BROKEN81 Posted December 1, 2018 Report Share Posted December 1, 2018 Thermaltake CL-F054-PL12SW-A 120mm RGB LED Riing Plus 12 RGB Radiator Fan TT Premium Edition (5 Fan Pack) Thermaltake Floe AIO Riing RGB 360 TT Premium Edition PWM TR4 LGA2066 Ready Liquid Cooling System CL-W158-PL12SW-A Thermaltake Riing Plus 12 RGB TT Premium Edition 120mm Software Enabled Circular 12 Controllable LED RGB Ring Case/Radiator Fan - Triple Pack - CL-F053-PL12SW-A Thermaltake CL-F059-PL12SW-A Riing Plus 12 LED RGB Radiator Fan TT Premium Edition (Single Fan Pack) ASUS ROG Crosshair VII Hero (Wi-Fi) AM4 AMD X470 SATA 6Gb/s USB 3.1 ATX AMD Motherboard My question is, will I be able to sync all of these fans? If so, do I need to buy another TT Sync Controller TT Premium Edition making it a total of 2? I only have 1 right now and I can't figure out how to get them all to sync up. This board only has 1 5V header. I'm using 3 fans on the front of the View 71, 3 on the top, 2 on the bottom, 1 for exhaust and I'm side mounting the AIO. I took the drive bays out. (The AIO I hope I configured correctly for taking air out of the View 71. So the front pulls in air, AIO takes out air, the 2 bottom fans brings in the air while the top takes out air and then back fan is exhaust.) Do I only NEED 1 TT Sync Controller TT Premium Edition and then LINK the boxed controllers that came with the fans to THE TT Sync Controller TT Premium Edition? Quote Link to comment Share on other sites More sharing options...
kewlmunky Posted December 1, 2018 Report Share Posted December 1, 2018 Unfortunately, there is no officially supported way to daisy chain the 9 port TT Sync Controller. However, you may find this thread of some use. Someone figured out how to use two of the controllers together: If you would like to use Thermaltake's software, it supports daisy chaining up to 16 of their 5 port controllers. BROKEN81 1 Quote Link to comment Share on other sites More sharing options...
BROKEN81 Posted December 2, 2018 Author Report Share Posted December 2, 2018 11 hours ago, kewlmunky said: Unfortunately, there is no officially supported way to daisy chain the 9 port TT Sync Controller. However, you may find this thread of some use. Someone figured out how to use two of the controllers together: If you would like to use Thermaltake's software, it supports daisy chaining up to 16 of their 5 port controllers. Thank you so much!!!!!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.