c6c25d51de4e9.jpg
 

 


P.S, just seen the pre vote page, thank you everyone that put my name down, I feel 10 times more pressure now lol
I'm late to the party so sorry I cant reply direct.

Link to comment
Share on other sites

The first part I started was the panther, because the case had yet to arrive I simply made a platform out of MDF to mimic the top of the case.
20180421_140451.thumb.jpg.81213017a2ea26632510f22a605539ef.jpg

20180421_141829.thumb.jpg.597d2f75f9129e0c9cd9b6f0d9b3be08.jpg

 

 

Thanks to a friend I use to work with I managed to get some of this nice packing to be a base to build upon with my clay, this is to help make it stronger and also cut

down on the weight of the panther when completed.

20180421_142341.thumb.jpg.66ee13b70e47e2ed30cb964fbcdc3bf7.jpg

 

20180421_160235.thumb.jpg.8b2bbd610626a99d38b2b33dd0b92cc5.jpg

 

20180421_182413.thumb.jpg.a24a0a647d55005edff4978ff4748439.jpg

 

Never used this saw, apart from as a weight lol

20180421_234634.thumb.jpg.53e59f708e1249620a7f8788a22d4e6d.jpg

20180424_220323.thumb.jpg.0e562c7eb941753bf0953ab5ddf7ad83.jpg20180426_164004.thumb.jpg.e50a2d1e9385bbe26a7d31ea8f8bea36.jpg

 

This  stuff is messy!       20180426_164020.thumb.jpg.f47675d400aee1d8a23e07dbfa988549.jpg

 

 

to clean of the edges a bit, i decided to set my heat gun to stun.

20180426_170252.thumb.jpg.baac81b5f7bd0701a070b1e4de7d1eaa.jpg

 

For the tail im using some old metal from what was a drink holder.
my wife says i keep too much random junk around the house, but this is the reason why, never know when it could come in handy :)

 

220180421_142629.thumb.jpg.0e0e785b37c7666817fade938a6e71da.jpg

2330180426_175528.thumb.jpg.3f92d0a5a40942b3352693d48f000c90.jpg2330180426_180645.thumb.jpg.127cb361eefa23a87f9c0e8fc1ca13a9.jpg

 

Taking shape, now it looks more like the alien from Alien 3 lol

2330180426_180859.thumb.jpg.197af38ff8a20964471f78c9ea51630d.jpg

Link to comment
Share on other sites

For the eyes im going with RGB, why not :D
although I will have the full range if colours to pick from when completed, I will be using white or purple most likely.20180428_154643.thumb.jpg.1f1ae91ea3d8ebb3b18df32d7dfa9076.jpg

20180428_155523.thumb.jpg.4508571d1a45f8d55be318918ecf175a.jpg

20180428_162302.thumb.jpg.d5740a3252eac86223a64b1dd7b9dfcc.jpg

 

 

 

had to redo the face after adding the lighting, but one thing was still missing, needed to cover the leds with something that would hide the led its self but allow some light.

so after a look around the kitchen, i decided to cut up my wife's cooking oil container :)

 

20180428_163501.thumb.jpg.b9ede9cabc5ec215ea3ac50d4cba56ad.jpg

20180428_163737.thumb.jpg.07dd1cbd197bce9f2bbd95e3e219664b.jpg

 

 

had to give them a sanding to reduce the clarity a bit.

20180428_164510.thumb.jpg.202b3be2cccdc5a375a8657e0b2f303b.jpg

20180428_165036.thumb.jpg.b47b1ada26385447ae1ef8501ed3e12a.jpg



That's it for this update, I will add some more soon, I have started to rip the case apart and plan a layout (in my head)
still waiting on some parts that I need before I can fully get to work on the inside, so for now i will be sticking with the clay and other parts that can be done
while I wait.


 

Link to comment
Share on other sites

Bunched a couple of photos together for this post, saved on the bandwidth and should help your scroll wheel last a bit longer :)

Took the case apart, not too hard and I have to say, it's a very very strong frame.
Its massive! easily the biggest case iv'e ever used personally.

mix80603.thumb.jpg.2ac987a9bf2ba682ae7b751dd2a7e3d0.jpg

 

 

20180705_160532.thumb.jpg.2f1712d5152291a675f462a832994466.jpg

 

 

20180705_160611.thumb.jpg.ee7630399c4f659886c854d33a8e3683.jpg

 

 

Now for the panther, several places needed the polystyrene removing as it was poking though the clay, so i did some surgery on mainly the legs and shoulders.

moved on to the face next, adding some detail, the detail will be over the top as when I come to sand and paint the thing some of the detail will be lost im guessing.

some of you will know I love to re-use old things, so I had a old brush, well not that old but it didn't last long before the handle broke.
so i cut some of the bristles of to use as whiskers, wife on hand to capture the moment on film.


mix.thumb.jpg.e5fb627ca9970816fd7351b6f5708992.jpg

 

The teeth was tricky, proper felt like a dentist. the fangs was the hardest to make then stick and hold in place due to the work space around the mouth.  
 

Link to comment
Share on other sites

decided to place one RAD at the back and when the other RAD arrives it will be going at the front.
Removed everything that was just screws in place and cut the other parts as needed, then reused the RAD holders that was originally on the side of the case.

20180705_181552.thumb.jpg.3c0c5271689a32c3cb5a91c90fd5f83e.jpg

20180705_181912.thumb.jpg.2045bb2b414fab038f86dabc6327a768.jpg

 

 

This is going at the back, have a 480 coming for the front of the case.

20180705_182229.thumb.jpg.f8158547ae0d4dd69da6a33c43c40293.jpg

20180705_182356.thumb.jpg.657a4b7afb31640ce7c4b3de54f3916a.jpg

20180705_182535.thumb.jpg.f610bb751476045509ecec628d9d6626.jpg

 

20180705_182627.thumb.jpg.6c7ed54443a45c7550fcda5e4d8b5f7e.jpg

 

20180705_195853.thumb.jpg.c10ea56d011d45cb6d65cf502145b74f.jpg

20180705_183453.thumb.jpg.9b9a62e481550ed4059fc29e43768de4.jpg

20180706_191318.thumb.jpg.e68371a2f3c2ed72c36d90525eb4a449.jpg

Link to comment
Share on other sites

Again like with the RADs, going to be reusing as much of the original case and parts as possible.


I moved the RAD to the back of the case because I want to use the top and bottom for other parts.
The MB will be central, most likely angled but I might change my mind once the components arrive and I get to see them in place,
This is the main reason I wanted to move one of the RADs to the back of the case in place of the original slots used for the PCIE and other ports on the MB.

Wont be needing the full tray so I removed around %30, all guess work atm until the MB arrives.

 

20180705_164317.thumb.jpg.9e249e4ca11666a9640bda3fdc0868b6.jpg

20180705_164429.thumb.jpg.c590596804932e5b276c02b53b872e00.jpg

 

20180705_164531.thumb.jpg.1898cb2f672eac088b90ef34fac30e4a.jpg

20180705_201156.thumb.jpg.ae3c4e51aaf7ae02e63da957fc594a19.jpg

20180705_201418.thumb.jpg.8237e6093ec586af50787d6088f1607a.jpg

20180705_202330.thumb.jpg.b95efce8e3a60f78fa43556da663f1ed.jpg

Link to comment
Share on other sites

It's cracking me up!

It's been very hard keeping the panther from cracking, the weather hasn't helped here in the UK.
I'm almost done filling cracks and replacing damaged parts due to the fast cracking caused by the heat and thin air-dry clay.

I wasn't going to show all the bad parts but its important for people who might want to attempt something with clay to see what can and most likely
will happen.  
air-dry clay shrinks a lot, the speed of the shrink will also effect the amount of cracking, hence the hot weather problem.

Its almost back to how it looked when I first started to let it dry and iv'e now completed the claws, even harder than the teeth and I've broken them plenty of times
the first coat after its %100 dry will be to protect the teeth and claws. 

 

 

 

20180517_122705.thumb.jpg.6fa34c752cb176fd25d4dcff77a88179.jpg20180517_154533.thumb.jpg.efae965f891215bda1e0ead4a2caab89.jpg20180517_171341.thumb.jpg.0e8c321ccec690970bae4da052259d54.jpg20180705_154555.thumb.jpg.1b9f089a9ee04471808c9b665a5fdcee.jpg20180705_154609.thumb.jpg.5c8a0a1441fcfd06a8ec87a08497a7c8.jpg20180705_162935.thumb.jpg.a9c88a07ebf3971805087c3e3ac6b750.jpg

Link to comment
Share on other sites

I know the problem with the clay.
Wanted to make a dragon with it for another project. Absolute disaster. That's why I'm using paper mache again. Easy to apply and does not crack during drying. Also a lot cheaper and won't become so extremely heavy at the end =)
But it looks good so far. I wonder what he looks like at the end.

Link to comment
Share on other sites

On 7/17/2018 at 4:13 PM, Kaleeva said:

I know the problem with the clay.
Wanted to make a dragon with it for another project. Absolute disaster. That's why I'm using paper mache again. Easy to apply and does not crack during drying. Also a lot cheaper and won't become so extremely heavy at the end =)
But it looks good so far. I wonder what he looks like at the end.

Thanks, yeah its a pain and the 2nd thing I've now used this clay for, did a batman head that also cracked badly but not as bad as this one, I think because the clay was put on thinner. 
It's not too heavy because of all the foam I used lol, I would make it thinker if I was to use it again, crazy amount of filling and sanding been done, today I primed it and it will then need another sand, maybe some more filling then I can do the main paint and put him to one side :)
 

Link to comment
Share on other sites

For the front of the case I will be painting the outline of black panther, created a stencil on the PC that I can use to mask the parts I want to leave clear.
The front of the case has been cut on the internal panel so I can fit the RAD central and the external panel holding the glass has also been d to allow space for the panther paintwork.

 

20180706_191716.thumb.jpg.e473949a2d859568097e58752389e33b.jpg20180706_193250.thumb.jpg.f5f0cc6da0064c0cd8d0f43e82c228bb.jpg20180706_193651.thumb.jpg.09147b12107b504953bdaf8024719180.jpg20180501_235722.thumb.jpg.454502ceec8c2fc91484ec9958d23e27.jpg20180502_002747.thumb.jpg.ab0869e640511f8bfd582f7a375ee954.jpg20180706_194902.thumb.jpg.a2f217165296cee29853150dedaead18.jpg20180706_195815.thumb.jpg.f28c7a4162a34dcd2086d97eed8f264e.jpg20180706_200932.thumb.jpg.c0e5de0725248fb983732f41e4db22e5.jpg

Link to comment
Share on other sites

I always try to do something new with every build and this one will be no different, for the first time I'm not only using clay but as I 
don't have room for CNC or laser cutters I went with 3D printing, the 3D printing has taken the majority of my time over the past couple
of months as I try to learn about setting them up, modding and also learning how to use CAD/3D design software. 
I'm no 3D pro but its been one of the best things in years I have found a interest in learning.

Big thank you to https://www.box.co.uk/ who I bought my first printer from who then kindly sent me another to try out along with the Steadytech filament I'm using to
print most of the parts for this build.


 

1621417043_Groupbuilds.thumb.jpg.88356007e2babbd9a7d6c2079e18e26e.jpg

 

The first thing I wanted to do with the printer is make some 3d covers for the pumps, they've been made and designed from scratch 
following African/black panther styles for reference. 

p1.thumb.jpg.368cd90fa4b005bb46fae510164b30c6.jpg

 

p3.thumb.jpg.db1679b2749df8e157989a2d9c751437.jpg

 

Using Photoshop and some other programs I first designed the pattern then went on to make my very first 3D render for printing. 
After the printing is done I move on to sanding, filling gaps and priming the covers.

p5.thumb.jpg.636c7c51dfa9dfb4d5306a020ca16f5e.jpg

 

p7.thumb.jpg.dd0497aad2c61fd5e55d6fa855c196e5.jpg

 

A perfect fit :)

p8.thumb.jpg.53fe1e1c50b8007ec130bb7bcd676311.jpg

 

Forgot to thank Simoniz, (https://www.holtsauto.com/simoniz/) they sent me some paints I've been using for years, mainly to be used on my 3D print model work but always useful to have around for the odd PC mod.

 

p11.thumb.jpg.a373ac39d37398fdf7d6969d9109c78a.jpg

p10.thumb.jpg.0b681cbfcfeeb130c8b048b6f9878ae9.jpg

Link to comment
Share on other sites

Used this pump in a couple of builds now and trust it, so picked the Pacific P1 again.
As above, wont be painting this time, instead covering half with the 3D covers and the other half will be out of sight to help keep wires to a minimum.

20180707_182841.thumb.jpg.cc086943efd9147cdc926b5379c696e2.jpg

 

20180713_204745.thumb.jpg.3471a94b931eedc27055310de5b19906.jpg

 

This is just a template for the main part that will be used.

20180713_210006.thumb.jpg.a8b5e8bfc6462238a31bb901bc099ceb.jpg



Got myself some new airbrush paints via smdesign ,great help and advice given.
the black and chrome will be used on the pumps and a couple more things.

38411764_2109250932480620_4358835654419808256_n.thumb.jpg.cd0c831c20150cecb5b01441de26fc7d.jpg

20180720_134432.thumb.jpg.ae95d4b5104842a2be44f75bab7ec24f.jpg

 

 

 

Link to comment
Share on other sites

  • 2 weeks later...

 

Using the template I made originally to check everything would fit I then went to work cutting some clear Plexiglas that will cover most the wires and house the pumps.

 

20180719_203013.thumb.jpg.abc3e8297bdda0894559b16b6cc36189.jpg



Although I do have a hole cutter, I like to free hand somtimes lol

20180719_204247(0).thumb.jpg.a26afcb884928527b451625d926ed6ad.jpg

 

 

 

This is just a hand full of the designs I have made from scratch for several parts of the case, inside and out.
Some are going to be used for to covers, stencils for paintwork and after some 3D editing I will be using some for 3D prints.

The 3D printing is something I just started to learn for this build, as a bit of a noob its probably taken most of my time but it's a great tool to have
once masted.

1375643636_bandicam2018-07-2117-55-27-304d.thumb.jpg.27c06523c419342d7d70a64e9bfa2b6c.jpg

 

20180721_190135.thumb.jpg.0242a93ac27cfcbdb0d9aef1b1841dcb.jpg

 

20180721_203319.thumb.jpg.75bf7e67aeeea3f8505affad97e890f0.jpg

 

20180721_211225.thumb.jpg.b12909b88b9e5750228eae764373a2c5.jpg

 

20180728_031205.thumb.jpg.0ec5e6423e74fd67d6786e1dc882a731.jpg

Link to comment
Share on other sites

Now all the components have arrived I have added the full specs to the first post.


Looking forward to using my first Ryzen CPU.

ryzen 2700

983901692_ryzen2700.thumb.jpg.cc21f23808b5b92b9a582bf1a3b6e3b5.jpg


The cooler for the CPU, although the fan that comes with the CPU is very nice.

20180810_005614.thumb.jpg.99fe3b3b08f8cfd09d57057ebce96981.jpg



ASUS Republic of Gamers GTX1070

57158696_ASUSRepublicofGamersGTX1070.thumb.jpg.ecae260fb3cfc239c072685944a3af8c.jpg





Pacific V-GTX 10 Series Transparent (ASUS ROG) Block

2.thumb.jpg.f03f83416a73c4f3ba60d32f3992e21b.jpg



And the 1070 ROG with the block fitted

2035295600_PacificV-GTX10SeriesTransparent(ASUSROG)Block.thumb.jpg.3b63b8b8aead66298b7092ba23ee76f7.jpg




ASUS ROG CROSSHAIR VII HERO (WI-FI)

1494065093_ASUSROGCROSSHAIRVIIHERO(WI-FI).thumb.jpg.0ce4600efd2dfbd907c84cde16c0510d.jpg



G.Skill Trident Z RGB 16GB DDR4

1656351463_G.SkillTridentZRGB16GBDDR4.thumb.jpg.1b07d5d437df0c71243221e1bf6214b3.jpg



Plextor M9Pe NVMe SSD

584601614_PlextorM9PeNVMeSSD.thumb.jpg.7022b26083238f46e1680d72039c755b.jpg

20180810_005614.jpg

Link to comment
Share on other sites

 

For one of the sides I'm making some covers, starting with the base, some clear Plexiglas that will be wrapped. 

20180731_202812.thumb.jpg.c875d9bde470a99f04b3db5c9b022f1d.jpg

 

 

Using my newest tool the 3D printers, I have made some 3D designs that will be sanded and painted then added to the Plexiglas to make the panels pop.

20180802_025426.thumb.jpg.793414a1b2da0ed389a9e3d84d4e6622.jpg


Although the Steadytech silver looked nice, I decided to prime and paint them chrome

20180808_210303.thumb.jpg.94423d26fffb77d33e779cfbb08d400b.jpg

20180808_001911.thumb.jpg.f136b601208815a4ed8586ea94f1ac75.jpg

20180808_211227.thumb.jpg.abd71b524b8987f4e0d61fa2046ecc5b.jpg


I did airbrush the design below at first but then went with changing the design to 3D to add even more depth.
To help it stand out from the chrome, this will be painted in a darker shade.

20180813_083215.thumb.jpg.6fb12c6b649c2cfecc7337a9f3a91baa.jpg

 

20180808_182626.jpg

Link to comment
Share on other sites

Although I have done some full size panther helmets, for the build i'm going with half face that will be used on the outside of the case.
I want to try keep as much of the original glass and outer case visible as possible.
20180715_203420.thumb.jpg.1519b87b005fce2656ac1303a5b0d536.jpg

 

20180716_100618.thumb.jpg.5823fa27e57dc54811e53f07db907c57.jpg

 

20180717_181615.thumb.jpg.5f121e57bb673a6f779cef49d3bf9df0.jpg

 

20180723_151751.thumb.jpg.4b3da539c34b5e3f5dc6eee8adc1f370.jpg

 

20180723_152008.thumb.jpg.2bd3f6ed578ff93b21f7e8cfcdaa2a93.jpg

 

20180725_195142.thumb.jpg.7ee9d4f26067469e00dcc599db435965.jpg

 

20180807_190421.thumb.jpg.e873174439e289268b6583b3ec520ea0.jpg



Because I like the black and gold pattern on the Killmonger I did them both.

20180807_195038.thumb.jpg.dfdbe4f359f995635c1f45d6a8e6b009.jpg

 

 

Link to comment
Share on other sites

The second part of the PSU cover, using the same design I made for the vinyl I then reworked them so they could be printed in clear steadytech PLA to add more depth to the cover/covers instead of having the usual 2D.
This will be the first time im using lighting that will be projected through the 3D prints, I have done similar with my virtual build for TT a couple of years back, but that was just a 2D version of what im doing this time.

Project Virtual (2016)
This is the look im going for, but in 3D.
20160409_145816.thumb.jpg.e8a0cf8deac5f10e8976dc3bd35a9601.jpg

 

20180722_231936.thumb.jpg.fe2b244d719daa81666099a0b58ef9ee.jpg

 

20180723_023427.thumb.jpg.11db572c590778c4c40deccf58d85183.jpg

 

20180723_024823.thumb.jpg.3b2482608788d7a7abc0c721009fb0eb.jpg

 

Link to comment
Share on other sites

Carrying-on with the designs for the front of the case, here we have MK1 set of covers, im now on to MK3 as I always see room for improvement and its hard to resist.

20180717_025458.thumb.jpg.4b0d18a349b8c2372e826e231d4a8732.jpg

As with almost all the parts for this build, lots of sanding, filling, painting and more sanding.20180717_025546.thumb.jpg.d47c6492847b659c9a262c86f439e5ce.jpg

 

 

20180723_133619.thumb.jpg.6a952626b0981839d3fab9130e6082bd.jpg

 

 

i used the black panther helmet for inspiration when making all the patterns you will see throughout the build.

20180722_235515.thumb.jpg.02d63f42b23364bb4420f776b2f373ca.jpg

 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...