Haadis Posted September 24, 2018 Report Share Posted September 24, 2018 Hello everyone I just built my first System with RGB Support on Fans and other parts in my computer. Installed three Riing Plus Fans of the System. As I have used Aquacomputer's Aquaero for many years now and I am still impressed with the possibilities, I wanted to keep the Aquaero. Aquaero does control all the fans and pumps in my system. In order to keep the Fanspeeds controlled by Aquaero I installed the Riing Plus Controller and separated the wireing. The wires for RGB are connected to the Riing Plus controller and the wires for the Fanspeed etc. are connected to the Aquaero. In the Software I needed to change from Riing Plus to PR22-D5. This workes really well, but when I start the System I get an Error Message for Controller No. 1. It's just one click and it is gone for the rest of the time, but it is annoying as #### ;-). Is there a way to turn of the Error messages? Maybe there would be another way to modd the controller 'thinking' that there is a fan onnected to the controller? Cheers Stefan Quote Link to comment Share on other sites More sharing options...
Tack Posted September 24, 2018 Report Share Posted September 24, 2018 can you post a screen shot of the Riing software after the error appears Quote Link to comment Share on other sites More sharing options...
Haadis Posted September 24, 2018 Author Report Share Posted September 24, 2018 This one gets displayed upon systemstart. One anoying time ^^. Quote Link to comment Share on other sites More sharing options...
Tack Posted September 24, 2018 Report Share Posted September 24, 2018 ahhhh you need to disable the ones that are not in use by clicking the green circle line thing once you have clicked that the green circle will turn red and be disabled and the software will no longer look for a fan/plus product on that port ThermalMike 1 Quote Link to comment Share on other sites More sharing options...
Haadis Posted September 24, 2018 Author Report Share Posted September 24, 2018 Thank you mate! Resolved! One further thing.. Is there a way to start the Software minimized to Tray? Quote Link to comment Share on other sites More sharing options...
Tack Posted September 24, 2018 Report Share Posted September 24, 2018 yes there is To make the program start up just on taskbar right click the TT rgb icon on the taskbar tray you will see a option that says "Run TT RGB Plus Program when Windows starts" It has a box next to it click it. If the box is solid like below it will open on your desktop at startup If the box is hollow like below it will start on the taskbar tray. ThermalMike 1 Quote Link to comment Share on other sites More sharing options...
ThermalMike Posted September 24, 2018 Report Share Posted September 24, 2018 Thanks for the support Tack! Tack 1 Quote Link to comment Share on other sites More sharing options...
Haadis Posted September 24, 2018 Author Report Share Posted September 24, 2018 Tack! You saved my Day!! THX for the assistance. Tack 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.