Jump to content

[Sri Lanka] Sanjaya Bhanu


Recommended Posts

  • 3 weeks later...

Hi Everyone, 

 

Probably you read about my Bio in the introduction section. So I will keep this short. 

First of all thank you all for checking out my worklog and thank you Thermaltake Technology for organizing this competition and giving me the opportunity to take part in it. 

Also a big thanks goes out to the sponsors,Thermaltake, AMD, Zotac, ASRock & Plextor for sponsoring us with all the components for the project.

Thank you @Tt Andy  and everyone at TT for all the support throughout all my mods and coordinating everything for the event. 


Design

For this project my plan is to do a very organic design with some inspiration from Atomic Heart for the theme. 

I want to make the build to look more like an artwork than a PC. Something that you could keep in the living room or maybe at an art exhibition ;)

In the coming few months we will go through the journey of building this concept art that I have in mind to reality. I don't wanna spoil anything for you so stay tuned for the regular updates and stay updated every step of the way. 

 

Social Media

You can follow me on any or all of the following social media channels for more updates on this project and other projects that I am working on. 

Facebook : https://www.facebook.com/kingsmod/

Instagram https://www.instagram.com/kingsmodding/

Youtube : https://www.youtube.com/channel/UCqXaStanSIk7R1IQEh2Gi6Q

 

I recently started my IG and YT channels so still slowly rolling. 

 

Hardware

Couple of days ago I received the main components from the sponsors. Following are what will be used for the build and I will buy few more components to make this a full blown high end system. 

_DSC4145.thumb.jpg.fb9d737c9fc37f8d3c07bd92da6cf628.jpg

_DSC4146.thumb.jpg.7e054dff048c8c394097abbc2938d631.jpg

_DSC4149.thumb.jpg.b4674d5478aeabff66d5eef8ad4d16f1.jpg

_DSC4151.thumb.jpg.3c096e469ca47e9f18d5023c5bd3321e.jpg

_DSC4154.thumb.jpg.4175a5c76d885ce4a43fbe11ca71386a.jpg

 

I will update you guys as soon as I get the other components. Till then, stay cool ;)

Link to comment
Share on other sites

  • 3 weeks later...
  • 2 weeks later...

Quick update for the week everyone. 

 

Started working on the front fan grills as an experiment as well as a core design testing for the whole project. 

Designed in Autodesk Fusion 360 and printed using Creallity Ender 3. (it's been printing for a while I'm starting to see some quality drop. need to fine tune it again)

 

So as the theme goes, I want things to be open in the build, and YES even more open than the Core P5 v2. so lot of cutting up ahead and lot of 3d prints :D

 

Have to say that  I am pretty happy with how it turned out and looks, but seems like I got lot of sanding and painting ahead. :(

Front.thumb.jpg.937bf92c62b0470f4556c4437a393896.jpg

P_20191009_141139.thumb.jpg.c67576839cb4011fb597da4af4724b01.jpgP_20191008_185903.thumb.jpg.f2a2bb1dc774d37e94fc8ae44b4ed6e9.jpg

P_20191009_141127.thumb.jpg.ef8fab58fab5b76a1a99c533170edb64.jpg

P_20191009_141134.thumb.jpg.001c23a40a48187b05fa19f0af8cb11b.jpg

P_20191009_141139.thumb.jpg.d31077030eb7d88b3062adc28edab0c9.jpg

P_20191009_142502.thumb.jpg.77bda890f28599bc457a7e1fb8400449.jpg

P_20191009_142505.thumb.jpg.cb9349beda0664520ef84297d885c9ed.jpg

P_20191009_142513.thumb.jpg.67ef5bb2f3cb198a6d6848e49bb4c208.jpg

Link to comment
Share on other sites

  • 2 weeks later...

Hi All, 

 

With another weekly update here. I am quite behind schedule so I will speed up my work in the coming too weeks. Expect lot more photos and progress within the month of November. 

So once the 3D prints for the two radiator fan grills  for  two 480mm radiators were finished, I glued the pieces together and brushed on some filler. 

Tried our sanding the parts down but it seems I need to do a patch up job for some parts.

For printing these parts i tried octoprint with raspberry pi (old model) I think because of the slow CPU, some parts came out very rough and unfinished. so that means more sanding for me 😢 

I cut the top mounting piece of the fan to check whether I can further integrate the grill closer to the fans and as one piece. I will make the decision on whether to do this or not as we proceed. What do you guys think?

Attached are the picture of this week :) 

peace V

P_20191028_205900.thumb.jpg.a1a659ca27c7b12645db7cb7e5a12cd2.jpg

P_20191028_210046.thumb.jpg.4160fcc544103bc73cbdb7d5efd91c89.jpg

P_20191028_210002.thumb.jpg.d7a61f19d78f3cc335b721f20950063f.jpg

P_20191028_205935.thumb.jpg.755422613449ed6b2d35caadbeb8c80c.jpg

P_20191028_205926.thumb.jpg.49a640adbecab26a0c0260206ef2c9c9.jpg

P_20191028_210009.thumb.jpg.2326712bc37a14c1fd6987b287806a1a.jpg

P_20191028_205907.thumb.jpg.758692cd30ae0b07b954efbb34b29249.jpg

P_20191028_205939.thumb.jpg.a7f9f9792cf952d21cc2ef916bae7e5e.jpg

P_20191028_205956.thumb.jpg.4e795674dc7119f6abfd7990da5ea2fd.jpg

Link to comment
Share on other sites

  • 3 weeks later...
  • 3 weeks later...
  • 2 weeks later...
  • 2 weeks later...
On 12/14/2019 at 3:10 AM, liquidcooledbrain said:

Nice bro!

Thanks bro :)

Finally after the business trip all over Europe, i had some time to finish off the Mod and take some Photos. I will shoot a video tomorrow and share with you guys as well. 

I had to do some fine tuning and modify the distro to correct the water flow and reduce air bubbles going into the pump, So here we go with the final images. 

_DSC6946.thumb.jpg.e2a12f7a07948fbe9114100b28ef8cdd.jpg

_DSC6903.thumb.jpg.8e6b1bf0d1000a5efdcbfbe8a5abb9a5.jpg

_DSC6925.thumb.jpg.0ea029fae67e39e4a5d82eeaf0279f06.jpg

_DSC6935.thumb.jpg.4a811e14ce2f505932bed6a64dfdfb08.jpg

_DSC6928.thumb.jpg.5d8be674b41de6ece51993fbc3bdad1e.jpg

_DSC6909.thumb.jpg.84a0cac79876e74a5878b416db2a82da.jpg

_DSC6888.thumb.jpg.912874da05f56a3beb6f2d9335ddf879.jpg

_DSC6882.thumb.jpg.90d9fd3f54ae7c8ed0f71839ec2ee7ee.jpg

_DSC6864.thumb.jpg.6a9d659663e916f8ef5576473cea99e9.jpg

_DSC6856.thumb.jpg.718b533590b4adc9c04a4c04866ba383.jpg

_DSC6890.thumb.jpg.b1c6627285057295f03ced52dbeffe5a.jpg

_DSC6897.thumb.jpg.012b59855a44237419784dd6bb7fff4f.jpg

_DSC6868.thumb.jpg.cd86938a649c02a1afca06247933e7ae.jpg

 

 

_DSC6860.jpg

Link to comment
Share on other sites

On 12/23/2019 at 1:00 AM, Juggapat said:

Good job bro! :D

 

On 12/23/2019 at 4:00 AM, Erik Bmods said:

Congratz San. You killed it!

 

On 12/23/2019 at 4:25 AM, ZenModz said:

Very nice, Congrats. :)

 

On 12/23/2019 at 5:07 PM, Sutisna M said:

Goodjob! Clean & Coolest Design!

 

On 12/24/2019 at 8:31 AM, ramdom said:

good job!

Thank you so much everyone  ❤️

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...