tomentus Posted November 30, 2018 Report Share Posted November 30, 2018 I was using the 360mm AIO and 5 plus fans with their original controllers but have since bought the new 9 port hub. First issue is my mobo has only 4 pin RGB headers 12v so is incompatible. Annoying as until this point i stupidly assumed aura sync was a simple 'it just works option', I was wrong. Thought for now ill forgo the RGBness to just use the hub and have Qcontrol look after the fan speeds. This doesn't work either. I have 1 PWM connector plugged into CPU FAN 1 and all three of those fans are contorlled by Qcontrol. I then have 3 plugged in via CHAFAN1 and 2 on CHAFAN2. These 2 will only PWM one fan? so i have 3 fans out of the 8 just on max!! Really dont want to go back to the original controllers unless i absolutely have to, any ideas? Quote Link to comment Share on other sites More sharing options...
tomentus Posted December 1, 2018 Author Report Share Posted December 1, 2018 Went back to the original controllers and I'll see if my wonderful CPU overheating issues come back... Quote Link to comment Share on other sites More sharing options...
BROKEN81 Posted December 3, 2018 Report Share Posted December 3, 2018 On 12/1/2018 at 5:36 AM, tomentus said: Went back to the original controllers and I'll see if my wonderful CPU overheating issues come back... Don't you have a 5V header? If so, follow this link. Solved my issues. tomentus 1 Quote Link to comment Share on other sites More sharing options...
tomentus Posted December 21, 2018 Author Report Share Posted December 21, 2018 Sadly not only 12v headers :/ thanks for the advice though Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.