EthanKraus Posted December 13, 2018 Report Share Posted December 13, 2018 I’m trying to install case fans in the front of the case, but I can’t access the filter because the front of the case is blocking access to it. Apparently the front can be removed, so I was wondering how to do that. Quote Link to comment Share on other sites More sharing options...
Eddie B Posted December 9, 2019 Report Share Posted December 9, 2019 Just inside the metal part of the case the plastic front is secured with six (3 each side) plastic clips. Starting on one side and one end, pinch the two parts of the clip together and pull the front out slightly. Then work on the middle clip, then the one at the other end. Then do the same on the other side. To resecure, offer up the front and align the plastic clips with the holes, and give the edge of the front some blows with your hand. Behind the front is a clip-in panel - fans are attached to that. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.