Leppylep Posted December 5, 2019 Report Share Posted December 5, 2019 Im trying to find out what kind of screws are used on the RL360 Rads? Someone mentioned 6-32 screws but those are to big. does someone here know what screws? Im trying to mount my resivor/pump combo to the rad but the screws that come with the rad are to short. and even if i wanted to mount it on the fans then to the rad the long screws that come with it would be short as well Quote Link to comment Share on other sites More sharing options...
Gleb Abramov Posted May 24, 2020 Report Share Posted May 24, 2020 +1! Have the same issue: I have bought 6-32 30 mm screws to install Pure Plus 140mm on the X71 & Pacific CL 420. 6-32 are defenitely too big. What size have the original screws that have been provided with CL 420? (I have used all 12 to fix another 3 Pure Plus 140mm on the other side). (The screws I seek are (A) on the image) _0794c49cdb0a4ddebe04f59ca5c6fb46.pdf Quote Link to comment Share on other sites More sharing options...
Tom Gunn Posted November 30, 2020 Report Share Posted November 30, 2020 BUMP! Has anyone solved this because I've got the same issue with the CL480 rad. Im trying to run it with a push/pull fan setup but cant find the right screws for the threading. I bough a bunch of 6-32 but the thread was too fat. My best guess would be that they're metric m3x30mm but if someone could confirm that id really appreciate it before I drop $25 on more screws from amazon lol. Thanks fam! Quote Link to comment Share on other sites More sharing options...
Grey Buckleton Posted January 10, 2021 Report Share Posted January 10, 2021 (edited) I also have this issue as I own the radiator but can't mount the fans as there are no screws. Customer support does not seem to know what the screws are. I'm finding it very difficult to get an actual screw spec off them. We are 8 emails in and this is the best I have. "We suggest trying to see if Bunnings has fittable screws as the price for just the shipping fees would be insensible. The length of the M3 screws used for the fans is approximately 35mm. Best Regards, Thermaltake ANZ - Support" Edited January 10, 2021 by Grey Buckleton spelling Quote Link to comment Share on other sites More sharing options...
Crashcar02 Posted December 1, 2022 Report Share Posted December 1, 2022 https://www.amazon.com/iExcell-Internal-Button-Screws-Finish/dp/B075CFBHWV/ref=sr_1_4?keywords=M3+x+30mm+screw&qid=1669860043&sr=8-4 Quote Link to comment Share on other sites More sharing options...
TreyMitchelle Posted July 27, 2023 Report Share Posted July 27, 2023 I had the same issue with my Pacific RL360 radiator screw threads. What worked for me was using a tap and die set to clean up the threads gently. Quote Link to comment Share on other sites More sharing options...
MaxForsyth Posted July 27, 2023 Report Share Posted July 27, 2023 Hey there! It's happened to me before, and it can be such a pain! One thing I tried was using some silicone grease or lubricant on the threads to make them smoother, which seemed to help a bit. And if you're up for it, you could also look into getting replacement screws from hardware stores or online shops. I've found some good options at places like Scrooz (https://www.scrooz.com.au/), which has a variety of screws and fasteners. Anyway, I hope that helps you out with your radiator. Sometimes it can be difficult to solve the problem without the help of professionals. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.