Jump to content
Sign in to follow this  
RakeshJ

Controller issues of Riing Plus ARGB

Recommended Posts

Hello everyone,,

The ARGB controller supplied with the Riing plus12 3 pack I purchased is faulty.

Have to twist the power connector to get it to work at all.

Diassembly and inspection of the power connector shows poor soldering but it turns out this wasnt the problem.

The black plastic part of the power connector slides forward when you unplug it. See pics.

Simply pushing it back down the pins with your thumbnail solves the problem.  This can be done without disassembly. 

This rendition of the controller has no molded port numbers on the back as prevoius models do with a board revision of B Fan Box R02 2017/07/03.

Also in case no ones noticed yet the power connector on the controller uses a standard floppy drive power connector and pinout so the included power lead does not have to be used.

Both negative pins are required by the controller. If one is broken LEDs will not scroll. If 5V drops to low LEDs will not scroll.

Hope this helps someone else.....Watch Movies Online CyberGhost  ExpressVPN

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...