I'm having trouble connecting the Floe Riing 360 controller to 2 Riing plus 12 controllers

[Serhan83]

Hello I have recently installed tt floe riing 360 mm sogucu motherboard installed. I have also installed 2 riing plus 12 fan sets, but I can only see the floe riing 360 controller in the software. How can I see other controllers in the software? Not what I did. Would you please help?

[kewlmunky]

Hello.

All of the 5 port controllers will need to be either connected to a USB 2.0 header on your motherboard, or daisy chained to another controller. Then you will need to ensure each controller has a unique number (should logically do 1 - 3) via the four dip switches on the back. You included instructions will tell you how to set the numbers. Each Controller will also need to have it's own molex power cable hooked up as well.

Let me know if you have done all of this.

 

[Serhan83]

On 12/23/2018 at 2:40 AM, kewlmunky said:

Hello.

All of the 5 port controllers will need to be either connected to a USB 2.0 header on your motherboard, or daisy chained to another controller. Then you will need to ensure each controller has a unique number (should logically do 1 - 3) via the four dip switches on the back. You included instructions will tell you how to set the numbers. Each Controller will also need to have it's own molex power cable hooked up as well.

Let me know if you have done all of this.

 

Hi 

I've connected the Floe riing 360 controller to my USB 2.0 hub on my motherboard. 5 pcs. 9 pin connection on the 3 pcs of their own fans 2 sine riing plus 12 fans will install. Then the other of the USB 2.0 cable of this controller will be connected to the riing plus controller and I will install the fans on all of the 5 pin inputs on the 5 pin. So how many notches will I open behind the first controler floe riing? what next? I am making errors here and so I can not see the devices in the software.