Jump to content

#Pure (A500 build with MSI and Thermaltake)


AML Custom PC

Recommended Posts

Hey, thanks for checking out my build log for #Pure.


I couldn’t have done this build if it was not for the sponsors, MSI Thermaltake, To the wire sleeving.


[IMG]



This build will have a white, blue and frosted theme and I want the case to keep its external look and at the centre of the build it will have the Ryzen 2700x.

This is what I want to do,


[IMG]

Parts l will be using,

CPU - Ryzen 2700x

Motherboard – MSI B450 tomahawk

Ram – Corsair Vengeance RGB 16gb

Graphics card – MSI Gaming RTX 2070

Storage – Unknown

Case – Thermaltake A500

Psu – Thermaltake Toughpower grand RGB 850W

CPU Block – Thermaltake Pacific W5

Rad – Thermaltake Pacific C360

Fittings – Thermaltake C- Pro

Pump – Thermaltake Pacific P1

PCI-E Cable – Thermaltake Premium 3.0 300mm.

I don’t want to keep this build on my bench too long so I have made a design and want to stick to it, I will be re-making all of the internals and we will just be keeping the frame and the external shell.


Here are a few photos of the products,



[IMG]


[IMG]


[IMG]


[IMG]


[IMG]


[IMG][IMG]


[IMG]


[IMG]


[IMG]


[IMG]
 
 
So this is the case,
 
 
47509895372_eec90edcee_z.jpg
 
 
47509895122_d94cd9f317_z.jpg
 
 
I remove psu cover and motherboard tray.
 
 
46647306825_62cecd751c_z.jpg
 
 
I made a model out of cardboard to make sure I got the correct sizes for the perplex
 
 
46647306365_fd04fdfff5_z.jpg
 
 
After I did this I removed the IO shield and graphics card supports from the back of the case so I can move this to the top of the case.
 
 
32620301417_2772123bc8_z.jpg
 
 
33685982928_e0663d64da_z.jpg
 
 
32620301487_df84d53c54_z.jpg
 
 
46647306875_cc62bf21a2_z.jpg
 
 
Once I cut the case up I new I would need to replace the back of the case, I made a quick design on fusion 360 and made a new back panel, this will include displayport and 2 usb 3.0.
 
 
47562927081_96d5c3c950_z.jpg
 
 
33686058168_15688154e8_z.jpg
 
 
I chopped down an old bracket for the thermaltake p3 to help support the graphics cards so it can hang down in the case.
 
 
33685983748_9a22bc5fea_z.jpg
 
 
This is the point I needed to stop as I needed to pick up the perplex for the next stage of the project.
 
 
This is where we are up to.
 
 
32620301517_804f974e71_z.jpg
Link to comment
Share on other sites

  • 2 weeks later...
  • 5 months later...
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...